Ошибка this utility is not for this platform

The ASRock Polychrome RGB is a beautiful utility that gives you complete control over the RGB components of your PC if they are compatible with it. However, life becomes difficult when you start facing issues while using the applications, which does not allow you to take full benefit from your RGB components.

If you have made your way to this page because you are facing issues with the ASRock Polychrome RGB, do not worry, as you aren’t the first one here. Lots of users complain about issues with the Software and face various problems in Syncing effects, Not Detecting RGB Sync, Access Violation at Address, and more which are some fundamental errors.

Although these errors might be frustrating, there’s no need to panic as we have got you covered with some definitive and straightforward fixes that will get you rolling. Also check How To Download And Use ASRock Polychrome RGB Sync.

So let’s begin.

ASRock Polychrome RGB – What Is It?

The ASRock Polychrome RGB is a software that gives you complete control over your RGB illuminations, allowing you to customize and sync the RGB components to your liking. The Software is straightforward to use and provides a user-friendly environment.

This Software syncs your motherboard with all the PC components such as RGB PC case, CPU cooler, CPU Fans, RGB keyboards, and so much more, allowing you to customize the illumination effects to your own liking from a wide range of possibilities. You also get to choose super cool lighting effects like Water, Rainbow, Cycling, Strobe, Cram, and many more, consisting of 15 effects.

Your RGB devices can also be synced with Polychrome RGB-certified Accessories. This will allow you to take your gaming experience to a whole different level, providing astonishing performance and exceptional aesthetics lighting up your PC brilliantly.

Reasons Why ASRock Polychrome RGB Is Not Working

As ASRock states it, the ASRock Polychrome Sync is manufactured with creativity, consideration, and cost-effectiveness. This is a great application that gives you total control over your RGB lighting. But not everything is perfect. Users have reported many issues with the ASRock Polychrome RGB, and there are some reasons that cause those issues and must be addressed.

The ASRock Polychrome RGB software will never work if you are using any other motherboard besides ASRock. Before you do anything, you must make sure all your RGB components are compatible, as incompatibility is one of the most common reasons people face issues. This renders your RGB lightings useless.

The following are some of the most commonly faced errors reported by users:

1. At times, a common message will appear showing This Utility Is Not For This Platform.
2. The system might show the error message This MCU is empty. Please restart the utility while starting.
3. You might face Error 0xfffb, which indicates no ASR graphic card and ASR USB Header is detected.
4. Most users commonly face Access Denied or Access Violation at address.
5. Sometimes, the Software freezes your system and causes it to stop working.

The errors may be caused due to various reasons. At times it might be a human error that might be caused simply by improperly connecting the RGB headers. There might also be an error due to a Machine defect caused by a faulty product.

Another reason for issues might be faulted in the Software. For example, Software might have bugs or clash with other programs, which cause different problems. However, the most common issues faced by users are usually Software related.

Don’t you worry, as we have prepared different definitive fixes that will get you rolling again.

Why Do I Keep Witnessing Access Violation At Address 000000FF. Read of address 000000FF

The access violation message alerts you that the ASRock Polychrome Sync software is unable to link up with the RGB control center of your motherboard. Though the ASRock Polychrome RGB is a great application, sometimes users do face these errors, which might be caused by improper implementation of the RGB control center.

Additionally, components that are incompatible with each other are in no way going to function. Therefore, make sure your hardware is compatible.

Steps To Perform Before You Start Fixing ASRock Polychrome RGB

Before you proceed to directly fix the ASRock Polychrome RGB software, you should take care of the following steps first.

1. You must install the latest version of the ASRock Polychrome RGB from the official website.
2. Check whether your motherboard along with all the other components, are compatible with Polychrome Sync or not.
3. Plug the RGB Headers correctly into your motherboard.
4. If you have any other RGB software installed, make sure you uninstall it to avoid clashes.
5. Make sure the PSU you are using is good enough to light your RGBs

Fixing ASRock Polychrome RGB Motherboard Errors

Now that we have everything in place, we proceed on to fix the ASRock Polychrome RGB not working.

Follow the steps below, and you’ll be all set in no time:

1. But, first, download and Install the ASRock Polychrome RGB application with default settings.
2. To open the Run, press Windows + R.
3. In the Run, type cmd and click on OK.
4. Write the following command in the Command Prompt Window and then hit enter: cd C:Program Files (x86)ASRock UtilityASRRGBLEDBin.
5. In the same way, run all the following commands:

C:Windowssystem32>wICPFLASH.exe /File=nu51_1.08

C:Windowssystem32>wICPFLASH.exe /File=nu51_1.10

C:Windowssystem32>wICPFLASHADSBv2.exe /File-nu51_2.06

C:Windowssystem32>wICPFLASHADSB.exe /File=nu51_2.07

• You can now close the Command Prompt.
• Click on Ctrl + Shift + Esc, which will launch the Task Manager.
• Find your way to the Startup Tab and Enable Polychrome Sync while disabling all other RGB applications.
• Now go on and run ASRock Polychrome RGB as an administrator.

And there you have it. So that’s how you fix ASRock Polychrome RGB not working.

Fix For ASRock Polychrome RGB Not Detecting Devices

Errors like this one are usually caused if your RGB components are not connected properly. They might also because if your RGB devices are not compatible with the ASRock Polychrome RGB. So, first of all, make sure everything is connected in place, and all the hardware is compatible.

