Ошибка provider error no provider was found - ErrorsMaster.ru - большая энциклопедия ошибок и их решений

Те, кто хочет использовать Pancakeswap, не смогут этого сделать. Ошибка Pancakeswap не обнаружен провайдер несколько усложнила жизнь тем людям, которые используют свои браузеры для запуска веб-сайтов.

В течение некоторого времени люди перестали использовать свои ПК или ноутбуки для работы в Интернете. Все, что им нужно сделать, это достать мобильное устройство и запустить на нем браузер, чтобы пользоваться возможностями, предоставляемыми Интернетом.

В этом посте я расскажу о причинах, по которым Pancakeswap не может работать в обычном браузере, таком как Chrome, Safari и т. Д. Что наиболее важно, я также опишу способы, с помощью которых вы можете сделать это на своем мобильном телефоне. телефоны.

What is Pancakeswap No Provider Was Found

Из-за этой ошибки люди, которые хотят использовать сервисы Pancakeswap на своих мобильных телефонах, очень неудобны.

Эта ошибка также имеет некоторые проблемы с запуском в браузерах, поддерживаемых ПК и ноутбуками. Прочитав приведенные ниже отрывки, вы сможете запустить Pancakeswap без каких-либо ошибок.

Что такое «Блинный обмен, провайдер не найден»?

Никто не любит видеть ошибки. Но правда в том, что всем нам время от времени приходится сталкиваться с ошибками.

Чаще всего мы не несем ответственности за эти ошибки. Проще говоря, иногда нам показывают ошибки из-за того, как мы пытаемся запускать вещи.

Что касается сайта Pancakeswap, то ошибка связана с тем, что обычные браузеры не поддерживают эту услугу.

Очевидно, эта ошибка — тяжелая пилюля для всех, кто хочет ее использовать. Эта ошибка, т. Е. Pancakeswap No Provider не найден, кошелек доверия не отличается.

Но, к счастью, если есть желание, выход есть.

Чтобы обойти эту ошибку, важно, чтобы службы запускались через другой браузер, который специализируется на таких вещах.

В этом случае браузер DApp — это то, что вам нужно. Установить и использовать не так уж и сложно.

Как исправить ошибку Pancakeswap, в кошельке Trust не найден провайдер?

Нет сомнений в том, что ошибка Provide Error no Provider was Found может быть болезненной для вас. Но вы можете исправить эту ошибку, следуя некоторым инструкциям.

Таким образом, чтобы исправить это, вам нужно выполнить несколько простых шагов.

Сначала загрузите приложение Trust Wallet из официального магазина приложений, который поддерживает ваш мобильный телефон.

Во-вторых, после установки кошелька Trust убедитесь, что службы браузера DApp запущены и работают. Вы можете вручную включить этот браузер.

Теперь запустите браузер и найдите опцию «Популярные». Как только вы нажмете на него, вы попадете на страницу, где сможете открыть сервисы Pancakeswap.

Наконец, вам необходимо подключить Trust Wallet к Pancakeswap в DApp.

Вот и все. Следуя приведенным выше инструкциям, вы сможете использовать сервисы Pancakeswap с помощью DApp. Как только вы это сделаете, вы не увидите никаких ошибок.

Узнать больше Ошибка PS5 Spotify

Вывод:

Ошибки — это то, что никому не нравится. На самом деле, некоторых людей эти ошибки настолько расстраивают, что они клянутся не использовать приложения в следующий раз.

Но в конечном итоге им придется вернуться к этим приложениям, поскольку эти сайты и приложения играют важную роль во всей нашей работе.
Ошибка Pancakeswap — это такая ошибка, которая доставила неудобства пользователям.

В этом посте я попытался рассказать вам, что вызывает эту ошибку и как вы можете ее решить. Надеюсь, этот пост помог вам в ваших усилиях.

Источник

Are you trying to connect to Trust Wallet on the browser version on PancakeSwap?

If you are, you might get this error “No provider was found”.

Here’s the full error message, “Provider Error. No provider was found”.

