Ошибка при обработке пакета samba configure

Доброго времени суток всем.
Я пытался настроить доступ к компьютеру с телефона через wi-fi, но что-то пошло не так. Телефон страшно затупил и несколько раз перезагрузился, а на компе перестал открываться system-config-samba. Я хотел через Muon переустановить пакеты samba и system-config-samba, но он сказал, что есть какие-то ошибки. В подробности он вдаваться не стал. Тогда я попробовал это сделать через терминал и вот результат:

Развернуть/свернуть скрытый текст.

Команда sudo apt-get -f install даёт тот же самый результат.
Эти пакеты удаляются без жалоб и вроде как устанавливаются, apt-get update говорит, что все пакеты имеют последнюю версию, но не настраиваиются, а я пока со всякими конфигурационными файлами не очень разобрался. Подскажите, пожалуйста.

Страницы: [1]   Вниз

0 Пользователей и 1 Гость просматривают эту тему.

---

---

---

---

---

Страницы: [1]   Вверх

Получено:49 http://mirror.yandex.ru/debian/ jessie/main libnettle4 i386 2.7.1-5+deb8u1 [179 kB]
Получено:50 http://mirror.yandex.ru/debian/ jessie/main libnettle4 amd64 2.7.1-5+deb8u1 [176 kB]
Получено:51 http://mirror.yandex.ru/debian/ jessie/main libarchive13 amd64 3.1.2-11+deb8u1 [269 kB]
Получено:52 http://mirror.yandex.ru/debian/ jessie/main libglib2.0-bin amd64 2.42.1-1+b1 [1 336 kB]
Получено:53 http://mirror.yandex.ru/debian/ jessie/main libglib2.0-0 i386 2.42.1-1+b1 [2 459 kB]
Получено:54 http://mirror.yandex.ru/debian/ jessie/main libglib2.0-0 amd64 2.42.1-1+b1 [2 401 kB]
Получено:55 http://mirror.yandex.ru/debian/ jessie/main librsvg2-common amd64 2.40.5-1+deb8u2 [170 kB]
Получено:56 http://mirror.yandex.ru/debian/ jessie/main librsvg2-2 amd64 2.40.5-1+deb8u2 [249 kB]
Получено:57 http://mirror.yandex.ru/debian/ jessie/main libgtk2.0-common all 2.24.25-3+deb8u1 [3 185 kB]
Получено:58 http://mirror.yandex.ru/debian/ jessie/main gtk2-engines-pixbuf amd64 2.24.25-3+deb8u1 [544 kB]
Получено:59 http://mirror.yandex.ru/debian/ jessie/main libgail-common amd64 2.24.25-3+deb8u1 [637 kB]
Получено:60 http://mirror.yandex.ru/debian/ jessie/main libgail18 amd64 2.24.25-3+deb8u1 [539 kB]
Получено:61 http://mirror.yandex.ru/debian/ jessie/main libgtk2.0-bin amd64 2.24.25-3+deb8u1 [534 kB]
Получено:62 http://mirror.yandex.ru/debian/ jessie/main libgtk2.0-0 amd64 2.24.25-3+deb8u1 [2 306 kB]
Получено:63 http://mirror.yandex.ru/debian/ jessie/main libcairo2 amd64 1.14.0-2.1+deb8u1 [746 kB]
Получено:64 http://mirror.yandex.ru/debian/ jessie/main libcairo-gobject2 amd64 1.14.0-2.1+deb8u1 [304 kB]
Получено:65 http://mirror.yandex.ru/debian/ jessie/main libdevmapper-event1.02.1 amd64 2:1.02.90-2.2+deb8u1 [35,8 kB]
Получено:66 http://mirror.yandex.ru/debian/ jessie/main libebml4 amd64 1.3.0-2+deb8u1 [56,0 kB]
Получено:67 http://mirror.yandex.ru/debian/ jessie/main libgif4 i386 4.1.6-11+deb8u1 [41,0 kB]
Получено:68 http://mirror.yandex.ru/debian/ jessie/main libgif4 amd64 4.1.6-11+deb8u1 [40,0 kB]
Получено:69 http://mirror.yandex.ru/debian/ jessie/main libgudev-1.0-0 i386 215-17+deb8u4 [41,4 kB]
Получено:70 http://mirror.yandex.ru/debian/ jessie/main libgudev-1.0-0 amd64 215-17+deb8u4 [41,1 kB]
Получено:71 http://mirror.yandex.ru/debian/ jessie/main libjansson4 amd64 2.7-1+deb8u1 [34,1 kB]
Получено:72 http://mirror.yandex.ru/debian/ jessie/main libksba8 amd64 1.3.2-1+deb8u1 [94,4 kB]
Получено:73 http://mirror.yandex.ru/debian/ jessie/main liblvm2app2.2 amd64 2.02.111-2.2+deb8u1 [420 kB]
Получено:74 http://mirror.yandex.ru/debian/ jessie/main libmatroska6 amd64 1.4.1-2+deb8u1 [121 kB]
Получено:75 http://mirror.yandex.ru/debian/ jessie/main libndp0 amd64 1.4-2+deb8u1 [10,8 kB]
Получено:76 http://mirror.yandex.ru/debian/ jessie/main libpoppler46 amd64 0.26.5-2+deb8u1 [1 211 kB]
Получено:77 http://mirror.yandex.ru/debian/ jessie/main libpoppler-glib8 amd64 0.26.5-2+deb8u1 [121 kB]
Получено:78 http://mirror.yandex.ru/debian/ jessie/main libsane amd64 1.0.24-8+deb8u1 [2 039 kB]
Получено:79 http://mirror.yandex.ru/debian/ jessie/main libsane i386 1.0.24-8+deb8u1 [2 112 kB]
Получено:80 http://mirror.yandex.ru/debian/ jessie/main libsane-dev amd64 1.0.24-8+deb8u1 [2 212 kB]
Получено:81 http://mirror.yandex.ru/debian/ jessie/main libsane-common all 1.0.24-8+deb8u1 [1 000 kB]
Получено:82 http://mirror.yandex.ru/debian/ jessie/main libsndfile1 i386 1.0.25-9.1+deb8u1 [232 kB]
Получено:83 http://mirror.yandex.ru/debian/ jessie/main libsndfile1 amd64 1.0.25-9.1+deb8u1 [215 kB]
Получено:84 http://mirror.yandex.ru/debian/ jessie/main subversion amd64 1.8.10-6+deb8u4 [923 kB]
Получено:85 http://mirror.yandex.ru/debian/ jessie/main libsvn1 amd64 1.8.10-6+deb8u4 [1 076 kB]
Получено:86 http://mirror.yandex.ru/debian/ jessie-updates/main tzdata-java all 2016f-0+deb8u1 [81,5 kB]
Получено:87 http://mirror.yandex.ru/debian/ jessie-updates/main tzdata all 2016f-0+deb8u1 [185 kB]
Получено:88 http://mirror.yandex.ru/debian/ jessie/main multiarch-support amd64 2.19-18+deb8u4 [180 kB]
Получено:89 http://mirror.yandex.ru/debian/ jessie/main apt-utils amd64 1.0.9.8.3 [368 kB]
Получено:90 http://mirror.yandex.ru/debian/ jessie/main libxapian22 amd64 1.2.19-1+deb8u1 [983 kB]
Получено:91 http://mirror.yandex.ru/debian/ jessie/main locales all 2.19-18+deb8u4 [3 945 kB]
Получено:92 http://mirror.yandex.ru/debian/ jessie/main dpkg-dev all 1.17.27 [1 548 kB]
Получено:93 http://mirror.yandex.ru/debian/ jessie/main libdpkg-perl all 1.17.27 [1 075 kB]
Получено:94 http://mirror.yandex.ru/debian/ jessie/main evince amd64 3.14.1-2+deb8u1 [742 kB]
Получено:95 http://mirror.yandex.ru/debian/ jessie/main libevdocument3-4 amd64 3.14.1-2+deb8u1 [775 kB]
Получено:96 http://mirror.yandex.ru/debian/ jessie/main libevview3-3 amd64 3.14.1-2+deb8u1 [708 kB]
Получено:97 http://mirror.yandex.ru/debian/ jessie/main evince-common all 3.14.1-2+deb8u1 [2 184 kB]
Получено:98 http://mirror.yandex.ru/debian/ jessie/main gir1.2-evince-3.0 amd64 3.14.1-2+deb8u1 [617 kB]
Получено:99 http://mirror.yandex.ru/debian/ jessie/main gir1.2-gtk-2.0 amd64 2.24.25-3+deb8u1 [696 kB]
Получено:100 http://mirror.yandex.ru/debian/ jessie/main libservlet2.5-java all 6.0.45+dfsg-1~deb8u1 [220 kB]