If the error persists, follow the steps below to quickly fix this issue:

1. Launch the control panel and uninstall the ASRock Polychrome RGB utility first.
2. Find your way to C:Program Files (x86). Now delete the ASRock Utility file.
3. From the official website, download the most updated version of the ASRock Polychrome RGB software. Complete the installation process and then restart your PC.
4. Now run ASRock Polychrome RGB as the Administrator.
5. Make your way to C:Program Files (x86)ASRock UtilityASRRGBLEDBin.
6. To flash the firmware, click WriteFW.BAT.

And that’s how you get the job done. The issue of ASRock Polychrome RGB not detecting devices should be fixed now. But above everything, you must make sure all your PC components are compatible with the Software, and everything is in place. That’s the most crucial thing to consider.

Changing Color in ASRock Polychrome RGB

Now that we have dealt with all the errors and got out of that mess, we can now move on to enhancing your gaming experience by changing colors in the ASRock Polychrome RGB software. This will allow you to create mind-blowing effects that will take your aesthetics and experience to a whole new level.

The following steps show how to change colors in ASRock Polychrome RGB:

1. First, select the peripheral you prefer to change the RGB settings.
2. Now you must select the specific RGB component.
3. You can change the saturation and hue according to your preference by dragging on the color wheel. You can also change the specific RGB values by dragging on the RGB sliders.
4. The toggle switch present at the bottom right will allow you to enable or disable LEDs.
5. You can alter the lighting styles and effects using the dropdown menu.
6. The LED speeds can be changed by moving the speed ratio button to the left or right.
7. After completing your customization, you can click apply and save the settings you have changed.

How To Reset My ASRock RGB?

You can easily reset the Polychrome Sync settings by erasing the data from C:Program Files (x86)ASRock UtilityASRRGBLEDConf.

FAQs

Why is my Polychrome Sync not detecting any device/motherboard?

The polychrome might not detect the device if it’s incompatible with it. Also, it might require a flash to the motherboard RGB Module manually.

Does ASRock support RGB?

Yes, ASRock does support RGB. It has a wide range of RGB compatible products.

What is ASRock utility?

The ASRock utility or ASRock Polychrome Sync is a software designed to give you complete control over your RGB components.

Wrapping It Up

ASRock is one of the world’s most popular hardware manufacturers and is famous for its RGB components. And to control the RGB components, ASRock has designed its own utility software making life easy. However, users face some issues frequently, which ASRock will try to address. But until then, we can count on some fixes to keep us going.

This comprehensive guide has walked you through everything you need to know if you plan on fixing an issue with the Software. We stated the possible reasons for those issues along with the definitive fixes that will get you going. Make sure you follow through with the steps carefully for the fixes to work correctly.

We hope this guide would have solved all your problems, and you’ll be able to use the ASRock utility without any hurdles.

[SOLVED] ASRock Polychrome RGB Not Working

Are you unable to sync your RGB effects on the ASRock Polychrome motherboard and other PC components?

Do not worry if you face ASRock Polychrome RGB Not working. Flick through this in-depth guide on polychrome RGB sync troubleshooting and pinpointing. Adjust Colors, effects, styles, and patterns using ASRock Polychrome sync and enhance your gaming ambient.

Well, you are not the only one! Most people are facing problems regarding running and controlling ASRock Polychrome Sync. Syncing the effects, Access Violation at Address, Not detecting the RGB sync, Not being able to change the RGB dynamic modes are some basic errors people face while using ASRock Polychrome sync motherboard. Sometimes even the peripheral components also don’t work.

If you are looking to fix the errors, then hey it is the heaven-sent place. We understand that our battle heroes need a perfect battle environment to grasp the win.

Why is ASRock Polychrome RGB Not Working?

ASRock Polychrome Sync software is fabricated with creativity, consideration, and cost-effectiveness just as ASRock says. Polychrome sync controls and synchronizes the whole lighting system.

But sometimes it shows errors based on different situations. There are some major reasons behind it. ASRock Polychrome Sync Software or ASRock RGB Utility doesn’t work if the motherboard isn’t compatible. ASRRGBLED will never work on any other motherboards except ASRock.

Because of the discordant among RGB components, they show various errors. There are different types of messages which pop up when the system can’t sync with the RGB LED sync software of ASRock’s. These error messages vary from one another by the reasons causing the errors.

Here are the errors faced by most people:

• Sometimes the system shows the error message This MCU is empty. Please restart this utility. while starting.
• In some cases, it freezes the whole system and the system stops working at all.
• And most of the occasion there’s a common message while running the app is This Utility is not for this platform.
• Error 0xfffb where it shows No ASR graphics card and ASR USB Header found.
• Access denied or Access violation at ASRock address in module.

Exhausted of facing these errors? Don’t brood. We are here to resolve your every issue regarding ASRRGBLED. Just keep reading this guide.

Sometimes these errors are caused by human error, sometimes it’s machine error and most of the time it’s a software program error. By human error I mean not connecting the RGB headers properly to the motherboard. Make sure to connect an RGB component to the 4-pin RGB header of the motherboard and connect Addressable RGB components to the 3-pin ARGB header of the motherboard. Again Machine defects are a common thing. If your motherboard Lighting doesn’t work at all it’s a faulty product. be sure to claim your RMA before it expires.