As a result, you won’t be able to connect your Trust Wallet on PancakeSwap.

Additionally, you won’t be able to swap tokens.

Even if you have the Trust Wallet app on your device, you might not be able to connect it on PancakeSwap.

But why is this the case?

In this guide, you’ll learn what does “No provider was found” mean on PancakeSwap and how to fix it.

What does “No provider was found” mean on PancakeSwap?
How to fix “No provider was found” on PancakeSwap

What does “No provider was found” mean on PancakeSwap?

Provider Error No Provider Was Found PancakeSwap

“No provider was found” on PancakeSwap means that there’s an error with connecting your Trust Wallet with PancakeSwap.

It happens when you’re using PancakeSwap on a browser and not on the DApp browser on Trust Wallet.

If you’re using PancakeSwap on a browser, you won’t be able to connect to your Trust Wallet.

When you try connecting to your Trust Wallet, you’ll get a provider error.

This is because your mobile browser (e.g., Safari, Chrome) does not support decentralized applications like PancakeSwap.

Trust Wallet has a dedicated DApp browser that you can use to interact with any decentralized applications.

However, you need to enable it first.

By default, the DApp browser is not enabled on Trust Wallet.

Hence, you need to enable it via your mobile browser to use it.

Otherwise, you won’t be able to connect Trust Wallet to PancakeSwap.

To fix “No provider was found” on PancakeSwap, you need to enable the DApp browser on Trust Wallet.

Next, open PancakeSwap on the DApp browser and connect it with Trust Wallet.

This time, you’ll be able to connect Trust Wallet to PancakeSwap without any errors.

The cause of the “No provider was found” error is because you’re using PancakeSwap on a mobile browser.

Mobile browsers like Safari or Chromes do not support DApps.

On the other hand, Trust Wallet has a DApp browser that supports decentralized exchanges like PancakeSwap.

Hence, the first thing you need to do is to stop using PancakeSwap on your mobile browser.

Then, enable the DApp browser on Trust Wallet if you haven’t already.

Here’s how to fix “No provider was found” on PancakeSwap:

Method #1

1. Download Trust Wallet

The first step is to download Trust Wallet on your mobile device (if you haven’t already).

To begin with, go to the App Store or Google Play Store.

Once you’re on there, search for “Trust Wallet” on the search bar.

Then, tap on the first search result and download Trust Wallet.

After you’ve downloaded Trust Wallet, create a new wallet and verify your recovery phrase.

Once you’ve verified your recovery phrase, your wallet will be successfully created.

2. Enable the DApp browser

How to fix “No Provider Was Found” on PancakeSwap

Secondly, you need to enable the DApp browser on Trust Wallet.

The DApp browser allows you to use decentralized exchanges like PancakeSwap.

To do so, open a browser on your mobile device (e.g., Safari, Chrome).

Once you’re on the browser, enter this on the search bar “trust://browser_enable” and search for it.

Then, tap on “Open” to open the page on Trust Wallet.

After you’ve opened the page on Trust Wallet, the DApp browser will be enabled on it.

3. Open PancakeSwap

Now, open Trust Wallet and you’ll be able to see a browser icon on the bottom navigation bar.

Tap on the browser icon to open the DApp browser.

On the DApp browser, scroll down until you find the “Popular” header.

Under the “Popular” header, you’ll see the PancakeSwap app.

Tap on “PancakeSwap” to open PancakeSwap on the DApp browser.

4. Connect Trust Wallet to PancakeSwap

Once you’re on PancakeSwap, you’ll see a “Connect” button on the top navigation bar of the page.

If the button says “Connect” it means that you haven’t connected Trust Wallet yet.

Tap on “Connect” to connect to a wallet.

This step is similar to if you were to connect Trust Wallet to PancakeSwap on a mobile browser.

However, you’ll be connecting Trust Wallet to PancakeSwap on the DApp browser instead of your mobile browser.

After you’ve tapped on “Connect”, a pop-up box will open.

The pop-up box contains a list of wallets that you can connect to.

