Нашли ошибку на странице?
Выделите её мышкой и нажмите
Ctrl + Enter
Задать вопрос
| Раздел: CronosPRO | Дата редакции: 23.06.2014 | id статьи: 1341 |
Пользователи сетевой версии «CronosPRO» при запуске программы видят
сообщение, пердставленное на рис. 1.
Рис. 1. Сообщение «File Corrupted! Please Run a viruse check» при запуске «CronosPRO»
Такое сообщение может появиться, если пользователи работали с программой
через файл cronos.exe — назовём его старый.
Администратор заменил файл на новый cronos.exe при этом пользователи при логине продолжают работать
со старым файлом cronos.exe.
Необходимо, чтобы все пользователи вышли из программы «CronosPRO». После того,
как Администратор убедился, что ни один из пользователей не «держит» файл на сервере,
пользователи могут запустить программу и продолжить работу.
Наилучшим решением будет перезагрузка сервера.
Recommended Posts
So this happens when ever I export any project. I’ve tried with my anti-virus off, but it still doesn’t work.
Share this post
Link to post
Share on other sites
The problem is in the folder name. Notice how part of the folder name in the screenshot shows «?????» instead of letters? Change that to something in English and it will work.
Share this post
Link to post
Share on other sites
This topic is now closed to further replies.
-
Recently Browsing
0 members
No registered users viewing this page.
Форум
Вопросы и ответы по «ClubTimer»
Ошибка!
Здраствуйте у меня такая ошибка
File corrupted!
Please run a virus-check
the reinstall the application
и после переустановки винта тоже самая
Гость
2
0
Ответы на вопрос
(1)
0
0
12.03.2014 12:51
и после переустановки винта тоже самая
На этом моменте интересуют подробности.
Вопрос и ответы были вам полезны?
Да
Нет
-
#1
Software’s been running perfect for quite a while.
I rebooted my PC and during start up the following displayed;
«File Corrupted. Please run a virus check and reinstall AnyDVD.»
Running v6.7.6.0
Virus scan didn’t find anything.
Uninstalled keeping registration info — re-installed — same problem.
Downloaded fresh 6.7.6.0 — installed — same problem.
I did see any AnyDVD.chk file in program data folder. OS said it was a recovered file fragment time stamped early this morning.
Appreciate any help.
-
#2
Software’s been running perfect for quite a while.
I rebooted my PC and during start up the following displayed;«File Corrupted. Please run a virus check and reinstall AnyDVD.»
Running v6.7.6.0
Virus scan didn’t find anything.
Uninstalled keeping registration info — re-installed — same problem.
Downloaded fresh 6.7.6.0 — installed — same problem.I did see any AnyDVD.chk file in program data folder. OS said it was a recovered file fragment time stamped early this morning.
Appreciate any help.
Sounds like a corrupted download. Uninstall AnyDVD, clear browser cache/history, reboot. Download AnyDVD from Slysoft, install, reboot, register key, reboot.
-
#3
Thanks. Did that. Install appeared to go fine. Told me I’d need to reboot. Finished install, rebooted. Got the same file corrupt message. Registered anyway — registry ok. Fired up AnyDVD HD — same problem.
Any logs I can look at?
Thanks.
Peer
Redfox Development Team
-
#4
Software’s been running perfect for quite a while.
I rebooted my PC and during start up the following displayed;«File Corrupted. Please run a virus check and reinstall AnyDVD.»
Then the most important question is: what did you install recently. AnyDVD displays that message, whenever another programm changes code inside AnyDVD — at runtime or on disc.
Post an AnyDVD log file, please («AnyDVD System Information» in the AnyDVD program group, if AnyDVD itself doesn’t run long enough to right-click and create a log file).
I did see any AnyDVD.chk file in program data folder. OS said it was a recovered file fragment time stamped early this morning.
It’s not — it’s a required file, leave it there.
Last edited: Jan 5, 2011
-
#5
Still get file corrupt error on boot.