Lastly, let’s talk about the software error. The software is often have bugs and sometimes they are blocked by firewall and so many other interfering programs. And this needs to be taken seriously as most of the people face the software related problem. Don’t worry I have provided here and easy solution that will fix the ASRock Polychrome sync issues of any motherboard. Also read similar troubleshooting guide like, how to fix RGB Fusion 2.0 not working

How to Fix ASRock Polychrome RGB Not Working

To fix this ASRock utility error, you have to first uninstall polychrome sync and then download Polychrome RGB Sync latest version.

Here are the steps to fix ASRock Polychrome RGB not working:

1. Install the ASRock Polychrome Sync software in default settings.
2. Press Windows+R to open the Run.
3. Type cmd and hit OK.
4. Write the command: cd C:Program Files (x86)ASRock UtilityASRRGBLEDBin and hit enter
5. Run the following commands in the same way:
   C:Windowssystem32>wICPFLASH.exe /File=nu51_1.08
   C:Windowssystem32>wICPFLASH.exe /File=nu51_1.10
   C:Windowssystem32>wICPFLASHADSBv2.exe /File-nu51_2.06
   C:Windowssystem32>wICPFLASHADSB.exe /File=nu51_2.07
6. Close the Command Promt.
7. Press Ctrl+Shift+Esc to open Task manager.
8. Go to Startup tab and enable polychrome sync and disable all the other RGB utility apps.
9. Run ASRock Polychrome RGB software as an administrator.

And mission accomplished! you have fixed Polychrome RGB Sync Not working.

Fix ASRock Polychrome Sync not detecting devices

Errors vary with your RGB component peripherals and software. Most of the time, it’s because your devices are not compatible with ASRRGBLED sync. So, at first, make sure if the hardwires you use are congruent.

If it still shows any error, then follow these easy steps and solve your issue within a couple of minutes. ASRock Support Team recommends this guidance:

1. Uninstall your current ASRock Polychrome Utility from the control panel.
2. Go to C:Program Files (x86) and delete the File named ASRock Utility.
3. Download the latest version of ASRock Polychrome RGB Sync software.
4. Install it and then restart your PC.
5. Run Polychrome RGB software as an administrator
6. Go to C:Program Files (x86)ASRock UtilityASRRGBLEDBin
7. Click WriteFW.BAT to flash the firmware.

And you have solved the problem of Polychrome RGB software not detecting devices.

Also, you can try running the ASRock RGB polychrome as a windows administrator. Go to task manager to find an application on ASRock polychrome sync.

But again, never forget to make sure if your PC components and software are compatible enough to sync properly. There’s a simple way to detect this error. While running the application, if your system shows the message This utility is not for this platform, then your devices are not compatible. Nothing but updating or changing your motherboard will fix the problem.

Fix asrock polychrome error 0xfffc

You may have seen ASRock RGB led access violation error message on your PC saying error 0xfffc this utility is not for this platform. This error is shown mostly when you are using a motherboard that is not compatible with this Asrock motherboard utility. Motherboards by other manufacturers like Gigabyte, Asus, MSI don’t support asrrgbled app. Also, there are some old motherboards that do not support this utility too. So, you need a Polychrome Sync compatible motherboard to avoid this access violation at address ASRock error.

Fix Error 0xFFF0 This MCU is empty

MCU is a part of your motherboard that takes input from polychrome sync and controls the motherboard’s lighting. When you see an error message saying this MCU is empty please restart this utility, your motherboard’s MCU gets empty of instruction sets. But that isn’t a major problem. You can flash the MCU instruction memory by copy-pasting a few lines in your Command prompt.

To fix 0xFFF0 This MCU is empty you will have to open the windows command prompt by pressing Windows+R then paste cmd in the writing field and hit Enter. Now type the command:

CD C:Program Files (x86)ASRock UtilityASRRGBLEDBin

Again type WriteFW.bat and hit Enter. And your MCU instruction sets will reset.

Fix Error 0xFFFB of Polychrome Sync RGB

The error 0xFFFB shows the message there is no asr graphics card and asr USB led header. This error is shown when your graphics card isn’t compatible with Polychrome Sync or your motherboard’s USB LED header is damaged/disconnected.

To fix this issue you can reconnect your USB head for the LED strips and RGB headers And use a compatible GPU. If you already have a GPU that’s not compatible then simply reinstall ASRock motherboard utility and your problem will be solved.

How to Change Color in ASRock Polychrome RGB

Is your job done after fixing the asrrgbled not working errors? NO! from there, your creativity starts. The whole point of fixing the issues was to make your gaming experience more enthralling.

So, to create the hypnotic virtual effect and blow away your mind with super RGB lighting, you need to know how to set up or change the RGB in ASRock polychrome sync.

Here’s how to change color in ASRock Polychrome RGB:

1. Select your preferred peripheral to change the RGB LED settings.
2. Select the specific RGB component.
3. Drag the selected tab on the color wheel so that you can change the hue and saturation accordingly to your choice. You can drag the tab on the RGB sliders to change the individual RGB values instead. To enable or disable the LED, click the toggle switch on the bottom right.
4. Use drop-down menus to change the settings of lighting styles and effects.
5. Change the LED speed by sliding the speed radio button left and right.
6. Click apply to save the settings after customizing your RGB LED settings in ASRock Polychrome Sync.

