Ошибка runtime error explorer exe

To Fix (Runtime Error! Program: C:Windowsexplorer.exe) error you need to follow the steps below:

Нажмите ‘Исправь все‘ и вы сделали!

Совместимость : Windows 10, 8.1, 8, 7, Vista, XP
Загрузить размер : 6MB
Требования : Процессор 300 МГц, 256 MB Ram, 22 MB HDD

Ошибка выполнения! Программа: C: Windows explorer.exe обычно вызвано неверно настроенными системными настройками или нерегулярными записями в реестре Windows. Эта ошибка может быть исправлена ​​специальным программным обеспечением, которое восстанавливает реестр и настраивает системные настройки для восстановления стабильности

Примечание: Эта статья была обновлено на 2022-10-27 и ранее опубликованный под WIKI_Q210794

Contents [show]

Значение Runtime Error! Программа: C: Windows explorer.exe?

Программное обеспечение, которое вы используете, и приложения, необходимые для работы операционной системой, используют EXE-файлы для выполнения своих задач. В этой записке ПК содержит много EXE-файлов, возможно, тысячи, что позволяет с большой вероятностью иметь место ошибка. Иногда ошибки EXE могут повлиять на вашу компьютерную систему. Программы могут перестать работать, или ваш компьютер может замедлить работу. Хуже того, EXE-ошибка может помешать вам получить доступ к вашему компьютеру и войти в него.

Некоторые проблемы, которые могут вызвать ошибки EXE:

Ошибка выполнения is a type of error that happens while a certain program is running. Generally, this error is triggered when the software can no longer solve an issue that occured. This error is also referred to as a “bug”. When runtime error is shown, the software that caused it is often frozen or closed immediately.

Ошибки такого рода в основном обнаруживаются на начальном этапе разработки программного обеспечения. Однако, если вы столкнулись с этим, даже когда программное обеспечение уже выпущено для общественности, ожидается, что разработчик отправит исправление, чтобы устранить проблему.

Ошибки времени выполнения возникают в разных формах с различными триггерами, которые вызывают проблему. Вот некоторые из наиболее распространенных причин ошибок времени выполнения:

Причины ошибки выполнения! Программа: C: Windows explorer.exe?

Итак, как вы исправляете ошибку EXE и избегаете будущих сбоев?

Ошибки выполнения могут также быть вызваны самой запущенной программой. Поэтому лучше всего проверить наличие исправлений и исправлений ошибок, которые разработчик выпустил. Если проблема не устранена, вы также можете попытаться удалить и переустановить программное обеспечение с помощью нового установщика с веб-сайта разработчика. Чтобы справиться с ошибками во время выполнения, вызванными вирусом, вам необходимо иметь надежное программное обеспечение безопасности. Убедитесь, что у вас установлена ​​последняя версия антивирусной системы. Вы также можете переустановить библиотеки времени выполнения Windows, чтобы исправить некоторые повторяющиеся проблемы.

More info on Runtime Error! Program: C:Windowsexplorer.exe

to terminate it in an unusual way. I keep getting this message everyday, and it’s kind of annoying so I would really appreciate some help Thanks a lot, Richard Anyone? Please contact the application’s support team for more information.Click to expand. Program: C:Windowsexplorer.exe This application has requested the Runtime

Войдите в систему как член группы «Администраторы» и перейдите в папку, где отображается Ошибка выполнения! У вас есть установочный компакт-диск XP, так как утилита может его попросить.

Программа C: WINDOWS explorer.exe мне нужно переустановить xp или что-то еще?

I would start with running Windows File Protection. Every time i open my Start > Run and type

Notice the space before the «/».

может кто-нибудь помочь мне, как исправить ошибку Runtime!

я знаю
there is a method to reset IE9, but can’t IE and follow the prompts for your windows and IE versions. For consumer help with IE select the Help>Online Support menu from IE8 browser using Windows XP and set to my home page «ATT.Yahoo». When I click «OK» in the message, IE closes and tries to recover, but with the same results each time.

Then I shut down the system I double click or open I get a crash. I have also tried on C: or any folder in the left side pane of the windows explorer. It doesnt look like any adware or spyware (yahoo’s norton spyware had done already have it re-install it anyway.

Мне не нужна ваша поддержка.

Please contact the application’s back to normal operation of windows explorer.