Получено:101 http://mirror.yandex.ru/debian/ jessie/main libsrtp0 amd64 1.4.5~20130609~dfsg-1.1+deb8u1 [65,2 kB]
Получено:102 http://mirror.yandex.ru/debian/ jessie/main openssl amd64 1.0.1t-1+deb8u2 [664 kB]
Получено:103 http://mirror.yandex.ru/debian/ jessie/main poppler-utils amd64 0.26.5-2+deb8u1 [140 kB]
Получено:104 http://mirror.yandex.ru/debian/ jessie/main sane-utils amd64 1.0.24-8+deb8u1 [223 kB]
Получено:105 http://mirror.yandex.ru/debian/ jessie/main xscreensaver-data amd64 5.30-1+deb8u2 [300 kB]
Получено:106 http://mirror.yandex.ru/debian/ jessie/main xscreensaver amd64 5.30-1+deb8u2 [561 kB]
Получено:107 http://mirror.yandex.ru/debian/ jessie/main gnome-shell-extension-weather all 0~20151125.gitccaa1eb-1~deb8u1 [68,4 kB]
Получено:108 http://mirror.yandex.ru/debian/ jessie/main nmap amd64 6.47-3+deb8u2 [3 973 kB]
Получено:109 http://security.debian.org/ jessie/updates/main libxml2-dev amd64 2.9.1+dfsg1-5+deb8u2 [695 kB]
Получено:110 http://security.debian.org/ jessie/updates/main libxml2 i386 2.9.1+dfsg1-5+deb8u2 [835 kB]
Получено:111 http://mirror.yandex.ru/debian/ jessie/main ndiff all 6.47-3+deb8u2 [257 kB]
Получено:112 http://security.debian.org/ jessie/updates/main libxml2 amd64 2.9.1+dfsg1-5+deb8u2 [802 kB]
Получено:113 http://security.debian.org/ jessie/updates/main apache2.2-bin amd64 2.4.10-10+deb8u5 [1 704 B]
Получено:114 http://security.debian.org/ jessie/updates/main apache2-bin amd64 2.4.10-10+deb8u5 [1 032 kB]
Получено:115 http://security.debian.org/ jessie/updates/main libmagickwand-6.q16-2 amd64 8:6.8.9.9-5+deb8u3 [404 kB]
Получено:116 http://security.debian.org/ jessie/updates/main libmagickcore-6.q16-2 amd64 8:6.8.9.9-5+deb8u3 [1 686 kB]
Получено:117 http://security.debian.org/ jessie/updates/main imagemagick-common all 8:6.8.9.9-5+deb8u3 [150 kB]
Получено:118 http://security.debian.org/ jessie/updates/main libavutil54 i386 6:11.7-1~deb8u1 [191 kB]
Получено:119 http://security.debian.org/ jessie/updates/main libavutil54 amd64 6:11.7-1~deb8u1 [127 kB]
Получено:120 http://security.debian.org/ jessie/updates/main libavresample2 amd64 6:11.7-1~deb8u1 [99,6 kB]
Получено:121 http://security.debian.org/ jessie/updates/main libavresample2 i386 6:11.7-1~deb8u1 [124 kB]
Получено:122 http://security.debian.org/ jessie/updates/main libavcodec56 i386 6:11.7-1~deb8u1 [5 915 kB]
Получено:123 http://security.debian.org/ jessie/updates/main libavcodec56 amd64 6:11.7-1~deb8u1 [3 105 kB]
Получено:124 http://security.debian.org/ jessie/updates/main libavformat56 amd64 6:11.7-1~deb8u1 [582 kB]
Получено:125 http://security.debian.org/ jessie/updates/main libreoffice-base-drivers amd64 1:4.3.3-2+deb8u5 [602 kB]
Получено:126 http://security.debian.org/ jessie/updates/main libreoffice-base amd64 1:4.3.3-2+deb8u5 [1 658 kB]
Получено:127 http://security.debian.org/ jessie/updates/main libreoffice-calc amd64 1:4.3.3-2+deb8u5 [6 454 kB]
Получено:128 http://security.debian.org/ jessie/updates/main libreoffice-impress amd64 1:4.3.3-2+deb8u5 [1 092 kB]
Получено:129 http://security.debian.org/ jessie/updates/main libreoffice-draw amd64 1:4.3.3-2+deb8u5 [2 561 kB]
Получено:130 http://security.debian.org/ jessie/updates/main libreoffice-evolution amd64 1:4.3.3-2+deb8u5 [148 kB]
Получено:131 http://security.debian.org/ jessie/updates/main libreoffice-gnome amd64 1:4.3.3-2+deb8u5 [125 kB]
Получено:132 http://security.debian.org/ jessie/updates/main libreoffice-gtk amd64 1:4.3.3-2+deb8u5 [284 kB]
Получено:133 http://security.debian.org/ jessie/updates/main libreoffice-writer amd64 1:4.3.3-2+deb8u5 [7 761 kB]
Получено:134 http://security.debian.org/ jessie/updates/main uno-libs3 amd64 4.3.3-2+deb8u5 [786 kB]
Получено:135 http://security.debian.org/ jessie/updates/main ure amd64 4.3.3-2+deb8u5 [1 841 kB]
Получено:136 http://security.debian.org/ jessie/updates/main python3-uno amd64 1:4.3.3-2+deb8u5 [166 kB]
Получено:137 http://security.debian.org/ jessie/updates/main libreoffice-base-core amd64 1:4.3.3-2+deb8u5 [829 kB]
Получено:138 http://security.debian.org/ jessie/updates/main libreoffice amd64 1:4.3.3-2+deb8u5 [70,4 kB]
Получено:139 http://security.debian.org/ jessie/updates/main libreoffice-math amd64 1:4.3.3-2+deb8u5 [408 kB]
Получено:140 http://security.debian.org/ jessie/updates/main libreoffice-common all 1:4.3.3-2+deb8u5 [22,3 MB]
Получено:141 http://security.debian.org/ jessie/updates/main libreoffice-core amd64 1:4.3.3-2+deb8u5 [30,5 MB]
Получено:142 http://security.debian.org/ jessie/updates/main libreoffice-style-galaxy all 1:4.3.3-2+deb8u5 [1 711 kB]
Получено:143 http://security.debian.org/ jessie/updates/main libreoffice-style-tango all 1:4.3.3-2+deb8u5 [1 801 kB]
Получено:144 http://security.debian.org/ jessie/updates/main libgdk-pixbuf2.0-common all 2.31.1-2+deb8u5 [294 kB]
Получено:145 http://security.debian.org/ jessie/updates/main libgdk-pixbuf2.0-0 amd64 2.31.1-2+deb8u5 [167 kB]
Получено:146 http://security.debian.org/ jessie/updates/main fonts-opensymbol all 2:102.6+LibO4.3.3-2+deb8u5 [147 kB]
Получено:147 http://security.debian.org/ jessie/updates/main libreoffice-report-builder-bin amd64 1:4.3.3-2+deb8u5 [884 kB]
Получено:148 http://security.debian.org/ jessie/updates/main libreoffice-avmedia-backend-gstreamer amd64 1:4.3.3-2+deb8u5 [80,6 kB]
Получено:149 http://security.debian.org/ jessie/updates/main libreoffice-java-common all 1:4.3.3-2+deb8u5 [2 055 kB]
Получено:150 http://security.debian.org/ jessie/updates/main libcurl3-gnutls amd64 7.38.0-4+deb8u4 [251 kB]
Получено:151 http://security.debian.org/ jessie/updates/main libexpat1-dev amd64 2.1.0-6+deb8u3 [126 kB]
Получено:152 http://security.debian.org/ jessie/updates/main libexpat1 i386 2.1.0-6+deb8u3 [84,1 kB]
Получено:153 http://security.debian.org/ jessie/updates/main libexpat1 amd64 2.1.0-6+deb8u3 [80,0 kB]
Получено:154 http://security.debian.org/ jessie/updates/main libxslt1.1 i386 1.1.28-2+deb8u1 [241 kB]
Получено:155 http://security.debian.org/ jessie/updates/main libxslt1.1 amd64 1.1.28-2+deb8u1 [232 kB]