Download ASRock Polychrome Sync and don’t forget to share your insights. You can get ASRock polychrome RGB download link here.

Frequently Asked Questions

What is ASRock Polychrome Sync?

ASRock Polychrome Sync is a utility facility that allows you to control your RGB components.

What is RGB sync?

RGB sync is a free piece of software that detects all your RGB components by itself.

Will ASRRGBLED sync run on other motherboards?

ASRRGBLED sync won’t runs on any motherboard except the ASRock motherboards. It’s not compatible with others,

What to do when it shows Access denied after the command for Polychrome RGB?

Run the Polychrome RGB utility sync command app as the administrator and it will grant you all the permissions.

Which RGB Sync software does ASRock use?

ASRock uses the Polychrome sync and the Razer Chroma as RGB syncing software. They provide the best lighting experience with action and event-based LED lighting.

Conclusion

ASRock is one of the most renowned hardware brands in the world. They are ruling the countries since 2002. Now they are working on the software. ASRock Polychrome Sync is one of their vastly hit creation; another pearl from their tech-ocean.

But an enormous amount of people faced some errors and issues while using the application. They were unable to control the RGB LED light settings. Some of the users faced system crashes during their use. On the other hand, few peoples’ systems got frozen. Quite a few customers stumbled after getting the message ‘access denied’. But thank god we found error fixing for this Polychrome sync. What a relief for all the tech-savvies out there!

As ASRock Polychrome Access Violation is no longer valid with our assistance, download ASRock Polychrome Sync to enjoy the unique and aesthetic features of ASRRGBLED sync.

Источник

ASRock Polychrome RGB Not Working – Ultimate Fix Guide

The ASRock Polychrome RGB is a beautiful utility that gives you complete control over the RGB components of your PC if they are compatible with it. However, life becomes difficult when you start facing issues while using the applications, which does not allow you to take full benefit from your RGB components.

If you have made your way to this page because you are facing issues with the ASRock Polychrome RGB, do not worry, as you aren’t the first one here. Lots of users complain about issues with the Software and face various problems in Syncing effects, Not Detecting RGB Sync, Access Violation at Address, and more which are some fundamental errors.

Although these errors might be frustrating, there’s no need to panic as we have got you covered with some definitive and straightforward fixes that will get you rolling. Also check How To Download And Use ASRock Polychrome RGB Sync.

ASRock Polychrome RGB – What Is It?

The ASRock Polychrome RGB is a software that gives you complete control over your RGB illuminations, allowing you to customize and sync the RGB components to your liking. The Software is straightforward to use and provides a user-friendly environment.

This Software syncs your motherboard with all the PC components such as RGB PC case, CPU cooler, CPU Fans, RGB keyboards, and so much more, allowing you to customize the illumination effects to your own liking from a wide range of possibilities. You also get to choose super cool lighting effects like Water, Rainbow, Cycling, Strobe, Cram, and many more, consisting of 15 effects.

Your RGB devices can also be synced with Polychrome RGB-certified Accessories. This will allow you to take your gaming experience to a whole different level, providing astonishing performance and exceptional aesthetics lighting up your PC brilliantly.

Reasons Why ASRock Polychrome RGB Is Not Working

As ASRock states it, the ASRock Polychrome Sync is manufactured with creativity, consideration, and cost-effectiveness. This is a great application that gives you total control over your RGB lighting. But not everything is perfect. Users have reported many issues with the ASRock Polychrome RGB, and there are some reasons that cause those issues and must be addressed.

The ASRock Polychrome RGB software will never work if you are using any other motherboard besides ASRock. Before you do anything, you must make sure all your RGB components are compatible, as incompatibility is one of the most common reasons people face issues. This renders your RGB lightings useless.

The following are some of the most commonly faced errors reported by users:

1. At times, a common message will appear showing This Utility Is Not For This Platform.
2. The system might show the error message This MCU is empty. Please restart the utility while starting.
3. You might face Error 0xfffb, which indicates no ASR graphic card and ASR USB Header is detected.
4. Most users commonly face Access Denied or Access Violation at address.
5. Sometimes, the Software freezes your system and causes it to stop working.

The errors may be caused due to various reasons. At times it might be a human error that might be caused simply by improperly connecting the RGB headers. There might also be an error due to a Machine defect caused by a faulty product.

Another reason for issues might be faulted in the Software. For example, Software might have bugs or clash with other programs, which cause different problems. However, the most common issues faced by users are usually Software related.

Don’t you worry, as we have prepared different definitive fixes that will get you rolling again.

Why Do I Keep Witnessing Access Violation At Address 000000FF. Read of address 000000FF

The access violation message alerts you that the ASRock Polychrome Sync software is unable to link up with the RGB control center of your motherboard. Though the ASRock Polychrome RGB is a great application, sometimes users do face these errors, which might be caused by improper implementation of the RGB control center.

Additionally, components that are incompatible with each other are in no way going to function. Therefore, make sure your hardware is compatible.

Steps To Perform Before You Start Fixing ASRock Polychrome RGB

Before you proceed to directly fix the ASRock Polychrome RGB software, you should take care of the following steps first.