You’ll be able to connect to Metamask, TrustWallet, MathWallet, etc.

Tap on “TrustWallet” to connect to Trust Wallet.

This time, you will be able to successfully connect Trust Wallet to PancakeSwap because you’re using the DApp browser.

Now, you’ll be able to swap tokens on the exchange.

You’ve successfully learned how to fix the “No provider was found” error on PancakeSwap!

Method #2

1. Visit PancakeSwap on a browser & connect to “WalletConnect”

The second method to fix “No provider was found” on PancakeSwap is to use PancakeSwap on your browser.

Firstly, open a mobile browser (e.g., Safari, Chrome).

Then, go to the PancakeSwap website.

Once you’re on the website, tap on “Connect”.

After you’ve tapped on “Connect”, the “Connect to a wallet” pop-up will open.

On the pop-up, you’ll see a lost of wallets that you can connect to.

Instead of tapping on “TrustWallet”, tap on “WalletConnect”.

2. Connect to Trust Wallet

After you’ve tapped on “WalletConnect”, you’ll see a list of wallets that you can connect to.

You can connect to wallets like “Rainbow”, “Trust”, “Argent”, and others.

Tap on “Trust” to connect to Trust Wallet.

After you’ve tapped on “Trust”, a pop-up message will open.

The message will prompt you to open the page on Trust Wallet.

Tap on “Open” to open the page on Trust Wallet.

3. Tap on “Connect” & use PancakeSwap

After you’ve opened the page on Trust Wallet, you’ll see a “Connect” button.

If you don’t see the “Connect” button, try force closing Trust Wallet and opening it again.

Then, repeat the previous step.

Tap on “Connect” to connect Trust Wallet to PancakeSwap.

After you’ve tapped on “Connect”, Trust Wallet will be successfully connected to PancakeSwap.

You can confirm this by looking at the top-right corner of PancakeSwap.

In the top-right corner, you’ll see your Trust Wallet address.

You’ve successfully fixed the “No provider was found” error on PancakeSwap!

Conclusion

If you were to connect Trust Wallet to PancakeSwap on a mobile browser, it will not work.

In the future, if you want to use PancakeSwap on your mobile device, make sure to open it using the DApp browser on Trust Wallet and not on a mobile browser.

This is because PancakeSwap is not supported on mobile browsers.

However, you need to enable to DApp browser on Trust Wallet first before you can interact with decentralized applications.

Что такое «Блинный обмен, провайдер не найден»

Image Of What Is Pancakeswap No Provider Was Found

«Pancakeswap No Provider Was Found» — это досадная ошибка, с которой сталкиваются пользователи при подключении к Trust Wallet в браузерной версии PancakeSwap. Сообщение об ошибке гласит: Ошибка поставщика. Провайдер не найден».

В результате этой ошибки пользователи не могут подключиться к своему Trust Wallet на PancakeSwap и обменивать токены. Некоторые пользователи сообщают, что даже после наличия приложения Trust Wallet на своем устройстве они не могут подключить его к PancakeSwap.

Ошибка уведомляет о том, что при подключении Trust Wallet к PancakeSwap что-то не так. Пользователи, столкнувшиеся с этой ошибкой, говорят, что они использовали PancakeSwap в браузере, а не в браузере DApp в Trust Wallet. Итак, мы можем рассматривать это как одну из причин возникновения данной ошибки.

Ошибка также может быть вызвана тем, что используемый вами браузер не поддерживает децентрализованные приложения, такие как PancakeSwap. Чтобы не столкнуться с проблемой из-за этой ошибки, пользователям следует подумать об использовании специального браузера DApp Trust Wallet.

Этот браузер можно использовать для взаимодействия с любыми децентрализованными приложениями без каких-либо проблем. Если вы не включили браузер DApp, возможно, вы не сможете его использовать, потому что по умолчанию он отключен в Trust Wallet. Используя этот браузер, вы можете легко подключить Trust Wallet к PancakeSwap.