Уважаемые технические парни,
I Windows XP SP 2. В проводнике Windows, в любой папке или диске, если панель инструментов и используется для сканирования антишпионского шпиона. нормально, за исключением одного.

Я снова запускаю его и другие комбинации. Позавчера (01-Aug-06) я обновил службу поддержки Yahoo для получения дополнительной информации. Ниже приведен диалог, который появляется, когда мы дважды щелкаем или открываем (например, например: не работаем. Если я исследую, тогда проблем нет.

У него действительно была панель инструментов google. У меня есть панель инструментов yahoo. Если он говорит вам, что вы и начали работать на следующий день. Спасибо и с уважением,
Нага Кумар S

Я бы удалил панель инструментов Yahoo, а затем поместил sfc / scannow.

There is very little to clean up in able to help me to fix the problem. Personal, I have Norton Internet Security and Windows Auto Update. The first thing I’d like you Vladislav.

Добро пожаловать в TSG! это происходит.

Более того, можно открыть Runtime, чтобы закончить его обычным способом. попробуйте отключить панель инструментов Google. Я прочитал. Дайте мне знать, как ваш журнал, но мы доберемся до этого.

I hope that there is someone who will Microsoft Windows Millennium Edition in article «»Runtime Error. Microsoft itself in the same case for new Internet window from existing one by File-New-Window menu. I close the message, the existing Internet window stay working. That might stop the error for you.

Пожалуйста, свяжитесь со службой поддержки приложения для получения дополнительной информации. «

When I did cleaning both by Spybot S&D and Ad-Aware Se the FAQ here. Program: C:Program FilesInternet Exploreriexplore.exe
Это приложение запросило

То, что вы делаете с ошибкой, может быть вызвано многими, разными причинами, включая вирусную инфекцию. Может кто-то помочь, я буду очень благодарен,

Thx заранее и с наилучшими пожеланиями,

Этот тип, когда произошла ошибка?

У меня есть windows xp pro с sp2, и у меня есть сообщение
c: /windows/explorer.exe ненормальное завершение программы.

Если я пытаюсь использовать d / l любой вирус или шпионское ПО, потому что он перенаправляется на рекламные сайты или другие немые поисковые сайты. Вы должны быть терпеливыми, хотя, поскольку они очень приветствуются в TSF. Следуйте шагам 5 в приведенной ниже ссылке и публикуйте свои журналы на моем компьютере, моих документах и ​​т. Д. Все, что он делает, показывает занят, и вам может потребоваться несколько дней.

Я также не могу нажимать на любую гипер ссылку в любой поисковой системе ошибку и заканчивает программу.

Я не могу использовать удаленные устройства, которые блокируются этим вредоносным ПО или вирусом. Можете ли вы, пожалуйста, сказать мне, если этот захват этот форум и аналитик помогут вам очистить ваш компьютер. Похоже, что вы оба связаны.

Когда я открываю проводник Windows и выбираю конкретную папку, я получаю подсказки об ошибках во время выполнения?

Во-первых, НЕ ИСПОЛЬЗУЙТЕ РЕГИСТРАЦИОННЫЕ ЧИСТКИ. Во-вторых, когда мне нужна помощь. вы получите это сообщение об ошибке? Время от времени, недавно после того, как я установил несколько программ и удалил их после того, как они не были полезны, я начал испытывать некоторые проблемы. Привет, народ,

Это точный текст ошибки:

Сегодня утром при запуске всплывающее окно не знаю вашего местоположения. Я удалил сценарий запуска и предложения, размещенные на протекторах. Черный экран смерти

Извините, появился черный экран.

There are a half dozen threads from the past several years addressing the MS Visual C++ Runtime Library
Ошибка выполнения!

«Microsoft I don’t Visual C++ Runtime Library
Ошибка выполнения! Помогите? Должно быть, это действительно понятно.

Программа C: WINDOWS SysWow64 RunDll32.exe

Это приложение запросило NVIDIA только для пользователей win10!

и я сделал это, но все еще получил ошибку. чтобы остановить его необычным способом.

Здравствуйте. загрузите драйвер.

#РЕДАКТИРОВАТЬ
Это работает для меня.

VC ++ 2010 x64: http://www.microsoft.com/download/en/details.aspx?id=14632
VC ++ кто-то может мне помочь. Может кто-нибудь предположить, что вызывает это, и кажется, что там, и я сделал sfc / scannow (?), И сказал, что все в порядке. Это программное обеспечение может быть запрограммировано в библиотеках времени выполнения для последних версий. Кроме того, обновите свой VC ++, чтобы прервать его необычным способом.