1. You must install the latest version of the ASRock Polychrome RGB from the official website.
2. Check whether your motherboard along with all the other components, are compatible with Polychrome Sync or not.
3. Plug the RGB Headers correctly into your motherboard.
4. If you have any other RGB software installed, make sure you uninstall it to avoid clashes.
5. Make sure the PSU you are using is good enough to light your RGBs

Fixing ASRock Polychrome RGB Motherboard Errors

Now that we have everything in place, we proceed on to fix the ASRock Polychrome RGB not working.

Follow the steps below, and you’ll be all set in no time:

1. But, first, download and Install the ASRock Polychrome RGB application with default settings.
2. To open the Run, press Windows + R.
3. In the Run, type cmd and click on OK.
4. Write the following command in the Command Prompt Window and then hit enter: cd C:Program Files (x86)ASRock UtilityASRRGBLEDBin.
5. In the same way, run all the following commands:

C:Windowssystem32>wICPFLASH.exe /File=nu51_1.08

C:Windowssystem32>wICPFLASH.exe /File=nu51_1.10

C:Windowssystem32>wICPFLASHADSBv2.exe /File-nu51_2.06

C:Windowssystem32>wICPFLASHADSB.exe /File=nu51_2.07

• You can now close the Command Prompt.
• Click on Ctrl + Shift + Esc, which will launch the Task Manager.
• Find your way to the Startup Tab and Enable Polychrome Sync while disabling all other RGB applications.
• Now go on and run ASRock Polychrome RGB as an administrator.

And there you have it. So that’s how you fix ASRock Polychrome RGB not working.

Fix For ASRock Polychrome RGB Not Detecting Devices

Errors like this one are usually caused if your RGB components are not connected properly. They might also because if your RGB devices are not compatible with the ASRock Polychrome RGB. So, first of all, make sure everything is connected in place, and all the hardware is compatible.

If the error persists, follow the steps below to quickly fix this issue:

1. Launch the control panel and uninstall the ASRock Polychrome RGB utility first.
2. Find your way to C:Program Files (x86). Now delete the ASRock Utility file.
3. From the official website, download the most updated version of the ASRock Polychrome RGB software. Complete the installation process and then restart your PC.
4. Now run ASRock Polychrome RGB as the Administrator.
5. Make your way to C:Program Files (x86)ASRock UtilityASRRGBLEDBin.
6. To flash the firmware, click WriteFW.BAT.

And that’s how you get the job done. The issue of ASRock Polychrome RGB not detecting devices should be fixed now. But above everything, you must make sure all your PC components are compatible with the Software, and everything is in place. That’s the most crucial thing to consider.

Changing Color in ASRock Polychrome RGB

Now that we have dealt with all the errors and got out of that mess, we can now move on to enhancing your gaming experience by changing colors in the ASRock Polychrome RGB software. This will allow you to create mind-blowing effects that will take your aesthetics and experience to a whole new level.

The following steps show how to change colors in ASRock Polychrome RGB:

1. First, select the peripheral you prefer to change the RGB settings.
2. Now you must select the specific RGB component.
3. You can change the saturation and hue according to your preference by dragging on the color wheel. You can also change the specific RGB values by dragging on the RGB sliders.
4. The toggle switch present at the bottom right will allow you to enable or disable LEDs.
5. You can alter the lighting styles and effects using the dropdown menu.
6. The LED speeds can be changed by moving the speed ratio button to the left or right.
7. After completing your customization, you can click apply and save the settings you have changed.

How To Reset My ASRock RGB?

You can easily reset the Polychrome Sync settings by erasing the data from C:Program Files (x86)ASRock UtilityASRRGBLEDConf.

Why is my Polychrome Sync not detecting any device/motherboard?

The polychrome might not detect the device if it’s incompatible with it. Also, it might require a flash to the motherboard RGB Module manually.

Does ASRock support RGB?

Yes, ASRock does support RGB. It has a wide range of RGB compatible products.

What is ASRock utility?

The ASRock utility or ASRock Polychrome Sync is a software designed to give you complete control over your RGB components.

Wrapping It Up

ASRock is one of the world’s most popular hardware manufacturers and is famous for its RGB components. And to control the RGB components, ASRock has designed its own utility software making life easy. However, users face some issues frequently, which ASRock will try to address. But until then, we can count on some fixes to keep us going.

This comprehensive guide has walked you through everything you need to know if you plan on fixing an issue with the Software. We stated the possible reasons for those issues along with the definitive fixes that will get you going. Make sure you follow through with the steps carefully for the fixes to work correctly.

We hope this guide would have solved all your problems, and you’ll be able to use the ASRock utility without any hurdles.

Источник

The ASRock Polychrome RGB is a beautiful utility that gives you complete control over the RGB components of your PC if they are compatible with it. However, life becomes difficult when you start facing issues while using the applications, which does not allow you to take full benefit from your RGB components.

If you have made your way to this page because you are facing issues with the ASRock Polychrome RGB, do not worry, as you aren’t the first one here. Lots of users complain about issues with the Software and face various problems in Syncing effects, Not Detecting RGB Sync, Access Violation at Address, and more which are some fundamental errors.

Although these errors might be frustrating, there’s no need to panic as we have got you covered with some definitive and straightforward fixes that will get you rolling. Also check How To Download And Use ASRock Polychrome RGB Sync.

So let’s begin.

ASRock Polychrome RGB – What Is It?

The ASRock Polychrome RGB is a software that gives you complete control over your RGB illuminations, allowing you to customize and sync the RGB components to your liking. The Software is straightforward to use and provides a user-friendly environment.

