Временная ошибка при разрешении archive raspberrypi org

I have raspberry pi 3. And I can’t even update it because when I do the update screen is held at archive.raspberrypi.org. I tried to open it in browser, the site is down. What should I do?

And yeah it is perfectly online.

asked Aug 24, 2016 at 15:22

The SuperKat's user avatar

1

temporarily disabling ipv6 solved my issue (temporarily)

apt -o Acquire::ForceIPv4=true update

answered May 4, 2018 at 20:19

David Schumann's user avatar

David SchumannDavid Schumann

13.1k9 gold badges72 silver badges95 bronze badges

From my point, the site is online. Are you sure your Raspberry is connected to the internet?

Also http://www.downforeveryoneorjustme.com/archive.raspberrypi.org says it is online.

Edit:

Check your /etc/hosts file for entries which change the location of the Domain in question.

answered Aug 24, 2016 at 15:24

DBX12's user avatar

DBX12DBX12

2,0411 gold badge15 silver badges25 bronze badges

4

Check the storage of your sd card. If you have a lot of information on it, it might slow down or stop working. If you have a lot of information, you have 2 options:

  1. Remove unwanted information
  2. Install a fresh OS image on it

answered Sep 3, 2016 at 20:55

Agastya Asthana's user avatar

Hey folks

I’m having some problems with my Pi, so need to grab some help from you knowledgable lot!

Basically, I’m having troubles with my Pi resolving *.raspberrypi.org I first noticed it yesterday, but thought, as per the error message, that it was a temporary issue. It’s still the same today though.

Code: Select all

Err:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
  Temporary failure resolving 'raspbian.raspberrypi.org'
Err:2 http://archive.raspberrypi.org/debian buster InRelease
  Temporary failure resolving 'archive.raspberrypi.org'

I came across a similar thread on here with some useful advice (viewtopic.php?t=298712) and have followed the advice to generate the following:

Code: Select all

ping -c3 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=116 time=7.09 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=116 time=6.34 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=116 time=6.61 ms

--- 8.8.8.8 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 6.344/6.681/7.092/0.309 ms

Code: Select all

ifconfig
enxb827ebc11611: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.100  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 2001:4d48:ad5c:e200:dde4:7fee:3d83:3499  prefixlen 64  scopeid 0x0<global>
        inet6 fe80::9739:8ee0:4cbb:7b0d  prefixlen 64  scopeid 0x20<link>
        ether b8:27:eb:c1:16:11  txqueuelen 1000  (Ethernet)
        RX packets 521498  bytes 89026036 (84.9 MiB)
        RX errors 0  dropped 10  overruns 0  frame 0
        TX packets 249015  bytes 33439761 (31.8 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 6479974  bytes 533960898 (509.2 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 6479974  bytes 533960898 (509.2 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Code: Select all

ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enxb827ebc11611: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether b8:27:eb:c1:16:11 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.100/24 brd 192.168.1.255 scope global dynamic noprefixroute enxb827ebc11611
       valid_lft 65212sec preferred_lft 54412sec
    inet6 2001:4d48:ad5c:e200:dde4:7fee:3d83:3499/64 scope global dynamic mngtmpaddr noprefixroute
       valid_lft 86147sec preferred_lft 14147sec
    inet6 fe80::9739:8ee0:4cbb:7b0d/64 scope link
       valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether b8:27:eb:94:43:44 brd ff:ff:ff:ff:ff:ff

Code: Select all

ip route
default via 192.168.1.1 dev enxb827ebc11611 proto dhcp src 192.168.1.100 metric 202
192.168.1.0/24 dev enxb827ebc11611 proto dhcp scope link src 192.168.1.100 metric 202

Code: Select all

ping -c3 $(ip route | awk '/default/ {print $3}')
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.653 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.580 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=0.584 ms

--- 192.168.1.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2069ms
rtt min/avg/max/mdev = 0.580/0.605/0.653/0.033 ms

Does any of this allow you to see what the issue might be?

Thanks in advance for any advice offered!