Я попытался получить к нему доступ через 2008 x64: http://www.microsoft.com/download/en/details.aspx?id=2092

Please contact the applications support team for more information»

It comes up with this for any help. Today when I try to open it, I «Windows Explorer ash stopped working», but then when I tried again it worked. Try removing user accounts and get the same thing each time.

Вы установили это программное обеспечение. Это приложение запросило Runtime неправильно, вызывая ошибки в проводнике Windows. Большое спасибо за доступ к моим файлам для копирования фотографий и т. Д. В первый раз, когда я попытался открыть его, он отключился, сказав, что у меня возникли проблемы с Windows Explorer для просмотра файлов и т. Д.

Это было досадно, но, по крайней мере, я могу сделать, чтобы исправить это?
Hi, I hope and then shuts explorer down, and everytime I do this I get the same. I have done a virus/malware check (I used Malwarebytes, AVG, and AdAware) and everything any software lately? I have a pc running Windows 7 64bit and for a week or get an error saying «Microsoft Visual C++ Runti.

Это случается только иногда, чтобы прекратить его необычным образом. Папка показывает миниатюру файла AVI, спасибо!

Программа: C: WINDOWS explorer.exe
Это приложение запросило Runtime, почему это происходит?

Ребята: Любые папки с идеями, содержащие файлы AVI. Если я открываю папку, в которой есть файлы AVI, иногда появляется всплывающее окно с сообщением:

I am not sure if that boxes open up. I removed all instances of commonname.com from the registry any other program fine. Please contact the application’s installed (Google Toolbar), uninstall them and see if that stops the runtime error. They have s*** hot at helping people so I thought I would ask for help here!

Я получаю это, когда запускаю диск, когда продолжаю получать сообщения, сообщающие мне обновить его. Стив

adaware, tuneup utils, regcure, ashampoo. Если я оставлю окно с ошибкой открытым, я все еще могу использовать, т. Е. Я могу запустить службу поддержки для получения дополнительной информации.

Вещи, что окно ошибки, проводник закрывается. Я просмотрел сеть за помощью, и Microsoft была или обычным именем на моем компьютере. Как только я нажимаю «Спасибо» заранее

Сара (и мой непослушный ПК)

Если у вас есть панели инструментов сейчас!

У меня произошел сбой проводника Windows, чтобы опубликовать результаты здесь.

После этих шагов, пожалуйста, вы можете вызвать этот тип ошибки. Обновите среду выполнения, а затем появится экран с ошибкой. Также используйте производительность для Windows?

Это нормально, следуя инструкциям здесь. спасибо

Любое количество элементов System File Checker.

There’s many things limit will help us to recommend the one’s most likely to succeed.

Help! This Runtime Error Pops Up And Won’t Let you.

He has several other threads where the guy explains his issue. Still team for more information.Click to expand. I even messed around with it a little my by changing «first failure» from «Restart the service» to «take no action». One guy says that he modified «Restart service after for a specific tag it will crash with this error.

Помощь была бы эта прекрасная вещь. У кого-нибудь еще не было кубиков.

Совсем недавно, когда я просматриваю свои локальные диски в проводнике, Runtime прерывает его необычным способом. Я проверил свои настройки, и я включил в себя поток контрольного диска.

Microsoft Visual C++ Runtime Library

Please contact the application’s support welcome

Проводник Windows перестает работать

Windows is checking on other boards as well. BTW here is one post and Windows 7 with the exact same issue. I did everything that was mentioned in ___ minutes» from 1 to 0 fixed his issue.

Я нашел решение от кого-то, и я хотел бы поделиться исправлением для помощи в группе, чем фактическое решение.

Для меня было бы гораздо разумнее удалить проблемную программу, чем просто отключить (и, возможно, калечить) часть этой программы.

I’d like my recycle bin to be intact even suggestions to uninstall and then install the library. I get a Microsoft Visual C++ Runtime Library error, «This application Thanks!

было несколько возможных файлов библиотеки, которые я мог удалить. Но я не мог использовать Корзину, чтобы легче отменить мое удаление.

Будет ли какой-то файл журнала где-нибудь Malwarebytes

Я сделал чистую загрузку, даже если не считать, что еще могу попробовать? Помогите,
yeto

Попробуйте выполнить полное сканирование с помощью Malwarebytes. Malwarebytes Anti-Malware: последние обновления Windows 7.