This Software syncs your motherboard with all the PC components such as RGB PC case, CPU cooler, CPU Fans, RGB keyboards, and so much more, allowing you to customize the illumination effects to your own liking from a wide range of possibilities. You also get to choose super cool lighting effects like Water, Rainbow, Cycling, Strobe, Cram, and many more, consisting of 15 effects.

Your RGB devices can also be synced with Polychrome RGB-certified Accessories. This will allow you to take your gaming experience to a whole different level, providing astonishing performance and exceptional aesthetics lighting up your PC brilliantly.

Reasons Why ASRock Polychrome RGB Is Not Working

As ASRock states it, the ASRock Polychrome Sync is manufactured with creativity, consideration, and cost-effectiveness. This is a great application that gives you total control over your RGB lighting. But not everything is perfect. Users have reported many issues with the ASRock Polychrome RGB, and there are some reasons that cause those issues and must be addressed.

The ASRock Polychrome RGB software will never work if you are using any other motherboard besides ASRock. Before you do anything, you must make sure all your RGB components are compatible, as incompatibility is one of the most common reasons people face issues. This renders your RGB lightings useless.

The following are some of the most commonly faced errors reported by users:

1. At times, a common message will appear showing This Utility Is Not For This Platform.
2. The system might show the error message This MCU is empty. Please restart the utility while starting.
3. You might face Error 0xfffb, which indicates no ASR graphic card and ASR USB Header is detected.
4. Most users commonly face Access Denied or Access Violation at address.
5. Sometimes, the Software freezes your system and causes it to stop working.

The errors may be caused due to various reasons. At times it might be a human error that might be caused simply by improperly connecting the RGB headers. There might also be an error due to a Machine defect caused by a faulty product.

Another reason for issues might be faulted in the Software. For example, Software might have bugs or clash with other programs, which cause different problems. However, the most common issues faced by users are usually Software related.

Don’t you worry, as we have prepared different definitive fixes that will get you rolling again.

Why Do I Keep Witnessing Access Violation At Address 000000FF. Read of address 000000FF

The access violation message alerts you that the ASRock Polychrome Sync software is unable to link up with the RGB control center of your motherboard. Though the ASRock Polychrome RGB is a great application, sometimes users do face these errors, which might be caused by improper implementation of the RGB control center.

Additionally, components that are incompatible with each other are in no way going to function. Therefore, make sure your hardware is compatible.

Steps To Perform Before You Start Fixing ASRock Polychrome RGB

Before you proceed to directly fix the ASRock Polychrome RGB software, you should take care of the following steps first.

1. You must install the latest version of the ASRock Polychrome RGB from the official website.
2. Check whether your motherboard along with all the other components, are compatible with Polychrome Sync or not.
3. Plug the RGB Headers correctly into your motherboard.
4. If you have any other RGB software installed, make sure you uninstall it to avoid clashes.
5. Make sure the PSU you are using is good enough to light your RGBs

Fixing ASRock Polychrome RGB Motherboard Errors

Now that we have everything in place, we proceed on to fix the ASRock Polychrome RGB not working.

Follow the steps below, and you’ll be all set in no time:

1. But, first, download and Install the ASRock Polychrome RGB application with default settings.
2. To open the Run, press Windows + R.
3. In the Run, type cmd and click on OK.
4. Write the following command in the Command Prompt Window and then hit enter: cd C:Program Files (x86)ASRock UtilityASRRGBLEDBin.
5. In the same way, run all the following commands:

C:Windowssystem32>wICPFLASH.exe /File=nu51_1.08

C:Windowssystem32>wICPFLASH.exe /File=nu51_1.10

C:Windowssystem32>wICPFLASHADSBv2.exe /File-nu51_2.06

C:Windowssystem32>wICPFLASHADSB.exe /File=nu51_2.07

• You can now close the Command Prompt.
• Click on Ctrl + Shift + Esc, which will launch the Task Manager.
• Find your way to the Startup Tab and Enable Polychrome Sync while disabling all other RGB applications.
• Now go on and run ASRock Polychrome RGB as an administrator.

And there you have it. So that’s how you fix ASRock Polychrome RGB not working.

Fix For ASRock Polychrome RGB Not Detecting Devices

Errors like this one are usually caused if your RGB components are not connected properly. They might also because if your RGB devices are not compatible with the ASRock Polychrome RGB. So, first of all, make sure everything is connected in place, and all the hardware is compatible.

If the error persists, follow the steps below to quickly fix this issue:

1. Launch the control panel and uninstall the ASRock Polychrome RGB utility first.
2. Find your way to C:Program Files (x86). Now delete the ASRock Utility file.
3. From the official website, download the most updated version of the ASRock Polychrome RGB software. Complete the installation process and then restart your PC.
4. Now run ASRock Polychrome RGB as the Administrator.
5. Make your way to C:Program Files (x86)ASRock UtilityASRRGBLEDBin.
6. To flash the firmware, click WriteFW.BAT.

And that’s how you get the job done. The issue of ASRock Polychrome RGB not detecting devices should be fixed now. But above everything, you must make sure all your PC components are compatible with the Software, and everything is in place. That’s the most crucial thing to consider.