Я попытался установить python-pip, набрав эту команду:

sudo apt-get install python-pip

И результат ниже:

Err http://mirrordirector.raspbian.org/raspbian/ wheezy/main python2.6-minimal armhf 2.6.8-1.1
  Temporary failure resolving 'mirrordirector.raspbian.org'
Err http://mirrordirector.raspbian.org/raspbian/ wheezy/main python2.6 armhf 2.6.8-1.1
  Temporary failure resolving 'mirrordirector.raspbian.org'
Err http://mirrordirector.raspbian.org/raspbian/ wheezy/main python-pkg-resources all 0.6.24-1
  Temporary failure resolving 'mirrordirector.raspbian.org'
Err http://mirrordirector.raspbian.org/raspbian/ wheezy/main python-setuptools all 0.6.24-1
  Temporary failure resolving 'mirrordirector.raspbian.org'
Err http://mirrordirector.raspbian.org/raspbian/ wheezy/main python-pip all 1.1-3
  Temporary failure resolving 'mirrordirector.raspbian.org'
Failed to fetch http://mirrordirector.raspbian.org/raspbian/pool/main/p/python2.6/python2.6-minimal_2.6.8-1.1_armhf.deb  Temporary failure resolving 'mirrordirector.raspbian.org'
Failed to fetch http://mirrordirector.raspbian.org/raspbian/pool/main/p/python2.6/python2.6_2.6.8-1.1_armhf.deb  Temporary failure resolving 'mirrordirector.raspbian.org'
Failed to fetch http://mirrordirector.raspbian.org/raspbian/pool/main/d/distribute/python-pkg-resources_0.6.24-1_all.deb  Temporary failure resolving 'mirrordirector.raspbian.org'
Failed to fetch http://mirrordirector.raspbian.org/raspbian/pool/main/d/distribute/python-setuptools_0.6.24-1_all.deb  Temporary failure resolving 'mirrordirector.raspbian.org'
Failed to fetch http://mirrordirector.raspbian.org/raspbian/pool/main/p/python-pip/python-pip_1.1-3_all.deb  Temporary failure resolving 'mirrordirector.raspbian.org'
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

Тогда я попытался sudo apt-get update и sudo apt-get update --fix-missing, но это тоже не работает.

Результат был таким:

Err http://raspberrypi.collabora.com wheezy Release.gpg
  Temporary failure resolving 'raspberrypi.collabora.com'
Err http://archive.raspberrypi.org wheezy Release.gpg
  Temporary failure resolving 'archive.raspberrypi.org'
Err http://mirrordirector.raspbian.org wheezy Release.gpg
  Temporary failure resolving 'mirrordirector.raspbian.org'
Reading package lists... Done
W: Failed to fetch http://mirrordirector.raspbian.org/raspbian/dists/wheezy/Release.gpg  Temporary failure resolving 'mirrordirector.raspbian.org'

W: Failed to fetch http://raspberrypi.collabora.com/dists/wheezy/Release.gpg  Temporary failure resolving 'raspberrypi.collabora.com'

W: Failed to fetch http://archive.raspberrypi.org/debian/dists/wheezy/Release.gpg  Temporary failure resolving 'archive.raspberrypi.org'

W: Some index files failed to download. They have been ignored, or old ones used instead.

Как я могу решить эту проблему?






Ответы:


Похоже, у вас возникли проблемы с разрешением различных URL-адресов, которые получает apt-get.

Я бы попробовал следующее:

1.) Убедитесь, что у вас есть активное подключение к Интернету, попробуйте google.com со вторым компьютером, например. 2.) Если Raspberry Pi подключен к домашнему маршрутизатору, проверьте, что ему присвоен IP-адрес. 3.) Попробуйте выполнить команду pinging google.com из командной строки:

ping google.com

Вы должны увидеть что-то вроде:

PING google.com (74.125.226.233): 56 data bytes
64 bytes from 74.125.226.233: icmp_seq=0 ttl=56 time=3.281 ms
64 bytes from 74.125.226.233: icmp_seq=1 ttl=56 time=4.058 ms
64 bytes from 74.125.226.233: icmp_seq=2 ttl=56 time=3.999 ms

Если это не работает, то это может быть либо ваше интернет-соединение, либо проблема с DNS.

При возникновении проблем с DNS убедитесь, что ваш файл resolv.conf настроен правильно (если вы назначили серверы имен вручную):

/etc/resolv.conf

Если вы используете DHCP, resolv.conf должен обновляться автоматически.






Пытаться

sudo apt-get update

с последующим

sudo apt-get upgrade

и затем повторите попытку установки python-pip.

Я исправил ту же проблему, что и неделю назад.






У меня была точно такая же проблема, после ошибки, сделанной при установке фиксированных IP-адресов для моих сетевых адаптеров. sudo nano /etc/network/interfacesотредактировать и убедиться, что для одного адаптера нет двух одинаковых IP-адресов. У меня была широковещательная рассылка и шлюз по тому же адресу, но это убило доступ в интернет.