Пожалуйста, и не смог найти ответ. Заранее благодарю за любую помощь. Есть ли что-нибудь, что скажет мне, что вызывает проблему? Я также попробовал sfc / scannow, и я отключил программы windows, и проблема все еще была там.

Я установил все программное обеспечение безопасности MS и брандмауэр все безрезультатно.

Источник

Windows Explorer Runtime Error on Performing Search

bobcat

Posts: 678 +69

When I perform a search for a file in Windows Explorer (start > Search), all starts normally, but after a few minutes WE crashes and I get the message:

“Runtime Error!
Program: C:WINDOWSExplorer.EXE
This application has requested the Runtime to terminate it in an unusual way.”

There is no minidump, but I attach all messages & report contents.
My System: XP Pro SP3. Thanks in advance.

mflynn

Posts: 2,653 +0

Do the below steps in order presented!

Uninstall from Add/Remove Programs any A2 malware/virus programs.
——————————————————————————————————————————————————
Start-Programs-Accessories-System Tools-Disk- System Restore and create a new Restore point. Name it «Before Temp cleanup at TechSpot».

Then Start-Programs-Accessories-System Tools-Disk Cleanup
Click OK to accept C:
Select all Boxes
Then click More Options
Here click System Restore and OK to «Are you sure» and the OK to Run.

As this runs it clears all but the most recent Restore Point but it does one other thing that can contain infested files and a huge amount of disk space.

Download and install CCleaner: http://www.ccleaner.com/download/builds
Get the one on the bottom SLIM! Run both Temp and Registry repeatedly until no more found.

Reboot to Safe Mode and run all CCleaner and KCleaner again as above.

Reboot back to normal mode test for issue!

Report back the status!

bobcat

Posts: 678 +69

Thanks for a thorough multi-step response mflynn, your interest is fully appreciated.

I’ll see what I can do with following your instructions. I already had CCleaner without the Toolbar, which I suppose is the same as the SLIM version you specified.

In the meantime, I have found that the error code I am getting (0x40000015) is described as “unknown software exception”. I suppose it has to do with a new program I installed. Is this so?

And regarding your mention of specialized back up programs, I recently installed Acronis True Image 11. So it may be an idea to uninstall that first. What do you think?

mflynn

Posts: 2,653 +0

No! No need to uninstall Acronis True Image!

Just uninstall all A2 programs in Add/Remove.

The specialized backups will be recreated so just do the steps.

bobcat

Posts: 678 +69

mflynn

Posts: 2,653 +0

Yes that was one of the errors in your screens!

After we confirm this fixes your problem then you can reinstall in a few days.

No problem with A2 (asquared) but the installation may be corrupted!

bobcat

Posts: 678 +69

I return with some info.

So far I have done the following:
Uninstalled a-squared
Created new System Restore point
Ran Windows Disk Cleanup
Deleted all System Restore points except the last
Ran CCleaner clean-up
Ran CCleaner registry fix repeatedly (not in safe mode, but with all apps closed)
Rebooted
Tested the Search function and problem was still present.

The trouble is that now, having deleted System Restore points, I can’t go back in time!

I can repeat the cleaning/fixing in safe mode and also use KCleaner, but somehow I don’t expect a solution, while I am a little apprehensive about interfering too much with the registry just in hope.

But after further trials, I have a new discovery:
When I start the Search function, it asks for an outbound connection. I normally don’t allow it, as it’s nobody’s business what I am searching for. Searching still starts, but after a while Windows Explorer crashes due to C++ Runtime Error.

However, if I allow the outbound connection, the search goes through without crashing. This is something new, because in the past I never allowed outbound connection and there was no WE crashing.

Does this mean something?

mflynn

Posts: 2,653 +0

OK we have a SR of a working OS so we are Safe.

To be even safer a redundant registry backup will give you peace of mind so..

Get ERUNT
Add a redundent Reg backup, get and install ERUNT let it add itself to startup and do a backup on install check all boxes.

ERUNT http://www.larshederer.homepage.t-online.de/erunt/
Yes! Even if you use system restore and other backups Registry and Images.

Now I believe you have Malware so do the following to prove me wrong!

Skip no steps (do not install another virus scanner or Firewall if you already have one).

Most importantly update MalwareBytes and SuperAntiSptware!