Получено:156 http://security.debian.org/ jessie/updates/main curl amd64 7.38.0-4+deb8u4 [200 kB]
Получено:157 http://security.debian.org/ jessie/updates/main libcurl3 amd64 7.38.0-4+deb8u4 [259 kB]
Получено:158 http://security.debian.org/ jessie/updates/main libgd3 i386 2.1.0-5+deb8u6 [151 kB]
Получено:159 http://security.debian.org/ jessie/updates/main libgd3 amd64 2.1.0-5+deb8u6 [148 kB]
Получено:160 http://security.debian.org/ jessie/updates/main libmagick++-6.q16-5 amd64 8:6.8.9.9-5+deb8u3 [255 kB]
Получено:161 http://security.debian.org/ jessie/updates/main mysql-common all 5.5.50-0+deb8u1 [81,8 kB]
Получено:162 http://security.debian.org/ jessie/updates/main libmysqlclient18 amd64 5.5.50-0+deb8u1 [675 kB]
Получено:163 http://security.debian.org/ jessie/updates/main libswscale3 amd64 6:11.7-1~deb8u1 [141 kB]
Получено:164 http://security.debian.org/ jessie/updates/main libtalloc2 amd64 2.1.2-0+deb8u1 [37,0 kB]
Получено:165 http://security.debian.org/ jessie/updates/main python-tdb amd64 1.3.6-0+deb8u1 [14,9 kB]
Получено:166 http://security.debian.org/ jessie/updates/main libtdb1 amd64 1.3.6-0+deb8u1 [42,6 kB]
Получено:167 http://security.debian.org/ jessie/updates/main libtevent0 amd64 0.9.25-0+deb8u1 [26,3 kB]
Получено:168 http://security.debian.org/ jessie/updates/main openjdk-7-jre amd64 7u111-2.6.7-1~deb8u1 [176 kB]
Получено:169 http://security.debian.org/ jessie/updates/main openjdk-7-jre-headless amd64 7u111-2.6.7-1~deb8u1 [39,4 MB]
Получено:170 http://security.debian.org/ jessie/updates/main python-talloc amd64 2.1.2-0+deb8u1 [10,4 kB]
Получено:171 http://security.debian.org/ jessie/updates/main exim4-config all 4.84.2-2+deb8u1 [503 kB]
Получено:172 http://security.debian.org/ jessie/updates/main exim4 all 4.84.2-2+deb8u1 [8 544 B]
Получено:173 http://security.debian.org/ jessie/updates/main exim4-base amd64 4.84.2-2+deb8u1 [1 049 kB]
Получено:174 http://security.debian.org/ jessie/updates/main exim4-daemon-light amd64 4.84.2-2+deb8u1 [632 kB]
Получено:175 http://security.debian.org/ jessie/updates/main openssh-sftp-server amd64 1:6.7p1-5+deb8u3 [38,0 kB]
Получено:176 http://security.debian.org/ jessie/updates/main openssh-server amd64 1:6.7p1-5+deb8u3 [331 kB]
Получено:177 http://security.debian.org/ jessie/updates/main openssh-client amd64 1:6.7p1-5+deb8u3 [690 kB]
Получено:178 http://security.debian.org/ jessie/updates/main libgimp2.0 amd64 2.8.14-1+deb8u1 [1 668 kB]
Получено:179 http://security.debian.org/ jessie/updates/main gimp-data all 2.8.14-1+deb8u1 [8 413 kB]
Получено:180 http://security.debian.org/ jessie/updates/main gimp amd64 2.8.14-1+deb8u1 [4 389 kB]
Получено:181 http://security.debian.org/ jessie/updates/main gir1.2-gdkpixbuf-2.0 amd64 2.31.1-2+deb8u5 [16,8 kB]
Получено:182 http://security.debian.org/ jessie/updates/main imagemagick amd64 8:6.8.9.9-5+deb8u3 [156 kB]
Получено:183 http://security.debian.org/ jessie/updates/main imagemagick-6.q16 amd64 8:6.8.9.9-5+deb8u3 [509 kB]
Получено:184 http://security.debian.org/ jessie/updates/main libimage-magick-q16-perl amd64 8:6.8.9.9-5+deb8u3 [221 kB]
Получено:185 http://security.debian.org/ jessie/updates/main libintl-perl all 1.23-1+deb8u1 [847 kB]
Получено:186 http://security.debian.org/ jessie/updates/main libmagickcore-6.q16-2-extra amd64 8:6.8.9.9-5+deb8u3 [171 kB]
Получено:187 http://security.debian.org/ jessie/updates/main libnet-dns-perl amd64 0.81-2+deb8u1 [331 kB]
Получено:188 http://security.debian.org/ jessie/updates/main pidgin amd64 2.11.0-0+deb8u1 [619 kB]
Получено:189 http://security.debian.org/ jessie/updates/main libpurple0 amd64 2.11.0-0+deb8u1 [1 386 kB]
Получено:190 http://security.debian.org/ jessie/updates/main pidgin-data all 2.11.0-0+deb8u1 [4 920 kB]
Получено:191 http://security.debian.org/ jessie/updates/main libpurple-bin all 2.11.0-0+deb8u1 [122 kB]
Получено:192 http://security.debian.org/ jessie/updates/main libreoffice-help-en-us all 1:4.3.3-2+deb8u5 [2 386 kB]
Получено:193 http://security.debian.org/ jessie/updates/main libreoffice-l10n-ru all 1:4.3.3-2+deb8u5 [502 kB]
Получено:194 http://security.debian.org/ jessie/updates/main libreoffice-help-ru all 1:4.3.3-2+deb8u5 [3 508 kB]
Получено:195 http://security.debian.org/ jessie/updates/main libreoffice-sdbc-firebird amd64 1:4.3.3-2+deb8u5 [172 kB]
Получено:196 http://security.debian.org/ jessie/updates/main libreoffice-sdbc-hsqldb amd64 1:4.3.3-2+deb8u5 [177 kB]
Получено:197 http://security.debian.org/ jessie/updates/main vlc-plugin-samba amd64 2.2.4-1~deb8u1 [4 914 B]
Получено:198 http://security.debian.org/ jessie/updates/main vlc-plugin-notify amd64 2.2.4-1~deb8u1 [5 406 B]
Получено:199 http://security.debian.org/ jessie/updates/main vlc amd64 2.2.4-1~deb8u1 [1 501 kB]
Получено:200 http://security.debian.org/ jessie/updates/main libvlccore8 amd64 2.2.4-1~deb8u1 [392 kB]
Получено:201 http://security.debian.org/ jessie/updates/main vlc-data all 2.2.4-1~deb8u1 [5 992 kB]
Получено:202 http://security.debian.org/ jessie/updates/main vlc-nox amd64 2.2.4-1~deb8u1 [2 531 kB]
Получено:203 http://security.debian.org/ jessie/updates/main libvlc5 amd64 2.2.4-1~deb8u1 [47,3 kB]
Получено:204 http://security.debian.org/ jessie/updates/main linux-compiler-gcc-4.8-x86 amd64 3.16.7-ckt25-2+deb8u3 [325 kB]
Получено:205 http://security.debian.org/ jessie/updates/main linux-headers-3.16.0-4-amd64 amd64 3.16.7-ckt25-2+deb8u3 [451 kB]
Получено:206 http://security.debian.org/ jessie/updates/main linux-headers-3.16.0-4-common amd64 3.16.7-ckt25-2+deb8u3 [4 521 kB]
Получено:207 http://security.debian.org/ jessie/updates/main p7zip amd64 9.20.1~dfsg.1-4.1+deb8u2 [318 kB]
Получено:208 http://security.debian.org/ jessie/updates/main p7zip-full amd64 9.20.1~dfsg.1-4.1+deb8u2 [924 kB]
Получено:209 http://security.debian.org/ jessie/updates/main python-libxml2 amd64 2.9.1+dfsg1-5+deb8u2 [195 kB]
Получено 320 MБ за 8мин 13с (649 kБ/c)                                         
Чтение журнала изменений... Выполнено                 
apt-listchanges: Отправка почты root: apt-listchanges: новости о debian-01
Извлечение шаблонов из пакетов: 100%
Предварительная настройка пакетов ...