Changing Color in ASRock Polychrome RGB

Now that we have dealt with all the errors and got out of that mess, we can now move on to enhancing your gaming experience by changing colors in the ASRock Polychrome RGB software. This will allow you to create mind-blowing effects that will take your aesthetics and experience to a whole new level.

The following steps show how to change colors in ASRock Polychrome RGB:

1. First, select the peripheral you prefer to change the RGB settings.
2. Now you must select the specific RGB component.
3. You can change the saturation and hue according to your preference by dragging on the color wheel. You can also change the specific RGB values by dragging on the RGB sliders.
4. The toggle switch present at the bottom right will allow you to enable or disable LEDs.
5. You can alter the lighting styles and effects using the dropdown menu.
6. The LED speeds can be changed by moving the speed ratio button to the left or right.
7. After completing your customization, you can click apply and save the settings you have changed.

How To Reset My ASRock RGB?

You can easily reset the Polychrome Sync settings by erasing the data from C:Program Files (x86)ASRock UtilityASRRGBLEDConf.

FAQs

Why is my Polychrome Sync not detecting any device/motherboard?

The polychrome might not detect the device if it’s incompatible with it. Also, it might require a flash to the motherboard RGB Module manually.

Does ASRock support RGB?

Yes, ASRock does support RGB. It has a wide range of RGB compatible products.

What is ASRock utility?

The ASRock utility or ASRock Polychrome Sync is a software designed to give you complete control over your RGB components.

Wrapping It Up

ASRock is one of the world’s most popular hardware manufacturers and is famous for its RGB components. And to control the RGB components, ASRock has designed its own utility software making life easy. However, users face some issues frequently, which ASRock will try to address. But until then, we can count on some fixes to keep us going.

This comprehensive guide has walked you through everything you need to know if you plan on fixing an issue with the Software. We stated the possible reasons for those issues along with the definitive fixes that will get you going. Make sure you follow through with the steps carefully for the fixes to work correctly.

We hope this guide would have solved all your problems, and you’ll be able to use the ASRock utility without any hurdles.

I’ve been using this board for a little over a week now without problem. But now I get this error…

Imgur

I’ve reinstalled, tried other compatibility modes, and tried running from …Program Files instead, but no luck. Any ideas the cause/fix for this? Not finding much except for stuff from prior 2016.

EDIT: This affects any ASRock program. App Store, Restart to UEFI, A-Tuning, etc.

EDIT 2: FIXED by reflashing BIOS.

EDIT 3: Scratch that. Came back. Was testing with voltages seeing what was polling the CPU preventing core CC6. CyberPower PowerPanel. Only major setting changes were SMT off, and later SVM on for a VM. Dunno.

The ASRock Polychrome RGB is a beautiful utility that gives you complete control over the RGB components of your PC if they are compatible with it. However, life becomes difficult when you start facing issues while using the applications, which does not allow you to take full benefit from your RGB components.

If you have made your way to this page because you are facing issues with the ASRock Polychrome RGB, do not worry, as you aren’t the first one here. Lots of users complain about issues with the Software and face various problems in Syncing effects, Not Detecting RGB Sync, Access Violation at Address, and more which are some fundamental errors.

Although these errors might be frustrating, there’s no need to panic as we have got you covered with some definitive and straightforward fixes that will get you rolling. Also check How To Download And Use ASRock Polychrome RGB Sync.

So let’s begin.

ASRock Polychrome RGB – What Is It?

The ASRock Polychrome RGB is a software that gives you complete control over your RGB illuminations, allowing you to customize and sync the RGB components to your liking. The Software is straightforward to use and provides a user-friendly environment.

This Software syncs your motherboard with all the PC components such as RGB PC case, CPU cooler, CPU Fans, RGB keyboards, and so much more, allowing you to customize the illumination effects to your own liking from a wide range of possibilities. You also get to choose super cool lighting effects like Water, Rainbow, Cycling, Strobe, Cram, and many more, consisting of 15 effects.

Your RGB devices can also be synced with Polychrome RGB-certified Accessories. This will allow you to take your gaming experience to a whole different level, providing astonishing performance and exceptional aesthetics lighting up your PC brilliantly.

Reasons Why ASRock Polychrome RGB Is Not Working

As ASRock states it, the ASRock Polychrome Sync is manufactured with creativity, consideration, and cost-effectiveness. This is a great application that gives you total control over your RGB lighting. But not everything is perfect. Users have reported many issues with the ASRock Polychrome RGB, and there are some reasons that cause those issues and must be addressed.

The ASRock Polychrome RGB software will never work if you are using any other motherboard besides ASRock. Before you do anything, you must make sure all your RGB components are compatible, as incompatibility is one of the most common reasons people face issues. This renders your RGB lightings useless.

The following are some of the most commonly faced errors reported by users:

1. At times, a common message will appear showing This Utility Is Not For This Platform.
2. The system might show the error message This MCU is empty. Please restart the utility while starting.
3. You might face Error 0xfffb, which indicates no ASR graphic card and ASR USB Header is detected.
4. Most users commonly face Access Denied or Access Violation at address.
5. Sometimes, the Software freezes your system and causes it to stop working.

The errors may be caused due to various reasons. At times it might be a human error that might be caused simply by improperly connecting the RGB headers. There might also be an error due to a Machine defect caused by a faulty product.

Another reason for issues might be faulted in the Software. For example, Software might have bugs or clash with other programs, which cause different problems. However, the most common issues faced by users are usually Software related.