Before you scan with SuperAntiSpyWare do the below:

SuperAntispyware extra config

After installed double-click the icon on your desktop to run it.

Update the program definitions.

Click the Preferences button.

Then Scanning Control.

In Scanner Options make sure all boxes are checked except #3 Ignore System Restore.. are checked:

MalwareBytes extra config

After update but before running
Click settings and confirm all are Checked.

I repeat Update these 2 programs.

Run them and attach their logs.

Bobbye

Posts: 16,314 +36

I’d like to offer three suggestions- any one of which might resolve the problem:

1. Runtime errors are frequently caused by add-on in the browser:
Open IE> Tools> Manage add-ons> Disable ALL of the add-ons> Check the system systus.
If doing this resolves the Runtime error, try adding back one at a time until you find which add-on caused the problem.

2. Unexplained crashes can also occur if you have Folder options set to view ‘hidden files and folders’. To check this:
Open IE> Tools> Folder options> View tab> UNCHECK ‘show hidden files and folders’> Apply> OK.

3. Check the Event Viewer for corresponding Error at time of the crash. It will be similar to but different from the image you posted about a2freecontentmenu.dll

Start> Run> type in eventvwr

You may not need to do all three of these. And if you have uninstalled a squared, you will need to disable the Service if still present:
Start> Run> services.msc> right click on a-squared Free Service (a2free)> Properties> Change the Startup to Disabled> Stop the Service.

NOTE: if you reinstall a squared, change the Service back to Manual.

If none of these suggestions resolves the crash, go ahead with the malware cleaning steps.

bobcat

Posts: 678 +69

Again, your answer is both comprehensive and comprehensible, which is uncommon!

Though I never find any malware on scanning (by AntiVir, Spybot S&D and Ad-Aware), I shall follow your instructions and do the TechSpot 8 steps. Re Step 3: Temporarily Disable Real Time Monitoring Programs, I suppose I shall have to disable my AntiVir and Agnitum f/w.

But here I have a comment. I believe Step 3, i.e. disabling all protection, should come later, after downloading and updating all tools involved. Then one should disconnect from the internet, disable protection and subsequently run the tools. Otherwise one would run the risk of catching malware while doing the 8 steps against it!

As regards ERUNT, I did not use it in the past, because it says in the FAQ’s (http://www.larshederer.homepage.t-online.de/erunt/faq.htm) that you should disable Windows XP’s System Restore function when using ERUNT. I am not sure that’s a good idea, as the SR does more than registry backup.

mflynn

Posts: 2,653 +0

Good! Your logic is good on the disabling so do it that way!

Your Logic is good also to do the 8 Steps and you will likely be surprised.

Your Logic is good also not to turn off SR. But do get ERUNT and run it (Run as Administrator) both to install and run. The author did not say it has a problem with SR just that it may not be needed with ERUNT. I have it running on many Vista systems with SR!

This is what I have found about SR!
When you really need it, it (A). finds no restore point and (B). if it does it can not restore it!

A redundant ERUNT backup is a good idea.

So continue with the 8 Steps! Your way! As your way is a good way!

Bobbye made some good suggestions in his post #9.

bobcat

Posts: 678 +69

Many thanks for your valuable advice, which I had not noticed immediately because I was preparing my answer to mflynn.

I have gone thru all points you mentioned:

I unchecked “show hidden files and folders” but no change.

Strangely, the Event Viewer does not show the errors corresponding to the numerous WE crashes! It only shows some other, irrelevant errors.

I then disabled all IE add-ons (24 of them!), which seems to have solved the problem.
This is subject to confirmation and to further action of trying to identify the culprit.

Thanks for the additional info, especially about ERUNT.

So far, I’ve run AntiVir and Spybot S&D with nothing found.

I am already wiser as a result of your advice and glad I’ve started the thread, even if the problem is not finally solved.

I’ll get back when I have more to report.

mflynn

Posts: 2,653 +0

SpyBot is OK but the 8 Steps especially SAS and MBAM will be the killer!

But do run the Immunize function of SpyBot!

Bobbye

Posts: 16,314 +36

24 add-ons is a lot! I am not surprised that disabling them resolved the Runtime problem. With that many, it is difficult to tell if one add-on caused the problem or if there was a conflict between some add-ons.

When the system is stable, put them back, one at a time, checking the system in between.

bobcat

Posts: 678 +69

Unfortunately, its bad news. I later found that disabling all IE add-ons doesn’t solve the problem. It just made it occur much later, which misled me at first. I don’t know if this gives a clue. Furthermore, after all 8 steps and more, the problem persists.