After PC’s finished booting, if I right click, run as administrator on the AnyDVDtray.exe, the program runs and the icon’s in the tray. No error message.
Insert a DVD, reads it per usual.
Reboot and file corrupt message displays, app not running.
Looked at Startup — should the AnyDVDtray.exe be in the startup folder?
Appreciate any help.
Running Windows 7 Home Premium. Thanks
James
Redfox Development Team
-
#6
Still get file corrupt error on boot.
After PC’s finished booting, if I right click, run as administrator on the AnyDVDtray.exe, the program runs and the icon’s in the tray. No error message.
Insert a DVD, reads it per usual.
Reboot and file corrupt message displays, app not running.
Looked at Startup — should the AnyDVDtray.exe be in the startup folder?
Appreciate any help.
Running Windows 7 Home Premium. Thanks
No logfile — no help. Sorry.
-
#7
No logfile — no help. Sorry.
So you want the sysinfo.log? I see a zip file I created that was from an empty drive. Unzipped it and there are 4 files. Added the .zip file.
-
AnyDVD_6.7.6.0_Info_G_EMPTY_DRIVE.zip
23.3 KB
· Views: 5
Last edited: Jan 7, 2011
Peer
Redfox Development Team
-
#8
So you want the sysinfo.log? I see a zip file I created that was from an empty drive. Unzipped it and there are 4 files. Added the .zip file.
You have Airfoil running.
Add AnyDVDTray.exe to the exclusion list, then it’s ok.
-
#9
Done. Works as designed. This thread’s solved. Thanks.
-
#1
Many members in this forum have encountered this horrible error:
«File corrupted! Please run a virus check, then reinstall the application.»
This is mostly by users of VX Ace and their games, and causing these to
make it unplayable or infected in release. [Just like what happened to my
game HGD2]
The reasons are:
-Downloading or installing infected [cracked or not] games (not related to RPG Maker)
-Infected apps
-Some virus are replicable and impossible to wore off or disinfected
If you need to stop these, there is still hope! I have the solution.
Method 1 — Replace RGSS300.dll:
1. Search on Google «RGSS300.dll»
2. You can see one of the websites to download dll files. [Click Link]
3. Click download in the ‘available version’ tab. Not the other ones!
4. The downloaded file must be in zip file.
5. Extract the contents on the zip file, but do not delete the zip, this is serve as a backup.
6. Copy the RGSS300.dll to the RPGVXAce directory and your game of your choice.
7. Open the RPG Maker VX Ace executable, and your game is going to be functional!
8. When your finished or encrypted game have the same issue, do this method responsively.
Method 2 — Kill the virus:
1: Download only one of these antimalware programs:
-System Center Endpoint Protection
-Malwayebytes Antimalware
-any antivirus programs which can kill malware
2. Install the program
3. Go to your game folder or RPGVXAce folder and scan the folder.
4. If it detects some malware, it is recommended to remove the malware.
5. Waiting for process and the game was free from malware.
If none of this solved, there is only one option and it is effective. This final step is a last resort.
1. Download the Kaspersky Antivirus here. Remember, Total Security is totally effective to fix infected files. (note: you can download only trial version)
2. Install and be patient. It takes a lot of time to install.
3. If it’s finished, the antivirus will scan entire system memory, include your RPG Maker games.
4. If you don’t want to scan all files, you can pause the scanning process.
5. Locate RPG Maker programs and their games. Right click any item and click ‘Scan for Viruses’. Be patient to scan these.
6. If it’s done scanning, your games are free from viruses.
7. [Optional] Upload your completed games to VirusTotal for further results.
Note: If you have any difficulties, feel free to comment below!
Last edited: Sep 19, 2018
-
#3
And why not simply redownloading the original Ace as purchased here, because it contains the intact DLL? No need to search on the web for that.
<<Andar
Thanks for the additional info about that!
-LeonardPlaysMC