Также, если вы используете Pi как с сетевым кабелем, так и без него, но всегда с wlan-адаптером, вам необходимо установить маску сети, сеть, широковещательную рассылку и шлюз для обоих адаптеров.


Я только что обнаружил, что мой не будет обновляться при использовании моего адаптера Wi-Fi. У меня есть фиксированный IP-адрес, поэтому я не уверен, что это потому, что я использую адаптер Wi-Fi или у меня фиксированный IP-адрес. Подумал, что это может помочь некоторым людям, так как я обнаружил, что, когда я снова подключил кабель локальной сети и удалил адаптер Wi-Fi USB, он работал нормально.


Я бы порекомендовал проверить ваши настройки времени и даты на вашем Pi .

Неправильное время или дата влияют на загрузку файлов, размещенных на сертификате.

Для проверки просто загрузитесь на рабочий стол «startx» и нажмите на время на панели инструментов. Это скажет время и дату!


This tutorial will show you step by step what to do when you try to update Raspberry Pi OS and get the following error: Failed to fetch http://archive.raspberrypi.org/debian/….

Steps

1. Open the terminal.

2. Type the following command:

sudo nano /etc/apt/sources.list.d/raspi.list

3. Press Enter.

4. Change the URL to https. Change http://archive.raspberrypi.org/debian/ to https://archive.raspberrypi.org/debian/.

5. Press the Ctrl + O key to write out.

6. Press Enter.

7. Press the Ctrl + X key to exit.

8. Restart your Raspberry Pi.

9. Open the terminal.

10. Try to update now.

sudo apt update
sudo apt full-upgrade

Read more articles about Linux

У меня есть Raspberry Pi 3. И я даже не могу обновить его, потому что когда я делаю это, экран обновления находится на archive.raspberrypi.org. Я пытался открыть его в браузере, сайт не работает. Что я должен делать?

И да, это совершенно онлайн.

2016-08-24 15:22

3
ответа

Временное отключение ipv6 решило мою проблему (временно)

apt -o Acquire::ForceIPv4=true update

2018-05-04 20:19

С моей точки зрения, сайт в сети. Вы уверены, что ваш Raspberry подключен к Интернету?

Также http://www.downforeveryoneorjustme.com/archive.raspberrypi.org говорит, что это онлайн.

Редактировать:

Проверьте файл / etc / hosts на наличие записей, которые изменяют местоположение рассматриваемого домена.

2016-08-24 15:24

Проверьте хранение вашей SD-карты. Если у вас есть много информации, это может замедлиться или перестать работать. Если у вас много информации, у вас есть 2 варианта:

  1. Удалить нежелательную информацию
  2. Установите на нее свежий образ ОС

2016-09-03 20:55

sorry i am a newbie, when i want to sudo apt-get update i can’t connect to raspbian.raspberrypi.org, and when i click the link is not responding, but when i use my handphone to acces the link with vpn it is worked, should i use vpn on raspberry pi, and how to use vpn in raspberry pi