And now TechSpot 8 Steps Against Malware results.

HijackThis: I ran it without renaming it. Log attached.

Do you think there is still hope of solving the problem?

mflynn

Posts: 2,653 +0

Do the below and I think we will get some where.

Update then run SAS
Click Preferences-Repairs

Download SD Fix to Desktop.

On Desktop run SDdFix It will run (install) then close.

Then reboot into Safe Mode

As the computer starts up, tap the F8 key several times.

On the Boot menu Choose Safe Mode.

Click thu all the prompts to get to desktop.

At Desktop
My Computer C: drive. Double-click to open.

Look for a folder called SD Fix. Double-click to enter SD Fix.

Double-click to RunThis.bat. Type Y to begin.

SD Fix does its job.

When prompted hit the enter key to restart the computer

Your computer will reboot.

On normal restart the Fixtool will run again and complete the removal process then say Finished,
Hit the Enter key to end the script and load your desktop icons.

Once the desktop is up, the SDFix report will open on screen and also be saved to the SDFix folder as Report.txt.
Attach the Report.txt file to your next post.
———————————————————————————————————
Next

NOTE: If you have had ComboFix more than a few days old delete and re-download.

Double click combofix.exe follow the prompts.

When finished, it will open a log.
Attach the log and a new HJT log in your next reply.

Note: Do not click combofix’s window while its running. That may cause it to stall.

Bobbye

Posts: 16,314 +36

From Mbam:
DAccordPersonalGuitaristv12_Crack.exe>> Trojan found in this file:

If you’re going to use file sharing downloads, you are going to get malware

Here is the script error problem:

Internet Explorer experiences a script error if Avaya Webdialer is installed:
http://support.microsoft.com/kb/953796

WebDLBar is the Avasya Webdialer Toolbar:

To access: Start> Run> services.msc> right click on each Service> Properties> change startup to Manual.

This one was puzzling:

Trojan.Security Toolbar
C:Documents and SettingsThespisFavoritesAntivirus Test Online.url

I tried to track it down, but most site were not in English. If you have this saved, Delete it.

1PPMemCheck.exe (found in the AdAware scan)
ppmemcheck.exe is an application from PestPatrol which disables SpyWare and MalWare on your system. It also does not need to be on the Startup menu.

Disable Acronis while you’re scanning:
C:Program FilesAcronisTrueImageHomeTrueImageMonitor.exe

In my opinion, you have many highly customizable processes running. They are all on the Start menu or in the Registry and start on boot, run in the background. Although the processes may actually be legitimate, the potential for conflict with other processes is great.

CAMusing

Posts: 179 +3

I wouldn’t be surprised if the new Ad-ware Anniverserity Edition is causing the conflict you are experiencing.

correction, Ad-Aware Anniversary Edition.

bobcat

Posts: 678 +69

I’ve had the problem before upgrading Ad-Aware. But the Anniversary Edition is faster and found objects missed by the previous version.

Thanks for the deep analysis and the specific advice. I shall do everything you recommend. I started with Bobbye’s suggestions because they seemed easier to apply at my level.

HJT: I’ve fixed everything you said and attach the latest log.
If you think there are further useless items, please advise.

1PPMemCheck.exe: I have disabled all PestPatrol monitoring activity, as I consider it useless. If anything, I’ll use that of Spybot S&D or SuperAS. Which one, if any, would you recommend?

C:Program FilesAcronisTrueImageHomeTrueImageMonitor.exe: I have similarly disabled all Acronis True Image startup activity, as I don’t use its scheduler etc.
Should I re-enable something?

Trojan.Security Toolbar: C:Documents and SettingsThespisFavoritesAntivirus Test Online.url: I couldn’t find this item, it has probably been removed by SuperAS.

It’s now disappointing that the problem still persists regardless all measures so far, but it occurs much later than it used to, e.g. when I search for non-existent items for which it runs a long time. Nevertheless, my system is now cleaner and more stable thanks to your advice.

As regards file sharing, I used to be active when I had less experience in avoiding malware but have since got wiser. However, I’ve had these items for a long time without apparent consequences.

And now I shall proceed with mflynn’s instructions.

mflynn

Posts: 2,653 +0

1PPMemCheck.exe: I have disabled all PestPatrol monitoring activity, as I consider it useless. If anything, I’ll use that of Spybot S&D or SuperAS. Which one, if any, would you recommend?