Как исправить Pancakeswap, в кошельке Trust не найден провайдер

Image Of How To Fix Pancakeswap No Provider Was Found In Trust Wallet

Чтобы избавиться от этой ошибки, пользователи должны сначала включить браузер DApp в Trust Wallet. После этого откройте PancakeSwap в браузере DApp и попробуйте подключить PancakeSwap к Trust Wallet. Включив браузер DApp, вы сможете подключить Trust Wallet к PancakeSwap без каких-либо ошибок.

Основная причина возникновения этой ошибки заключается в том, что вы используете PancakeSwap в простом мобильном браузере. Всегда помните, что мобильные браузеры, такие как Safari или Chromes, не поддерживают DApps. Следовательно, они будут появляться с ошибками.

В отличие от других браузеров, браузер DApp Trust Wallet специально разработан для децентрализованных обменов. Следовательно, он поддерживает обмены, такие как PancakeSwap. Итак, чтобы не столкнуться с проблемами в следующий раз, прекратите использовать PancakeSwap в своем мобильном браузере.

Именно, вы должны выполнить следующие шаги, чтобы исправить ошибку ».

Загрузите Trust Wallet на свое устройство.
Включите на нем браузер DApp.
Перейти к Pancakeswap
Нажмите на кнопку «Подключиться», чтобы подключиться к Trust Wallet.

Выполнив описанные выше шаги, вы сможете без проблем подключить свой Trust Wallet к Pancakeswap.

Вы также можете прочитать о Лучшие мем-монеты

Последние слова

Короче говоря, вы должны включить браузер DApp в Trust Wallet, чтобы иметь возможность подключаться к Pancakeswap, с простым мобильным браузером вы можете получить определенные ошибки, поскольку PancakeSwap не поддерживает мобильные браузеры.

Источник

HELP Provider Error — No provider was found

Hey y’all !

So I just discovered pancake swap and I’d like to use it, but I can’t seem to figure out what’s going on.

No matter what I do, when I try to connect all it says is «Provider Error — No provider was found». I use Binance so I’d like to go with that, but out of curiosity I tried to click the other wallets and they all end up saying the same.

What am I missing ? Any help would be welcome ! Thanks in advance !

Archived post. New comments cannot be posted and votes cannot be cast.

Источник

Common error messages. Use the sidebar ➡️to jump to the error you’re seeing.

Sometimes you may find yourself facing a problem that doesn’t have a clear solution. These troubleshooting tips may help you solve problems you run into.

INSUFFICIENT_OUTPUT_AMOUNT

The transaction cannot succeed due to error: PancakeRouter: INSUFFICIENT_OUTPUT_AMOUNT. This is probably an issue with one of the tokens you are swapping.

the transaction cannot succeed due to error: execution reverted: pancakerouter: insufficient_output_amount.

You’re trying to swap tokens, but your slippage tolerance is too low or liquidity is too low.

Refresh your page and try again later.

Try trading a smaller amount at one time.

Increase your slippage tolerance:

Tap the settings icon on the liquidity page.

Increase your slippage tolerance a little and try again.

Lastly, try inputting an amount with fewer decimal places.

This usually happens when trading tokens with low liquidity.

That means there isn’t enough of one of the tokens you’re trying to swap in the Liquidity Pool: it’s probably a small-cap token that few people are trading.

However, there’s also the chance that you’re trying to trade a scam token which cannot be sold. In this case, PancakeSwap isn’t able to block a token or return funds.

INSUFFICIENT_A_AMOUNT or INSUFFICIENT_B_AMOUNT

Fail with error ‘PancakeRouter: INSUFFICIENT_A_AMOUNT’
or
Fail with error ‘PancakeRouter: INSUFFICIENT_B_AMOUNT’

You’re trying to add/remove liquidity from a liquidity pool (LP), but there isn’t enough of one of the two tokens in the pair.

Refresh your page and try again, or try again later.

Tap the settings icon on the liquidity page.

Increase your slippage tolerance a little and try again.

The error is caused by trying to add or remove liquidity for a liquidity pool (LP) with an insufficient amount of token A or token B (one of the tokens in the pair).