(Чтение базы данных ... на данный момент установлено 247218 файлов и каталогов.)
Подготовка к распаковке .../base-files_8+deb8u5_amd64.deb ...
Распаковывается base-files (8+deb8u5) на замену (8+deb8u3) ...
Обрабатываются триггеры для man-db (2.7.0.2-5) ...
Обрабатываются триггеры для install-info (5.2.0.dfsg.1-6) ...
Обрабатываются триггеры для cracklib-runtime (2.9.2-1) ...
Настраивается пакет base-files (8+deb8u5) ...
Устанавливается новая версия файла настройки /etc/debian_version ...
(Чтение базы данных ... на данный момент установлено 247218 файлов и каталогов.)
Подготовка к распаковке .../dpkg_1.17.27_amd64.deb ...
Распаковывается dpkg (1.17.27) на замену (1.17.26) ...
Обрабатываются триггеры для man-db (2.7.0.2-5) ...
Настраивается пакет dpkg (1.17.27) ...
(Чтение базы данных ... на данный момент установлено 247218 файлов и каталогов.)
Подготовка к распаковке .../libc6-dev_2.19-18+deb8u4_i386.deb ...
Деконфигурируется libc6-dev:amd64 (2.19-18+deb8u3) ...
Распаковывается libc6-dev:i386 (2.19-18+deb8u4) на замену (2.19-18+deb8u3) ...
Подготовка к распаковке .../libc6-dev_2.19-18+deb8u4_amd64.deb ...
Распаковывается libc6-dev:amd64 (2.19-18+deb8u4) на замену (2.19-18+deb8u3) ...
Подготовка к распаковке .../libc-dev-bin_2.19-18+deb8u4_amd64.deb ...
Распаковывается libc-dev-bin (2.19-18+deb8u4) на замену (2.19-18+deb8u3) ...
Подготовка к распаковке .../libc-bin_2.19-18+deb8u4_amd64.deb ...
Распаковывается libc-bin (2.19-18+deb8u4) на замену (2.19-18+deb8u3) ...
Обрабатываются триггеры для man-db (2.7.0.2-5) ...
Настраивается пакет libc-bin (2.19-18+deb8u4) ...
(Чтение базы данных ... на данный момент установлено 247217 файлов и каталогов.)
Подготовка к распаковке .../libc6_2.19-18+deb8u4_amd64.deb ...
Деконфигурируется libc6:i386 (2.19-18+deb8u3) ...
Распаковывается libc6:amd64 (2.19-18+deb8u4) на замену (2.19-18+deb8u3) ...
Подготовка к распаковке .../libc6_2.19-18+deb8u4_i386.deb ...
Распаковывается libc6:i386 (2.19-18+deb8u4) на замену (2.19-18+deb8u3) ...
Настраивается пакет libc6:i386 (2.19-18+deb8u4) ...
Настраивается пакет libc6:amd64 (2.19-18+deb8u4) ...
Обрабатываются триггеры для libc-bin (2.19-18+deb8u4) ...
(Чтение базы данных ... на данный момент установлено 247217 файлов и каталогов.)
Подготовка к распаковке .../libc6-i686_2.19-18+deb8u4_i386.deb ...
Распаковывается libc6-i686:i386 (2.19-18+deb8u4) на замену (2.19-18+deb8u3) ...
Подготовка к распаковке .../linux-libc-dev_3.16.7-ckt25-2+deb8u3_amd64.deb ...
Деконфигурируется linux-libc-dev:i386 (3.16.7-ckt20-1+deb8u4) ...
Распаковывается linux-libc-dev:amd64 (3.16.7-ckt25-2+deb8u3) на замену (3.16.7-ckt20-1+deb8u4) ...
Подготовка к распаковке .../linux-libc-dev_3.16.7-ckt25-2+deb8u3_i386.deb ...
Распаковывается linux-libc-dev:i386 (3.16.7-ckt25-2+deb8u3) на замену (3.16.7-ckt20-1+deb8u4) ...
Подготовка к распаковке .../libperl5.20_5.20.2-3+deb8u6_amd64.deb ...
Распаковывается libperl5.20 (5.20.2-3+deb8u6) на замену (5.20.2-3+deb8u4) ...
Подготовка к распаковке .../perl_5.20.2-3+deb8u6_amd64.deb ...
Распаковывается perl (5.20.2-3+deb8u6) на замену (5.20.2-3+deb8u4) ...
Подготовка к распаковке .../perl-base_5.20.2-3+deb8u6_amd64.deb ...
Распаковывается perl-base (5.20.2-3+deb8u6) на замену (5.20.2-3+deb8u4) ...
Обрабатываются триггеры для man-db (2.7.0.2-5) ...
Настраивается пакет perl-base (5.20.2-3+deb8u6) ...
(Чтение базы данных ... на данный момент установлено 247218 файлов и каталогов.)
Подготовка к распаковке .../perl-modules_5.20.2-3+deb8u6_all.deb ...
Распаковывается perl-modules (5.20.2-3+deb8u6) на замену (5.20.2-3+deb8u4) ...
Подготовка к распаковке .../libmodule-build-perl_0.421000-2+deb8u1_all.deb ...
Распаковывается libmodule-build-perl (0.421000-2+deb8u1) на замену (0.421000-2) ...
Подготовка к распаковке .../libapt-pkg4.12_1.0.9.8.3_amd64.deb ...
Распаковывается libapt-pkg4.12:amd64 (1.0.9.8.3) на замену (1.0.9.8.2) ...
Обрабатываются триггеры для man-db (2.7.0.2-5) ...
Настраивается пакет libapt-pkg4.12:amd64 (1.0.9.8.3) ...
Обрабатываются триггеры для libc-bin (2.19-18+deb8u4) ...
(Чтение базы данных ... на данный момент установлено 247219 файлов и каталогов.)
Подготовка к распаковке .../gpgv_1.4.18-7+deb8u1_amd64.deb ...
Распаковывается gpgv (1.4.18-7+deb8u1) на замену (1.4.18-7) ...
Обрабатываются триггеры для man-db (2.7.0.2-5) ...
Настраивается пакет gpgv (1.4.18-7+deb8u1) ...
(Чтение базы данных ... на данный момент установлено 247219 файлов и каталогов.)
Подготовка к распаковке .../gnupg_1.4.18-7+deb8u1_amd64.deb ...
Распаковывается gnupg (1.4.18-7+deb8u1) на замену (1.4.18-7) ...
Обрабатываются триггеры для man-db (2.7.0.2-5) ...
Обрабатываются триггеры для install-info (5.2.0.dfsg.1-6) ...
Настраивается пакет gnupg (1.4.18-7+deb8u1) ...
(Чтение базы данных ... на данный момент установлено 247219 файлов и каталогов.)
Подготовка к распаковке .../apt_1.0.9.8.3_amd64.deb ...
Распаковывается apt (1.0.9.8.3) на замену (1.0.9.8.2) ...
Обрабатываются триггеры для man-db (2.7.0.2-5) ...
Настраивается пакет apt (1.0.9.8.3) ...
Обрабатываются триггеры для libc-bin (2.19-18+deb8u4) ...
(Чтение базы данных ... на данный момент установлено 247219 файлов и каталогов.)
Подготовка к распаковке .../libudev1_215-17+deb8u4_amd64.deb ...
Деконфигурируется libudev1:i386 (215-17+deb8u3) ...
Распаковывается libudev1:amd64 (215-17+deb8u4) на замену (215-17+deb8u3) ...
Подготовка к распаковке .../libudev1_215-17+deb8u4_i386.deb ...
Распаковывается libudev1:i386 (215-17+deb8u4) на замену (215-17+deb8u3) ...
Подготовка к распаковке .../udev_215-17+deb8u4_amd64.deb ...
Распаковывается udev (215-17+deb8u4) на замену (215-17+deb8u3) ...
Обрабатываются триггеры для man-db (2.7.0.2-5) ...
Обрабатываются триггеры для systemd (215-17+deb8u3) ...
Настраивается пакет libudev1:amd64 (215-17+deb8u4) ...
Настраивается пакет libudev1:i386 (215-17+deb8u4) ...
Настраивается пакет udev (215-17+deb8u4) ...
addgroup: Группа «input» уже существует и является системной. Завершение работы.
update-initramfs: deferring update (trigger activated)
insserv: warning: script 'S80panasoniclpd-init' missing LSB tags and overrides