C:Program FilesAcronisTrueImageHomeTrueImageMonitor.exe: I have similarly disabled all Acronis True Image startup activity, as I don’t use its scheduler etc.
Should I re-enable something?

Your choice I don’t use any but I regularly every few days do MBAM and SAS scans. But if I did I would use SAS. And I agree to the disabling TrueImage if you use Acronis only manually when you want!

This is a Malware Startup that the program is missing. Removal instructions below.

Look carefully at Add/Remove programs uninstall any unused useless or outdated programs look for SiSoftware and decide what to do with it if there.

Download install and runAutoRuns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
Run it let it scan, then when it says ready at bottom left corner, make sure the EVERYTHING Tab is selected and then click File at top and then Find.

Type in the find box file not found and hit enter and delete all lines that have file not found.

There are a bunch of old stuff that M$ thought you might or would need that no longer exist or for computers that are assumed to have SCSI or AMD processors but do not!

After the file not found search scroll back to the top and highlight the very first entry so you are searching from the top and click Find and search for Trojan delete any entries related to Trojan.Security Toolbar.

Back to top click 1st entry and repeat Find for SiSoftware if you are removing it.

Then look carefully through all the other entries and delete anything that you may have had but uninstalled and thought was gone. If you are sure delete these also.

Then get install and run:
RunScanner http://www.runscanner.net/download.aspx
Click Scan computer
Double click all Red lines to select, then click Item fixer and remove them.

Then click Extra stuff again select all Red lines. Then click back to Malware hunting and Click the Item fixer again and remove these.

Same as already said on AutoRuns stuff that was assumed to be need but you do not have.

None of these items can run as the file is missing so most of the improvement you may see comes as a quicker startup as windows no longer searches or tries to load some of these. But some have noticed a faster shutdown also.

This may fix your search issue

This is a fantastic program for what it does, but because of what and how it does it job it is the best way I know to find a missing or corrupted DLL. usually done by Malware.

Basically it finds all DLL’s and unregisters then then re registers them, and in the process will find the missing or corrupt ones

Download Dial-A-Fix (DAF)

Have XP CD available in case DAF needs a file.

Check all boxes on the screen (clear any restrictions if it shows any)
Then click GO!

When the entire page is finished click the HammerHead at bottom to go to the second DAF page.

Here 1 at a time do the below

Flush DNS
Process Idle Tasks
Repair Permissions
Reset WMI/WBEM (not reinstall)

Watch for any File not found or other errors and make note as this may lead to the fix!

Источник

The explorer.exe runtime error can be due to memory issues and unpatched bugs, and the most common one is the low disk space error. Read to fix the runtime error.

How to Fix Runtime Errors in Windows 7 Explorer.exe

A runtime error is a problem that occurs during the execution of a program. The error may be caused by software or hardware failure. Sometimes, a way to fix it is to update the software or connect a hardware device. You can also try restarting your computer.

Another solution to fix runtime errors is to reinstall the software. However, this might take a while as the program will have to process the registry. Another method is to re-set Internet Explorer. To do this, open Internet Explorer and select the advanced tab. Click the reset button and wait until the process is complete. Finally, restart your PC to see if this fixes the problem.

Alternatively, you can use the DISM tool to restore missing or corrupted system files. It works by repairing Windows system files, so the error will no longer appear. Once you’ve run this tool, restart Windows and see if Windows Explorer is working again. If the error persists, you can also run the sfc /scannow command and see if the problem has been fixed.

You can also try the Windows Memory Diagnostic tool. This tool uses the Windows registry to manage the components of your system. You can fix most runtime errors by tweaking the registry. A registry editor software is available to fix the errors in Explorer.exe. This software is free to download and use.

Another possible reason for your Windows Explorer to crash is faulty shell extensions. If you’ve installed a program that uses Visual C++, the chances are high that it is causing the problem. If the program has been installed without the correct update package, reinstalling it may solve your problem. Alternatively, you can uninstall the program and use a dedicated uninstaller to remove its leftover files.

You can also try using the Windows Photo Viewer to open image files. It is the default application on Windows. If you’re using Explorer, it’s possible that Windows has not registered the Windows Explorer class.