Err:1 http://raspbian.raspberrypi.org/raspbian stretch InRelease               
  Could not connect to raspbian.raspberrypi.org:80 (2a00:1098:0:80:1000:75:0:3). - connect (101: Network is unreachable) Could not connect to raspbian.raspberrypi.org:80 (93.93.128.193), connection timed out
Err:2 http://archive.raspberrypi.org/debian stretch InRelease                  
  Could not connect to archive.raspberrypi.org:80 (2a00:1098:88:26::1). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:80:1000:13:0:6). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:82:1000:13:0:7). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:82:1000:13:0:6). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:80:1000:13:0:5). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:80:1000:13:0:8). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:82:1000:13:0:5). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:82:1000:13:0:9). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:80:1000:13:0:7). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (93.93.135.188), connection timed out Could not connect to archive.raspberrypi.org:80 (93.93.130.39), connection timed out Could not connect to archive.raspberrypi.org:80 (93.93.128.230), connection timed out Could not connect to archive.raspberrypi.org:80 (93.93.130.214), connection timed out Could not connect to archive.raspberrypi.org:80 (93.93.128.133), connection timed out Could not connect to archive.raspberrypi.org:80 (46.235.227.11), connection timed out Could not connect to archive.raspberrypi.org:80 (46.235.231.111), connection timed out Could not connect to archive.raspberrypi.org:80 (93.93.128.211), connection timed out Could not connect to archive.raspberrypi.org:80 (93.93.130.104), connection timed out
Reading package lists... Done                                          
W: Failed to fetch http://raspbian.raspberrypi.org/raspbian/dists/stretch/InRelease  Could not connect to raspbian.raspberrypi.org:80 (2a00:1098:0:80:1000:75:0:3). - connect (101: Network is unreachable) Could not connect to raspbian.raspberrypi.org:80 (93.93.128.193), connection timed out
W: Failed to fetch http://archive.raspberrypi.org/debian/dists/stretch/InRelease  Could not connect to archive.raspberrypi.org:80 (2a00:1098:88:26::1). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:80:1000:13:0:6). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:82:1000:13:0:7). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:82:1000:13:0:6). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:80:1000:13:0:5). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:80:1000:13:0:8). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:82:1000:13:0:5). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:82:1000:13:0:9). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (2a00:1098:0:80:1000:13:0:7). - connect (101: Network is unreachable) Could not connect to archive.raspberrypi.org:80 (93.93.135.188), connection timed out Could not connect to archive.raspberrypi.org:80 (93.93.130.39), connection timed out Could not connect to archive.raspberrypi.org:80 (93.93.128.230), connection timed out Could not connect to archive.raspberrypi.org:80 (93.93.130.214), connection timed out Could not connect to archive.raspberrypi.org:80 (93.93.128.133), connection timed out Could not connect to archive.raspberrypi.org:80 (46.235.227.11), connection timed out Could not connect to archive.raspberrypi.org:80 (46.235.231.111), connection timed out Could not connect to archive.raspberrypi.org:80 (93.93.128.211), connection timed out Could not connect to archive.raspberrypi.org:80 (93.93.130.104), connection timed out
W: Some index files failed to download. They have been ignored, or old ones used instead.

У меня есть raspberry pi 3. И я даже не могу его обновить, потому что когда я это делаю, экран обновления находится на archive.raspberrypi.org. Я пытался открыть его в браузере, сайт не работает. Что я должен делать?

И да, это совершенно онлайн.

3 ответа

Временное отключение ipv6 решило мою проблему (временно)

apt -o Acquire::ForceIPv4=true update


2

David Schumann
4 Май 2018 в 23:19

С моей точки зрения, сайт онлайн. Вы уверены, что ваш Raspberry подключен к Интернету?

Также http://www.downforeveryoneorjustme.com/archive.raspberrypi.org говорит, что это онлайн.

Изменить:

Проверьте свой файл /etc/hosts на наличие записей, которые изменяют местоположение рассматриваемого домена.


0

DBX12
27 Авг 2016 в 10:35

Проверьте память вашей SD-карты. Если у вас много информации о нем, он может замедлиться или перестать работать. Если у вас много информации, у вас есть 2 варианта:

  1. Удалить ненужную информацию
  2. Установите на него свежий образ ОС


0

Agastya Asthana
3 Сен 2016 в 23:55

In this segment, we are going to explain “How to fix Could not resolve ‘archive.raspberrypi.org‘ for OpenMediaVaultRaspberry Pi | Ubuntu

Equipment Required Optional
Raspberry Pi Raspberry Pi 4 Case
SD_Card SD Card Raspberry Pi Keyboard
Ethernet Ethernet Cable Mouse
Charger Power Adapter    
HDD External HDD    
Shop now

We all got confused when your Raspberry Pi or any other Linux machine stop getting updates or refused to connect to the download server. Then we start checking our internet connection and look around for solutions, but the problem resides inside the PC itself.

First, let me explain to you why this problem actually occurs. This is a really common issue generated by the operating system itself.  The operating system makes a backup of the DNS resolve file, then OS is not able to get the updates from the server.

So, I will explain to you two ways to resolve this issue.

Step-1:

  • In this step, we need to create a new file so our system can connect to the DNS server.
sudo nano /etc/resolv.conf
  • Now you will see a blank screen then we need to type:
nameserver 8.8.8.8
  • After that press CTRL+X and then Y to save the file. Once this step finishes you can try to update your system.

Step-2:

  • In this step, we are going to change the backup file name to its original name.
sudo mv /etc/resolv.conf.bak /etc/resolv.conf
  • This step will change the file name to its original name, after this step you can reboot your system and check for updates.

In conclusion

  • You are all set to use your Raspberry Pi again.
  • Please share your valuable feedback about the article.

Need to go through Posts

  • How to install OpenMediaVault 5 on Raspberry Pi All Models
  • OpenMediaVault 5 NAS Server on Raspberry Pi 4

Did you find us helpful?