It might be the case that prices are updating too fast when and your slippage tolerance is too low.

OK, so you’re really determined to fix this. We really don’t recommend doing this unless you know what you’re doing.

There currently isn’t a simple way to solve this issue from the PancakeSwap website: you’ll need to interact with the contract directly. You can add liquidity directly via the Router contract, while setting amountAMin to a small amount, then withdrawing all liquidity.

Select Write Contract, then Connect to Web3 and connect your wallet.

In section «1. approve», approve the LP token for the router by entering

spender (address): enter the contract address of the LP token you’re trying to interact with

In 5. balanceOf, input your wallet address and hit Query.

Keep track of the number that’s exported. It shows your balance within the LP in the uint256 format, which you’ll need in the next step.

Select Write Contract and Connect to Web3 as above.

Find addLiquidity or removeLiquidity (whichever one you’re trying to do)

Enter the token addresses of both of the tokens in the LP.

In liquidity (uint256), enter the uint256 number which you got from «balanceOf» above.

Set a low amountAMin or amountBMin: try 1 for both.

Add your wallet address in to (address).

Deadline must be an epoch time greater than the time the tx is executed.

This can cause very high slippage, and can cause the user to lose some funds if frontrun

The transaction cannot succeed due to error: PancakeRouter: EXPIRED. This is probably an issue with one of the tokens you are swapping.

Try again, but confirm (sign and broadcast) the transaction as soon as you generate it.

This happened because you started making a transaction, but you didn’t sign and broadcast it until it was past the deadline. That means you didn’t hit «Confirm» quickly enough.

The transaction cannot succeed due to error: Pancake: K. This is probably an issue with one of the tokens you are swapping.

Try modifying the amount on “To” field. Therefore putting «(estimated)» symbol on “From”. Then initiate the swap immediately.

This usually happen when you are trying to swap a token with its own fee.

The transaction cannot succeed due to error: execution reverted: Pancake: TRANSFER_FAILED.

Make sure you have 30% more tokens in your wallet than you intend to trade, or try to trade a lower amount. If you want to sell the maximum possible, try 70% or 69% instead of 100%.
Caused by the design of Restorative Rebase tokens like tDoge or tBTC.

Understand how restorative rebase tokens work

Another possible cause of this issue is the malicious token issuer just suspended the trading for their token. Or they made selling action only possible for selected wallet addresses. Please always do your own research to avoid any potential fraud. If the token you are trying to swap but failed with this error code is coming from an airdrop, that is most likely a scam. Please do not perform any token approval or follow any links, your fund may be at risk if you try to do so.

Transaction cannot succeed

Try trading a smaller amount, or increase slippage tolerance via the settings icon and try again. This is caused by low liquidity.

This transaction would fail. Please contact support

If you got this error while removing liquidity from a BNB pair:

Please select «Receive WBNB» and retry.

If you got this error while trying to swap:

Please contact the project team of the token you’re trying to swap. **** This issue must be resolved by the project team.

This issue (while swapping) is caused by tokens which have hard-coded the V1 PancakeSwap router into their contract.

While this practice is ill-advised at best, the reason for these projects having done this appears to be due to their tokenomics, in which each purchase sends a % of the token to LPs.

The projects affected will likely not work with the V2 router: they will most likely need to create new versions of their tokens pointing to our new router address, and migrate any existing token holders to their new token.

We recommend that any projects which created such tokens should also make efforts to prevent their users from adding them to V2 LP.

Cannot read property ‘toHexString’ of undefined

«Unknown error: «Cannot read property ‘toHexString’ of undefined»

When trying to swap tokens, the transaction fails and this error message is displayed. This error has been reported on mobile devices using Trust Wallet.

Attempt the transaction again with increased slippage allowance.

If 1. does not resolve your problem, consider using another wallet such as SafePal for your transaction.

This usually happens when trading tokens with insufficient slippage allowance on Trust Wallet.

The exact details of the problem are still being investigated.

Execution reverted: TransferHelper: TRANSFER_FROM_FAILED.