insserv: warning: script 'srv1cv82' missing LSB tags and overrides
insserv: warning: script 'panasoniclpd-init' missing LSB tags and overrides
insserv: There is a loop between service rc.local and mountnfs if started
insserv:  loop involving service mountnfs at depth 10
insserv:  loop involving service nfs-common at depth 9
insserv: There is a loop between service rc.local and urandom if started
insserv:  loop involving service urandom at depth 6
insserv:  loop involving service mountall at depth 5
insserv: There is a loop between service rc.local and mountall if started
insserv: There is a loop between service rc.local and mountnfs-bootclean if started
insserv:  loop involving service mountnfs-bootclean at depth 6
insserv: There is a loop between service rc.local and mountnfs if started
insserv:  loop involving service networking at depth 8
insserv:  loop involving service checkroot-bootclean at depth 5
insserv: There is a loop between service panasoniclpd-init and udev if started
insserv:  loop involving service udev at depth 1
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Max recursions depth 99 reached
insserv:  loop involving service bootlogs at depth 3
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv:  loop involving service kbd at depth 12
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: There is a loop at service panasoniclpd-init if started
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv:  loop involving service mountkernfs at depth 1
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv:  loop involving service mountall-bootclean at depth 7
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: ошибка при обработке пакета udev (--configure):
подпроцесс установлен сценарий post-installation возвратил код ошибки 1
Обрабатываются триггеры для libc-bin (2.19-18+deb8u4) ...
Обрабатываются триггеры для initramfs-tools (0.120) ...
update-initramfs: Generating /boot/initrd.img-3.16.0-4-amd64
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8402-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-1.fw for module r8169
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@debian-01:/home/term2# apt-get install samba
Чтение списков пакетов... Готово
Построение дерева зависимостей       
Чтение информации о состоянии... Готово
Будут установлены следующие дополнительные пакеты:
  attr libaio1 python-dnspython samba-dsdb-modules samba-vfs-modules tdb-tools
Предлагаемые пакеты:
  bind9 bind9utils ctdb ldb-tools ntp smbldap-tools winbind
НОВЫЕ пакеты, которые будут установлены:
  attr libaio1 python-dnspython samba samba-dsdb-modules samba-vfs-modules
  tdb-tools
обновлено 0, установлено 7 новых пакетов, для удаления отмечено 0 пакетов, и 188 пакетов не обновлено.
не установлено до конца или удалено 11 пакетов.
Необходимо скачать 1 836 kБ архивов.
После данной операции, объём занятого дискового пространства возрастёт на 14,5 MB.
Хотите продолжить? [Д/н] y
Получено:1 http://mirror.yandex.ru/debian/ jessie/main libaio1 amd64 0.3.110-1 [9 312 B]
Получено:2 http://security.debian.org/ jessie/updates/main samba-dsdb-modules amd64 2:4.2.10+dfsg-0+deb8u3 [306 kB]
Получено:3 http://mirror.yandex.ru/debian/ jessie/main python-dnspython all 1.12.0-1 [101 kB]
Получено:4 http://mirror.yandex.ru/debian/ jessie/main attr amd64 1:2.4.47-2 [42,8 kB]
Получено:5 http://security.debian.org/ jessie/updates/main tdb-tools amd64 1.3.6-0+deb8u1 [26,3 kB]
Получено:6 http://security.debian.org/ jessie/updates/main samba amd64 2:4.2.10+dfsg-0+deb8u3 [1 024 kB]
Получено:7 http://security.debian.org/ jessie/updates/main samba-vfs-modules amd64 2:4.2.10+dfsg-0+deb8u3 [327 kB]
Получено 1 836 kБ за 2с (698 kБ/c)         
Настраивается пакет udev (215-17+deb8u4) ...
addgroup: Группа «input» уже существует и является системной. Завершение работы.
update-initramfs: deferring update (trigger activated)
insserv: warning: script 'S80panasoniclpd-init' missing LSB tags and overrides
insserv: warning: script 'srv1cv82' missing LSB tags and overrides
insserv: warning: script 'panasoniclpd-init' missing LSB tags and overrides
insserv: There is a loop between service rc.local and mountnfs if started
insserv:  loop involving service mountnfs at depth 10
insserv:  loop involving service nfs-common at depth 9
insserv: There is a loop between service rc.local and urandom if started
insserv:  loop involving service urandom at depth 6
insserv:  loop involving service mountall at depth 5
insserv: There is a loop between service rc.local and mountall if started
insserv: There is a loop between service rc.local and mountnfs-bootclean if started
insserv:  loop involving service mountnfs-bootclean at depth 6
insserv: There is a loop between service rc.local and mountnfs if started
insserv:  loop involving service networking at depth 8
insserv:  loop involving service checkroot-bootclean at depth 5
insserv: There is a loop between service panasoniclpd-init and udev if started
insserv:  loop involving service udev at depth 1
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Max recursions depth 99 reached
insserv:  loop involving service bootlogs at depth 3
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv:  loop involving service kbd at depth 12
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: There is a loop at service panasoniclpd-init if started
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv:  loop involving service mountkernfs at depth 1
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv:  loop involving service mountall-bootclean at depth 7
insserv: Starting panasoniclpd-init depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: ошибка при обработке пакета udev (--configure):
подпроцесс установлен сценарий post-installation возвратил код ошибки 1
Обрабатываются триггеры для initramfs-tools (0.120) ...
update-initramfs: Generating /boot/initrd.img-3.16.0-4-amd64
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8402-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-1.fw for module r8169
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@debian-01:/home/term2#