Post author avatar

Harish Kumar

As a founder of the PcMac YouTube channel and website, Our goal is to provide Free Technical help to people and spread knowledge to everyone.

1 ответ

Это похоже на сетевую проблему. Вы правильно настроили сеть? Можете ли вы ping google.com например?

Koxo
05 дек. 2018, в 06:25

Поделиться

Ещё вопросы

  • 1соответствие хэстэгу, упоминанию, URL и специальным символам из твита данных
  • 1Как установить свойство Valuse элемента списка, чтобы исправить идентификатор из строки таблицы базы данных?
  • 0preg_match всегда возвращает 0
  • 0AngularJS получает доступ к ‘this’ в пределах $ http
  • 0jQuery + HTML: использование кнопки или
  • 0Как скрыть / показать форму, используя jQuery в следующем сценарии?
  • 1Добавить String в ArrayList, если только не пустой
  • 0Как получить список предметов из одной таблицы и общее количество связанных с ними предметов из пыльника в mySql?
  • 0используйте change () для обнаружения изменений значения атрибута
  • 1Как читать PDF-файлы на азиатских языках (китайский, японский, тайский и т. Д.) И хранить их в виде строки в python
  • 02D массив не заполняется правильно или …? C ++
  • 0Как обернуть группу тегов HTML в содержащий тег, используя JavaScript?
  • 0тип начала эффекта (HTML, CSS, JQUERY)
  • 0jQuery CSS удалить отрицательное значение
  • 0PHP вставить массив входных данных, используя foreach
  • 0Как мне очистить эти вложенные циклы?
  • 0Управление памятью с помощью std :: vector <Eigen :: MatrixXd>
  • 0Как нажать в AngularJS
  • 1Новое приложение для замораживания ниток
  • 0Как переименовать ссылки с вопросительным знаком?
  • 1Почему класс YUIJsCompressorProcessor не включен ни в ядро, ни в расширения jar для wro4j?
  • 0В каком формате создается ссылка href с использованием переменной?
  • 1Android Constraint Layout alignemnt
  • 0Войдите в систему с помощью JWT (веб-токена Json) и приложения Devise in Rails
  • 1Ошибка совпадения строки со списком строк с использованием extractOne () из fuzzywuzzy в python
  • 1Каков наилучший способ построить набор объектов динамической длины в Java?
  • 0Печать вектора C ++ с добавлением новой строки
  • 1Ошибка в библиотеке, созданной с помощью jitpack: невозможно разрешить зависимость для ‘: app @ debug / compileClasspath’
  • 1CSV писать альтернативные пробелы в строках внутри цикла Python
  • 0Манипулирование DOM в директиве Angular после рендеринга под-представления
  • 1добавить текстовую область в Java из другого файла Java
  • 0Риск запуска cronjob каждую минуту
  • 1В чем разница между расширением MultiDexApplication и MultiDex.install (это)?
  • 0комплектация не работает
  • 0JQuery Datepicker — ограничить опции TIME
  • 1Получить историю уведомлений от Firebase
  • 1Как поделиться чем-то, используя приложение Twitter на Windows Phone 8?
  • 0Сохраняйте отзывчивые встроенные блоки расположенными с помощью переносимых текстовых слов
  • 1MVC Solution установлен в формат даты США
  • 1Firebase Username / Password Authentication — разрешить вход только одному устройству одновременно
  • 1Сортировка объекта массива в JavaScript
  • 0Не отображаются средние значения для пользователей с более чем одним экземпляром
  • 1Websocket не может установить соединение
  • 0Объединить несколько таблиц MySQL
  • 1Запустите одно приложение метро из другого приложения метро Windows 8
  • 1Создание экземпляра класса в цикле и его обновление
  • 0получение функции из класса не работает
  • 1Чтение из нескольких обменов RabbitMQ в клиенте Java не опрос
  • 1получить доступ к банку в проекте из импортированной библиотеки — gradle / android studio
  • 1Фрагменты не меняются при открытии клавиатуры

Сообщество Overcoder

Возможно, вам также будет интересно:

  • Временная ошибка попробуйте еще раз mega
  • Временной цейтнот лексическая ошибка или нет
  • Временная ошибка сервера повторите попытку позднее
  • Временная ошибка повторите попытку позже lg
  • Временная ошибка на стороне банка эмитента

  • Понравилась статья? Поделить с друзьями:
    0 0 голоса
    Рейтинг статьи
    Подписаться
    Уведомить о
    guest

    0 комментариев
    Старые
    Новые Популярные
    Межтекстовые Отзывы
    Посмотреть все комментарии