The transaction cannot succeed due to error: execution reverted: TransferHelper: TRANSFER_FROM_FAILED.

When trying to swap tokens, the transaction fails and this error message is displayed. This error has been reported across platforms.

Check to make sure you have sufficient funds available.

Ensure you have given the contract allowance to spend the amount of funds you’re attempting to trade with.

This error happens when trading tokens with insufficient allowance, or when a wallet has insufficient funds.
If you’re trading tokens with Restorative Rebase like tau assets tDoge or tBTC, make sure you understand how they work first with this

guide to Rebase tokens

Fail with error ‘ds-math-sub-underflow’

You’ve run out of allowance of your LP token allowance to the MasterChef contract.

Use token approval manager like unrekt or BscScan to

BEP20: burn amount exceeds balance

Fail with error ‘BEP20: burn amount exceeds balance’

You don’t have enough SYRUP in your wallet to unstake from the CAKE-CAKE pool.

Get at least as much SYRUP as the amount of CAKE that you’re trying to unstake.

Buy SYRUP on the exchange. If you want to unstake 100 CAKE, you need at least 100 SYRUP.

If that still fails, you can perform an “emergencyWithdraw” from the contract directly to unstake your staked tokens.

Click “Connect to Web3” and connect your wallet.

In section “4. emergencyWithdraw”, enter «0» and click “Write”.

This will unstake your staked tokens and lose any uncollected CAKE yield.

This will lose any yield that you haven’t harvested yet.

To stop this happening again, don’t sell your SYRUP. You still need it to unstake from the “Stake CAKE Earn CAKE” pool.

This error has happened because you have sold or transferred SYRUP tokens. SYRUP is minted in a 1:1 ratio to CAKE when you stake in the CAKE-CAKE Syrup Pool. SYRUP must be burned at a 1:1 ratio to CAKE when calling leaveStaking (unstaking your CAKE from the pool), so if you don’t have enough, you can’t unstake from the pool.

Warning! Error encountered during contract execution [out of gas]

You have set a low gas limit when trying to make a transaction.

Try manually increasing the gas limit (not gas price!) in your wallet before signing the transaction.

A limit of 200000 is usually enough.

The above example is from Metamask; check your wallet’s documentation if you aren’t sure how to adjust the gas limit.

Basically, your wallet (Metamask, Trust Wallet, etc.) can’t finish what it’s trying to do.

Your wallet estimates that the gas limit is too low, so the function call runs out of gas before the function call is finished.

BEP20: transfer amount exceeds allowance

Fail with error ‘BEP20: transfer amount exceeds allowance’

Use Unrekt.net to revoke approval for the smart contract you’re trying to interact with

Approve the contract again, without setting a limit on spend allowance

Try interacting with the contract again.

This happens when you set a limit on your spend allowance when you first approved the contract, then try to swap more than the limit.

BEP20: transfer amount exceeds balance

Fail with error ‘BEP20: transfer amount exceeds balance’

You’re probably trying to unstake from a Syrup Pool with low rewards in it. Solution below.

If not, you may be trying to send tokens that you don’t have in your wallet (for example, trying to send a token that is already assigned to a pending transaction). In this case, just make sure you have the tokens you’re trying to use.

Firstly,

let the team know

which pool you’re trying to unstake from, so they can top up the rewards. If you’re in a hurry to unstake and you don’t mind losing your pending yield, try an emergencyWithdraw:

You can perform an “emergencyWithdraw” from the contract directly to unstake your staked tokens.

Find the contract address of the Syrup Pool you’re trying to unstake from. You can find it in your wallet’s transaction log.

Click “Connect to Web3” and connect your wallet.

In section “3. emergencyWithdraw”, and click “Write”.

This will unstake your staked tokens and lose any uncollected yield.

This will lose any yield that you haven’t harvested yet.

This error tends to appear when you’re trying to unstake from an old Syrup Pool, but there aren’t enough rewards in the pool left for you to harvest when withdrawing. This causes the transaction to fail.