Don’t you worry, as we have prepared different definitive fixes that will get you rolling again.

Why Do I Keep Witnessing Access Violation At Address 000000FF. Read of address 000000FF

The access violation message alerts you that the ASRock Polychrome Sync software is unable to link up with the RGB control center of your motherboard. Though the ASRock Polychrome RGB is a great application, sometimes users do face these errors, which might be caused by improper implementation of the RGB control center.

Additionally, components that are incompatible with each other are in no way going to function. Therefore, make sure your hardware is compatible.

Steps To Perform Before You Start Fixing ASRock Polychrome RGB

Before you proceed to directly fix the ASRock Polychrome RGB software, you should take care of the following steps first.

1. You must install the latest version of the ASRock Polychrome RGB from the official website.
2. Check whether your motherboard along with all the other components, are compatible with Polychrome Sync or not.
3. Plug the RGB Headers correctly into your motherboard.
4. If you have any other RGB software installed, make sure you uninstall it to avoid clashes.
5. Make sure the PSU you are using is good enough to light your RGBs

Fixing ASRock Polychrome RGB Motherboard Errors

Now that we have everything in place, we proceed on to fix the ASRock Polychrome RGB not working.

Follow the steps below, and you’ll be all set in no time:

1. But, first, download and Install the ASRock Polychrome RGB application with default settings.
2. To open the Run, press Windows + R.
3. In the Run, type cmd and click on OK.
4. Write the following command in the Command Prompt Window and then hit enter: cd C:Program Files (x86)ASRock UtilityASRRGBLEDBin.
5. In the same way, run all the following commands:

C:Windowssystem32>wICPFLASH.exe /File=nu51_1.08

C:Windowssystem32>wICPFLASH.exe /File=nu51_1.10

C:Windowssystem32>wICPFLASHADSBv2.exe /File-nu51_2.06

C:Windowssystem32>wICPFLASHADSB.exe /File=nu51_2.07

• You can now close the Command Prompt.
• Click on Ctrl + Shift + Esc, which will launch the Task Manager.
• Find your way to the Startup Tab and Enable Polychrome Sync while disabling all other RGB applications.
• Now go on and run ASRock Polychrome RGB as an administrator.

And there you have it. So that’s how you fix ASRock Polychrome RGB not working.

Fix For ASRock Polychrome RGB Not Detecting Devices

Errors like this one are usually caused if your RGB components are not connected properly. They might also because if your RGB devices are not compatible with the ASRock Polychrome RGB. So, first of all, make sure everything is connected in place, and all the hardware is compatible.

If the error persists, follow the steps below to quickly fix this issue:

1. Launch the control panel and uninstall the ASRock Polychrome RGB utility first.
2. Find your way to C:Program Files (x86). Now delete the ASRock Utility file.
3. From the official website, download the most updated version of the ASRock Polychrome RGB software. Complete the installation process and then restart your PC.
4. Now run ASRock Polychrome RGB as the Administrator.
5. Make your way to C:Program Files (x86)ASRock UtilityASRRGBLEDBin.
6. To flash the firmware, click WriteFW.BAT.

And that’s how you get the job done. The issue of ASRock Polychrome RGB not detecting devices should be fixed now. But above everything, you must make sure all your PC components are compatible with the Software, and everything is in place. That’s the most crucial thing to consider.

Changing Color in ASRock Polychrome RGB

Now that we have dealt with all the errors and got out of that mess, we can now move on to enhancing your gaming experience by changing colors in the ASRock Polychrome RGB software. This will allow you to create mind-blowing effects that will take your aesthetics and experience to a whole new level.

The following steps show how to change colors in ASRock Polychrome RGB:

1. First, select the peripheral you prefer to change the RGB settings.
2. Now you must select the specific RGB component.
3. You can change the saturation and hue according to your preference by dragging on the color wheel. You can also change the specific RGB values by dragging on the RGB sliders.
4. The toggle switch present at the bottom right will allow you to enable or disable LEDs.
5. You can alter the lighting styles and effects using the dropdown menu.
6. The LED speeds can be changed by moving the speed ratio button to the left or right.
7. After completing your customization, you can click apply and save the settings you have changed.

How To Reset My ASRock RGB?

You can easily reset the Polychrome Sync settings by erasing the data from C:Program Files (x86)ASRock UtilityASRRGBLEDConf.

FAQs

Why is my Polychrome Sync not detecting any device/motherboard?

The polychrome might not detect the device if it’s incompatible with it. Also, it might require a flash to the motherboard RGB Module manually.

Does ASRock support RGB?

Yes, ASRock does support RGB. It has a wide range of RGB compatible products.

What is ASRock utility?

The ASRock utility or ASRock Polychrome Sync is a software designed to give you complete control over your RGB components.

Wrapping It Up

ASRock is one of the world’s most popular hardware manufacturers and is famous for its RGB components. And to control the RGB components, ASRock has designed its own utility software making life easy. However, users face some issues frequently, which ASRock will try to address. But until then, we can count on some fixes to keep us going.

This comprehensive guide has walked you through everything you need to know if you plan on fixing an issue with the Software. We stated the possible reasons for those issues along with the definitive fixes that will get you going. Make sure you follow through with the steps carefully for the fixes to work correctly.

We hope this guide would have solved all your problems, and you’ll be able to use the ASRock utility without any hurdles.