После этого… пожоже вообще ничего не ставиться…..

Что бы я не ставил, ругается на пакет udev и все….. блин это печаль….

Теперь севрер сам не видит сетевые ресурсы

Модераторы: Warderer, Модераторы разделов

 Всем привет. Пытаюсь настроить сервер на основе Debian, и столкнулся с проблемой при настройке <Samba> выходит ошибка, < E: Sub-process /usr/bin/dpkg returned an error code (1)> вижу что неудолетворенные зависимости

ergei@debian:~$ sudo apt-get install -f

Мы полагаем, что ваш системный администратор изложил вам основы
безопасности. Как правило, всё сводится к трём следующим правилам:

    №1) Уважайте частную жизнь других.
    №2) Думайте, прежде что-то вводить.
    №3) С большой властью приходит большая ответственность.

[sudo] пароль для cergei:
sudo: /var/lib/sudo/lectured is group writable
Чтение списков пакетов... Готово
Построение дерева зависимостей       
Чтение информации о состоянии... Готово
Обновлено 0 пакетов, установлено 0 новых пакетов, для удаления отмечено 0 пакетов, и 469 пакетов не обновлено.
Установлено или удалено не до конца 2 пакетов.
После данной операции объём занятого дискового пространства возрастёт на 0 B.
Настраивается пакет samba-common-bin (2:4.11.5+dfsg-1+b1) ...
Checking smb.conf with testparm
Load smb config files from /etc/samba/smb.conf
Error loading services.
dpkg: ошибка при обработке пакета samba-common-bin (--configure):
installed samba-common-bin package post-installation script subprocess returned error exit status 1
dpkg: зависимости пакетов не позволяют настроить пакет samba:
samba зависит от samba-common-bin (= 2:4.11.5+dfsg-1+b1), однако:
  Пакет samba-common-bin пока не настроен.

dpkg: ошибка при обработке пакета samba (--csudo apt-get update --fix-missing
sudo apt-get install -fonfigure):
проблемы зависимостей — оставляем не настроенным
При обработке следующих пакетов произошли ошибки:
samba-common-bin
samba
E: Sub-process /usr/bin/dpkg returned an error code (1)

и пытался все это исправить осноываясь на советах из интернета, полностью удалял весь пакет <samba> используя команды:

sudo apt-get update --fix-missing
sudo apt-get install -f не помогло. Затем второй подход

sudo dpkg --configure -a
sudo apt-get clean
sudo apt-get update Опять мимо, ну и затем

sudo apt-get remove  sudo dpkg --remove --force-remove-reinstreq samba
sudo apt-get clean
sudo apt-get update
и заново устаналиаю пакет <samba> а потом все рано при обновлении пакетов выходит что ,<samba> и <samba-common-bin> с ошибкой как видно в выводе терминала.Чувствую что где то накосячил а вот где и как исправить не вникну. Вот ниже предсталяю данные системы на которой это все и разворачивается :

an:~$ uname -a
Linux debian 5.2.9-kirkwood-tld-1 #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 armv5tel GNU/Linux
cergei@debian:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux bullseye/sid
Release: stable-updates
Codename: sid
cergei@debian:~$ cat /etc/apt/sources.list
deb http://deb.debian.org/debian buster main
deb-src http://deb.debian.org/debian buster main

deb http://deb.debian.org/debian-security/ buster/updates main
deb-src http://deb.debian.org/debian-security/ buster/updates main

deb http://deb.debian.org/debian buster-updates main
deb-src http://deb.debian.org/debian buster-updates main
deb http://ftp.ru.debian.org/debian sid main
cergei@debian:~$ ls /etc/apt/sources.list.d
ls: невозможно получить доступ к '/etc/apt/sources.list.d': Нет такого файла или каталога

Любые советы будут приняты с благодарностью.

_{Привёл пост в более удобночитаемый вид. Ogost}

package samba-common-bin 2:4.11.6+dfsg-0ubuntu1.3 failed to install/upgrade: installed samba-common-bin package post-installation script subprocess returned error exit status 1

Affects	Status	Importance	Assigned to	Milestone
samba (Debian)

Bug Description

I was able to workaround the installation failure by using systemd-tmpfiles to create the missing directory:

$ sudo dpkg —configure -a
Setting up samba-common-bin (2:4.11. 6+dfsg- 0ubuntu1. 3) .
Checking smb.conf with testparm
Load smb config files from /etc/samba/smb.conf
Loaded services file OK.
ERROR: lock directory /run/samba does not exist

ERROR: pid directory /run/samba does not exist

WARNING: some services use vfs_fruit, others don’t. Mounting them in conjunction on OS X clients results in undefined behaviour.

Server role: ROLE_STANDALONE

dpkg: error processing package samba-common-bin (—configure):
installed samba-common-bin package post-installation script subprocess returned error exit status 1
dpkg: dependency problems prevent configuration of samba:
samba depends on samba-common-bin (= 2:4.11. 6+dfsg- 0ubuntu1. 3); however:
Package samba-common-bin is not configured yet.

dpkg: error processing package samba (—configure):
dependency problems — leaving unconfigured
Errors were encountered while processing:
samba-common-bin
samba
+bryan@bryanNAS:

$ sudo /bin/systemd- tmpfiles —create /usr/lib/ tmpfiles. d/samba. conf
+bryan@bryanNAS:

$ sudo dpkg —configure -a
Setting up samba-common-bin (2:4.11. 6+dfsg- 0ubuntu1. 3) .
Checking smb.conf with testparm
Load smb config files from /etc/samba/smb.conf
Loaded services file OK.
WARNING: some services use vfs_fruit, others don’t. Mounting them in conjunction on OS X clients results in undefined behaviour.