Provider Error
No provider was found

This happens when you try to connect via a browser extension like MetaMask or Binance Chain Wallet, but you haven’t installed the extension.

Switch your chain to BNB Smart Chain. Check your wallet’s documentation for a guide if you need help.

Already processing eth_requestAccounts. Please wait.

Make sure you are signed in to your wallet app and it’s connected to BNB Smart Chain.

Issues buying SAFEMOON and similar tokens

To trade SAFEMOON, you must click on the settings icon and set your slippage tolerance to 12% or more.
This is because SafeMoon taxes a 10% fee on each transaction:

5% fee = redistributed to all existing holders

5% fee = used to add liquidity

This is also why you might not receive as much of the token as you expect when you purchase.
Read more on

How to Buy Safe Moon

«MetaMask — RPC Error: Internal JSON-RPC error. estimateGas failed removeLiquidityETHWithPermitSupportingFeeOnTransferTokens estimateGas failed removeLiquidityETHWithPermit «

Happens when trying to remove liquidity on some tokens via Metamask. Root cause is still unknown. Try using an alternative wallet.

Internal JSON-RPC error. { «code»: -32000, «message»: «insufficient funds for transfer» } — Please try again.

You don’t have enough BNB to pay for the transaction fees. You need more BEP-20 network BNB in your wallet.

Error: [ethjs-query] while formatting outputs from RPC ‘{«value»:{«code»:-32603,»data»:{«code»:-32000,»message»:»transaction underpriced»}}}»

Increase the gas limit for the transaction in your wallet. Check your wallet’s documentation to learn how to increase gas limit.

Swap failed: Error: [ethjs-query] while formatting outputs from RPC ‘{«value»:{«code»:-32603,»data»:{«code»:-32603,»message»:»handle request error»}}}’

Cause unclear. Try these steps before trying again:

Oops! We couldn’t find any Pancake Collectibles in your wallet.

We’re investigating the logic behind this issue. Meanwhile please try the workaround.

Clear the cache and retry.

Retry on different browser.

Retry on different wallet apps.

Retry on the different network (switch between Wi-Fi and cellular)

Checking username keeps spinning

There are two possible causes.

You have multiple wallets installed on the browser.

Root cause: You have multiple wallets installed on the browser.

It may make a conflict between wallets. This is out of PancakeSwap’s control and we can do nothing.

Have only single wallet installed on browser, remove the others.

Reconnect the wallet and retry setting username again.

Root cause: Network is unstable.

Delete whatever has been entered in the text field completely.

Re-type username, then please wait for seconds.

If it doesn’t work, reload the page and retry again.

Источник

Что такое «Блинный обмен, провайдер не найден»?

Как исправить ошибку Pancakeswap, в кошельке Trust не найден провайдер?

Вывод:

What does “No provider was found” mean on PancakeSwap?

Method #1

1. Download Trust Wallet

2. Enable the DApp browser

3. Open PancakeSwap

4. Connect Trust Wallet to PancakeSwap

Method #2

1. Visit PancakeSwap on a browser & connect to “WalletConnect”

2. Connect to Trust Wallet

3. Tap on “Connect” & use PancakeSwap

Conclusion

Further reading

Что такое «Блинный обмен, провайдер не найден»

Как исправить Pancakeswap, в кошельке Trust не найден провайдер

Последние слова

INSUFFICIENT_OUTPUT_AMOUNT

INSUFFICIENT_A_AMOUNT or INSUFFICIENT_B_AMOUNT

Transaction cannot succeed

Cannot read property ‘toHexString’ of undefined

Execution reverted: TransferHelper: TRANSFER_FROM_FAILED.

Fail with error ‘ds-math-sub-underflow’

BEP20: burn amount exceeds balance

BEP20: transfer amount exceeds allowance

BEP20: transfer amount exceeds balance

Already processing eth_requestAccounts. Please wait.

Issues buying SAFEMOON and similar tokens

Oops! We couldn’t find any Pancake Collectibles in your wallet.

Checking username keeps spinning