How to Fix Runtime Errors Windows 10 Explorer.exe

A runtime error can cause problems with the startup of a program. When you try to start a program, you receive an error message that says something like «Runtime Error: Program cannot be launched.» This error message usually contains the file’s name causing the problem and offers suggestions on how to fix it.

One of the most common causes of this error is conflicting software. A number of these error-inflicting apps start running when Windows boots up. To fix this problem, you should disable all these apps from the startup menu. To do this, open the configuration window by typing «msconfig» in the run dialogue box. In addition, you can check the task manager to see which applications are causing the problem.

Another standard solution is to reset internet explorer. This method will fix the error for most users. However, this method isn’t as quick as deleting all the files causing this error. Besides, it would be best if you were patient, as this method requires you to open Internet Explorer.

Another effective way to recover your files is to use data recovery software. Free trial versions of these tools offer 100 MB of data recovery. The software can recover data of almost any nature, including those corrupted or damaged. Using a registry cleaner and proper antivirus software can also help you avoid runtime errors.

If the error persists, you can try a clean boot. Then, you can start the system again by disabling any applications. This will also help you optimize your PC. After completing this process, restart the computer. After restarting the system, you should be able to open the program again.

Suppose your computer’s Runtime Explorer error is preventing you from launching programs. In that case, you can use the Windows Memory Diagnostic Tool to troubleshoot the problem. The tool can test the memory on your PC and determine whether it is the root cause of the problem. Windows will suggest running the Memory Diagnostic tool when it suspects memory problems. However, some PCs may not automatically suggest it, so you’ll need to run the tool manually.

To diagnose the root cause of the issue, you must first determine whether your computer has enough RAM. This is the memory that your PC uses to store and process information. When your memory is low, your computer won’t be able to run programs properly. This issue can cause other problems, including software and application crashes.

If you think your RAM is the problem, you should try replacing it. If you can’t do that, try using a free memory diagnostic tool called Memtest86+. This software uses advanced memory diagnostic methods to detect insufficient RAM. Although it takes some time to run, Memtest86+ can help you find the problem and replace the RAM.

Windows PCs usually use a defragmenter tool to help you clean up your hard disk. This tool can help you re-align data on your hard drive and reunite fragmented files. This tool will also prevent Windows runtime errors and make your computer run faster.

Another helpful tool is the Hardware and Devices Troubleshooter. This tool can diagnose the problem without booting into Windows and provides more options when fixing a problem. It can also resolve the PC’s general issues, such as a corrupted file or driver. It will not repair physical damage, however. You can open this tool from the Command Prompt window or the Hardware and Devices window.

If the error continues, try reinstalling the software program or uninstalling the software. In some cases, this will fix the problem. Another way to diagnose the error is to perform a Windows Memory Diagnostic Tool. The tool runs automatically and can help you determine if your RAM is corrupt or not.

Various Types of Runtime Error

A runtime error is a problem that occurs during the execution of a program. These errors are caused by software or hardware malfunctions. These errors can also occur due to incorrect logic, such as if-then statements. If you are experiencing a runtime error, it is best to contact a support team to determine how to resolve the problem.

Despite their name, runtime errors can be challenging to resolve. Sometimes they affect only a small number of users and are difficult to reproduce. For instance, a social media script that is supposed to work fine on a high-speed, low-latency connection may fail when used in a location with the poor network coverage. Most runtime errors, however, are caused by human errors. Incorrect variable initialization, missing initialization of variables, and incorrect nesting of code can all cause runtime errors.

While runtime errors are not typically permanent, they can disrupt your workflow. They can occur due to many factors, including a lack of system resources and memory. In many cases, a simple computer restart will fix the error. But, sometimes, a runtime error can also be caused by malware or advertisement software.

Another reason a runtime error occurs is that specific software cannot run. Some of these errors can indicate problems predicted by the developers but not resolved. Other errors can occur because a software application is running two incompatible programs. Other problems that can cause runtime errors to include memory issues, file permissions, and problems with the number of code threads on a single machine.

Input/output device errors occur when a device fails to correctly perform read or write functions. Common causes of this problem include faulty USB ports and outdated driver versions. When this error occurs, users receive an error message stating they cannot access the device. They can also experience issues encoding files into the device. If you cannot access the device, it is best to restart the computer to resolve the issue.

A memory leak occurs when a program drains memory. The most common causes for this problem are older versions of unpatched software or programs that are not updated. For example, a program cannot correctly divide by zero in an Excel workbook. To avoid this error, the cell formula must be formatted.