Server role: ROLE_STANDALONE

Done
Setting up samba (2:4.11. 6+dfsg- 0ubuntu1. 3) .
Installing new version of config file /etc/init.d/nmbd .
Installing new version of config file /etc/init. d/samba- ad-dc .
Installing new version of config file /etc/init.d/smbd .
Installing new version of config file /etc/logrotate. d/samba .
Samba is not being run as an AD Domain Controller: Masking samba-ad-dc.service
Please ignore the following error about deb-systemd-helper not finding those services.
(samba- ad-dc.service already masked)
Removing obsolete conffile /etc/init.d/samba .
Removing obsolete conffile /etc/init/nmbd.conf .
Removing obsolete conffile /etc/init/ reload- smbd.conf .
Removing obsolete conffile /etc/init/ samba-ad- dc.conf .
Removing obsolete conffile /etc/init/smbd.conf .
Failed to preset unit: Unit file /etc/systemd/ system/ samba-ad- dc.service is masked.
/usr/bin/ deb-systemd- helper: error: systemctl preset failed on samba-ad- dc.service: No such file or directory
samba-ad-dc.service is a disabled or a static unit not running, not starting it.
Processing triggers for libc-bin (2.31-0ubuntu9) .
Processing triggers for systemd (245.4-4ubuntu3.1) .
Processing triggers for ureadahead (0.100.0-21) .

ProblemType: Package
DistroRelease: Ubuntu 20.04
Package: samba-common-bin 2:4.11. 6+dfsg- 0ubuntu1. 3
ProcVersionSign ature: Ubuntu 5.4.0-40.44-generic 5.4.44
Uname: Linux 5.4.0-40-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.3
Architecture: amd64
CasperMD5CheckR esult: skip
Date: Thu Jul 2 17:08:23 2020
ErrorMessage: installed samba-common-bin package post-installation script subprocess returned error exit status 1
InstallationDate: Installed on 2017-08-20 (1047 days ago)
InstallationMedia: Ubuntu 17.04 «Zesty Zapus» — Release amd64 (20170412)
OtherFailedConnect: Yes
Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 3.8.2-0ubuntu2
PythonDetails: /usr/bin/python2.7, Python 2.7.18rc1, python-is-python2, 2.7.17-4
RelatedPackageV ersions:
dpkg 1.19.7ubuntu3
apt 2.0.2ubuntu0.1
SambaServerRegr ession: Yes
SmbConfIncluded: No
SourcePackage: samba
TestparmExitCode: 0
Title: package samba-common-bin 2:4.11. 6+dfsg- 0ubuntu1. 3 failed to install/upgrade: installed samba-common-bin package post-installation script subprocess returned error exit status 1
UpgradeStatus: Upgraded to focal on 2020-07-02 (0 days ago)

Источник

Linux Mint Forums

Welcome to the Linux Mint forums!

Samba will not install on Mint 20 Ulyana

Samba will not install on Mint 20 Ulyana

Post by imadley » Mon Oct 26, 2020 11:34 am

I am new to Linux but need to be able to connect my work laptop (windows 10 pro) to my desktop
I am trying to get Samba to run but it will not even install from either the Software Manager or Terminal.
The follow error codes are being generated
«Error loading services.
dpkg: error processing package samba-common-bin (—configure):
installed samba-common-bin package post-installation script subprocess returned error exit status 1
dpkg: dependency problems prevent configuration of samba:
samba depends on samba-common-bin (= 2:4.11.6+dfsg-0ubuntu1.5); however:
Package samba-common-bin is not configured yet.

dpkg: error processing package samba (—configure):
dependency problems — leaving unconfigured
Processing triggers for ufw (0.36-6) .
Processing triggers for systemd (245.4-4ubuntu3.2) .
Processing triggers for man-db (2.9.1-1) .
Processing triggers for libc-bin (2.31-0ubuntu9.1) .
Errors were encountered while processing:
samba-common-bin
samba
Setting up samba-common-bin (2:4.11.6+dfsg-0ubuntu1.5) .
Checking smb.conf with testparm
Load smb config files from /etc/samba/smb.conf
Error loading services.
dpkg: error processing package samba-common-bin (—configure):
installed samba-common-bin package post-installation script subprocess returned error exit status 1
dpkg: dependency problems prevent configuration of samba:
samba depends on samba-common-bin (= 2:4.11.6+dfsg-0ubuntu1.5); however:
Package samba-common-bin is not configured yet.

dpkg: error processing package samba (—configure):
dependency problems — leaving unconfigured»

Any suggestions as how to solve this?

Re: Samba will not install on Mint 20 Ulyana

Post by Lord Boltar » Mon Oct 26, 2020 5:42 pm

You do not have all the prerequisites installed you are missing samba-common-bin

samba is in the repositories

IF your problem has been solved, please edit your original post and add [SOLVED] to the beginning of the Subject Line. It helps other members

The only way for evil to prosper is for good men to do nothing

Re: Samba will not install on Mint 20 Ulyana

Post by imadley » Tue Oct 27, 2020 1:34 pm

This hasn’t worked
Samba-common-bin still fails

The error reported is

» dpkg: error processing package samba (—configure):
dependency problems — leaving unconfigured
Errors were encountered while processing:
samba-common-bin
samba
E: Sub-process /usr/bin/dpkg returned error code (1)»

Re: Samba will not install on Mint 20 Ulyana

Post by Lord Boltar » Tue Oct 27, 2020 9:14 pm

IF your problem has been solved, please edit your original post and add [SOLVED] to the beginning of the Subject Line. It helps other members

The only way for evil to prosper is for good men to do nothing

Re: Samba will not install on Mint 20 Ulyana

Post by Kadaitcha Man » Tue Oct 27, 2020 9:33 pm

Источник

Installed samba common bin package post installation script subprocess returned error exit status 1

I have a RPi4 — 4GB

I can’t get samba working on it which is normally very easy.

Here are some details

• It’s Buster lite
• It’s a fresh, updated install
• All I have installed in OpenJDK 8
• I’ve gone through the install — always followed this guy’s blog
• install is simply sudo apt-get install samba samba-common-bin
• All the above is done logged in as root.

I get the following in while installing

After that, I’m stuck

Any help appreciated.

Re: RPi 4 — Samba installed but service won’t start

I have a RPi4 — 4GB

I can’t get samba working on it which is normally very easy.

Here are some details

• It’s Buster lite
• It’s a fresh, updated install
• All I have installed in OpenJDK 8
• I’ve gone through the install — always followed this guy’s blog
• install is simply sudo apt-get install samba samba-common-bin
• All the above is done logged in as root.

I get the following in while installing

After that, I’m stuck

Any help appreciated.

Re: RPi 4 — Samba installed but service won’t start

Re: RPi 4 — Samba installed but service won’t start

OpenJDK8 is not in the Buster repositories, it is OpenJDK11

It’s installed though —

Re: RPi 4 — Samba installed but service won’t start

Re: RPi 4 — Samba installed but service won’t start

true, it does have that in but you can install java8.

Still struggling to get samba working.

Re: RPi 4 — Samba installed but service won’t start

Do you have samba installed and working?

Re: RPi 4 — Samba installed but service won’t start

Are they actually running ?
Try restarting ‘smbd’ & ‘nmbd’

As for the ‘blog’ you followed, you might just as well not create a Samba user and use this share:

It will work just like the one in the blog, but with less lines.
You should also check that ‘map to guest = bad user’ is set in [global]

If ‘smbd’ & ‘nmbd’ are running, you should be able to connect to the share, but you will probably have to navigate to it, seeing as SMBv1 is now turned off.

Re: RPi 4 — Samba installed but service won’t start

well, yes and no.

So, it turns out it was working the whole time. I did not bother checking through windows if it is actually sharing them. When I did I face-palmed.

On my RPi3B+ I see the following

As you can see there is a service called samba and smdb. On the RPi4 there is only smbd.

I’m sure I am not the only one who is using the previously mentioned tutorial so hopefully this thread will help others.

Источник

Добрейшего всем дня или ночи! Завёл kali на планшете, столкнулся с данной проблемой.. при апдейте. Хелб!

Переустанавливал систему, проблема осталась актуальной

Настраивается пакет samba-common-bin (2:4.8.2+dfsg-1) … Checking smb.conf ERROR: Unable to load default file dpkg: ошибка при обработке пакета samba-common-bin (—configure): installed samba-common-bin package post-installation script subprocess returned error exit status 255 dpkg: зависимости пакетов не позволяют настроить пакет passing-the-hash: passing-the-hash зависит от samba-common-bin (>= 2:4), однако: Пакет samba-common-bin пока не настроен.

dpkg: ошибка при обработке пакета passing-the-hash (—configure): проблемы зависимостей — оставляем не настроенным dpkg: зависимости пакетов не позволяют настроить пакет kali-linux-full: kali-linux-full зависит от passing-the-hash, однако: Пакет passing-the-hash пока не настроен.

dpkg: ошибка при обработке пакета kali-linux-full (—configure): проблемы зависимостей — оставляем не настроенным dpkg: зависимости пакетов не позволяют настроить пакет samba: samba зависит от samba-common-bin (= 2:4.8.2+dfsg-1), однако: Пакет samba-common-bin пока не настроен.

dpkg: ошибка при обработке пакета samba (—configure): проблемы зависимостей — оставляем не настроенным dpkg: зависимости пакетов не позволяют настроить пакет enum4linux: enum4linux зависит от samba, однако: Пакет samba пока не настроен.

dpkg: ошибка при обработке пакета enum4linux (—configure): проблемы зависимостей — оставляем не настроенным dpkg: зависимости пакетов не позволяют настроить пакет kali-linux: kali-linux зависит от samba, однако: Пакет samba пока не настроен.

dpkg: ошибка при обработке пакета kali-linux (—configure): проблемы зависимостей — оставляем не настроенным При обработке следующих пакетов произошли ошибки: samba-common-bin passing-the-hash kali-linux-full samba enum4linux kali-linux

Источник

I was able to workaround the installation failure by using systemd-tmpfiles to create the missing directory:

+bryan@bryanNAS:~$ sudo dpkg —configure -a
Setting up samba-common-bin (2:4.11.6+dfsg-0ubuntu1.3) …
Checking smb.conf with testparm
Load smb config files from /etc/samba/smb.conf
Loaded services file OK.
ERROR: lock directory /run/samba does not exist

ERROR: pid directory /run/samba does not exist

WARNING: some services use vfs_fruit, others don’t. Mounting them in conjunction on OS X clients results in undefined behaviour.

Server role: ROLE_STANDALONE

dpkg: error processing package samba-common-bin (—configure):
 installed samba-common-bin package post-installation script subprocess returned error exit status 1
dpkg: dependency problems prevent configuration of samba:
 samba depends on samba-common-bin (= 2:4.11.6+dfsg-0ubuntu1.3); however:
  Package samba-common-bin is not configured yet.

dpkg: error processing package samba (—configure):
 dependency problems — leaving unconfigured
Errors were encountered while processing:
 samba-common-bin
 samba
+bryan@bryanNAS:~$ sudo /bin/systemd-tmpfiles —create /usr/lib/tmpfiles.d/samba.conf
+bryan@bryanNAS:~$ sudo dpkg —configure -a
Setting up samba-common-bin (2:4.11.6+dfsg-0ubuntu1.3) …
Checking smb.conf with testparm
Load smb config files from /etc/samba/smb.conf
Loaded services file OK.
WARNING: some services use vfs_fruit, others don’t. Mounting them in conjunction on OS X clients results in undefined behaviour.

Server role: ROLE_STANDALONE

Done
Setting up samba (2:4.11.6+dfsg-0ubuntu1.3) …
Installing new version of config file /etc/init.d/nmbd …
Installing new version of config file /etc/init.d/samba-ad-dc …
Installing new version of config file /etc/init.d/smbd …
Installing new version of config file /etc/logrotate.d/samba …
Samba is not being run as an AD Domain Controller: Masking samba-ad-dc.service
Please ignore the following error about deb-systemd-helper not finding those services.
(samba-ad-dc.service already masked)
Removing obsolete conffile /etc/init.d/samba …
Removing obsolete conffile /etc/init/nmbd.conf …
Removing obsolete conffile /etc/init/reload-smbd.conf …
Removing obsolete conffile /etc/init/samba-ad-dc.conf …
Removing obsolete conffile /etc/init/smbd.conf …
Failed to preset unit: Unit file /etc/systemd/system/samba-ad-dc.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on samba-ad-dc.service: No such file or directory
samba-ad-dc.service is a disabled or a static unit not running, not starting it.
Processing triggers for libc-bin (2.31-0ubuntu9) …
Processing triggers for systemd (245.4-4ubuntu3.1) …
Processing triggers for ureadahead (0.100.0-21) …

ProblemType: Package
DistroRelease: Ubuntu 20.04
Package: samba-common-bin 2:4.11.6+dfsg-0ubuntu1.3
ProcVersionSignature: Ubuntu 5.4.0-40.44-generic 5.4.44
Uname: Linux 5.4.0-40-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.3
Architecture: amd64
CasperMD5CheckResult: skip
Date: Thu Jul 2 17:08:23 2020
ErrorMessage: installed samba-common-bin package post-installation script subprocess returned error exit status 1
InstallationDate: Installed on 2017-08-20 (1047 days ago)
InstallationMedia: Ubuntu 17.04 «Zesty Zapus» — Release amd64 (20170412)
OtherFailedConnect: Yes
Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 3.8.2-0ubuntu2
PythonDetails: /usr/bin/python2.7, Python 2.7.18rc1, python-is-python2, 2.7.17-4
RelatedPackageVersions:
 dpkg 1.19.7ubuntu3
 apt 2.0.2ubuntu0.1
SambaServerRegression: Yes
SmbConfIncluded: No
SourcePackage: samba
TestparmExitCode: 0
Title: package samba-common-bin 2:4.11.6+dfsg-0ubuntu1.3 failed to install/upgrade: installed samba-common-bin package post-installation script subprocess returned error exit status 1
UpgradeStatus: Upgraded to focal on 2020-07-02 (0 days ago)