Ошибка открытия сетевого адаптера tusb3410

No boot device

The message «No boot device — insert boot disk and press any key» came after I partitioned my GB mac/window.

I understand that with option I can boot into OS X, but I want to fix my installation of bootcamp.

I use a sandisk usb 2.0 key.

Help, please!

Your signature says MBP 2011. Is this correct? If so, 2011 Mbps needing a physical DVD into the optical drive built-in (not external) to install Windows. You can not directly install W10 on 2011 Mbps.

El Capitan «Don’t Update» no boot device

Hello

I’ve updated updated my MBP 2011 end of El Capitan, and now I’m unable to start Windows. The Bootcamp partition is always visible in disk utility, but if I try to start it I get a response of «no boot device.»

Here is my disk configuration:

You can use Re: [help] can’t start Windows (8.1) after partition resizing as a reference and rebuild your MBR using GPT Fdisk?

GPT Fdisk is available at https://sourceforge.net/projects/gptfdisk/ .

Boot Camp «no boot device.»

My bootcamp partition does not appear in start mode of drive, when starting all holding the key down option .

Although it appears in disk utility and boot disk.

When by selecting it from the startup disk, it starts and I get the «error no boot device.»

I tried some other questions similar to this, and I have seen some using gdisk, but I’m not familiar with this package (but I have not installed) and do not want to go to juggle with the MBR or GPT without proper guidance.

I have attached photos of the MBR and diskutil list in case this is useful.

Gdisk, please after the release of the ‘p’ (rint) order. All third-party tools used to / resizing of Windows partition?

Boot camp is no boot device

Hello community,

I used to read every forum/discuss before posting, so it’s the first time here.

My config:

Mac pro 3.1 2008 / Mac osx 10.11 / Boot camp 5 / windows 7 update to windows 10

I have installed since a year now Bootcamp, windows told me I was able to update windows 10, and they were little good cause I managed to update without any problem, I used windows 10 for a month and have never encounter the difficulties in moving an OS x and windows.

But yesterday, I needed to format my disk HARD school wich has been used for time machine. Time machine has been disabled for months (because it was full and keeping saying that it was impossible to save) and I needed a free space to use with Windows 10.

I deleted and format FAT32, this secondary hard drive, so I could not boot into windows, keep showed a black screen with flashing white guest and not any something key.

If I go to select a restart from a drive, I can choose OS x or bootcamp.

I can see my partition boot camp on OS X with all data still there, but when I push the button option at the beginning, I have only 2 choices: — Mac OS X — or — restore 10.11 — I don’t see my windows startup.

I tried to download parallels desktop to see if he is able to start my training camp. But parallel shows me «no boot device.»

Can someone help me?

Thank you.

Here is some information on installed drive:

diskutil list

/ dev/disk0 (internal, physical):

#: NAME SIZE TYPE IDENTIFIER

0: GUID_partition_scheme * GB 500,1 disk0

1: disk0s1 EFI EFI 209.7 MB

2: Apple_HFS Macintosh HD 350,2 GB disk0s2

3: disk0s3 Apple_Boot Recovery 650.0 MB HD

4: Microsoft database BOOTCAMP 149,0 GB disk0s4

/ dev/disk1 (internal, physical):

#: NAME SIZE TYPE IDENTIFIER

0: GUID_partition_scheme * GB 160.0 disk1

1: EFI EFI 209.7 MB disk1s1

2: Microsoft database disc2 159.8 GB disk1s2

/ dev/disk2 (external, physical):

#: NAME SIZE TYPE IDENTIFIER

0: FDisk_partition_scheme * 4.0 GB disk2

1: DOS_FAT_32 DISK_IMG 4. 0 GB disk2s1

________________________________________________________________________________ ___

sudo fdisk/dev/disk0

Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

Signature: 0xAA55

From end

#: cyl hd s — cyl hd s id [Start — size]

————————————————————————

1: EA 1023 254 63 — 1023 254 63 [1-409639] < unknown ID >

2: AF 1023 254 63 — 1023 254 63 [409640-684078336] HFS +.

3: AB 1023 254 63 — 1023 254 63 Boot Darwin [684487976-1269536]

04:07 1023 254 63-1023 254 63 [685758464-291014656] HPFS/QNX / TO THE

________________________________________________________________________________ __

sudo TPG — v — r see the/dev/disk0

See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

See the TPG: / dev/disk0: MBR suspicious to sector 0

start index size summary

0 1 MBR

1 1 Pri GPT header

2 32 table GPT Pri

34 6

40 409600 1 part TPG — C12A7328-F81F-11D2-BA4B-00A0C93EC93B

409640 684078336 2 part TPG — 48465300-0000-11AA-AA11-00306543ECAC

684487976 1269536 3 part TPG — 426F6F74-0000-11AA-AA11-00306543ECAC

952 685757512

685758464 291014656 4 part TPG — EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

976773120 15

976773135 32 table dry GPT

976773167 1 dry GPT header

Please remove all drives (internal and external) except the Windows disk after having properly stop your MP.

A. we need to disable SIP.

1. boot in local restoration (command-R).

2. start utility-> Terminal.

3. type csrutil disable in the Terminal, and then press enter/return.

4. type csrutil State.

5 start normally, then type csrutil status to confirm that all of the individual entries are still disabled.

B. fix the Windows MBR Boot-ability entry. Please ignore the i386 MBR error message, but not others

sudo fdisk e/dev/disk0

p

setpid 4

07

Pavilion 4

p

w

There

Restart and test.

Bootcamp — no boot device

Hello

First of all, sorry for my bad English is not my mother tongue.

I have a MacBook Pro (late 2011, i7 2, 2 GHz, 320GB HD, 4 GB RAM, Radeon HD 6750 M 512 MB, OS X El Capitan) and I tried to install Windows via Bootcamp 8.1. I changed the info.plist file because my Macbook still have superdrive and could not install bootcamp with a USB key. At this point, no problem. But when the reboot from OS X, appears a message saying: «No boot device — insert boot disk and press any key», that I was wrong? How can I install windows? Now whenever I turn on my Macbook, I must maintain option and select Macintosh HD thanks.

You must download the W8.1 ISO to your Mac from https://www.microsoft.com/en-us/software-download/home and burn it to a physical DVD. Your Mac 2011 is not compatible USB start correctly. 2012-2014 mac supports USB installers. Change Info.pllist will also cause driver problems.

Select the boot device appears to casual throw &amp; computer freeze certain functions

HP Compaq Pavilion 64 bit, windows 7 Home premium

6 months ago replace hard drive with the drive hard seagate 1 TB 64-bit

Computer functions started random freezing of microsoft works, don’t access the start menu, task bar functions, classifications, etc. all random works poorly but still able to use count in browsing the web. I look at you tube for long periods seems to stimulate the problem. Computer being left pending. Computer freezes seems to disappear spontaneously during use or after sleep or restart.

Commissioning shows a blue square in the middle of the screen with:

Select the boot device

ST 1000 DM003-1 ER162

HP DVD — Ram GH40L

F4 amorçage using default

What boot device use.

Unplugged the hard drive and turned on pc and hp dvd — ram gh40l was only peripheral boot

Replaced the motherboard battery already.

I did the command line; sfc/scannow, HDD and motherboard diagnostics, repair of disks does not.

One alternative is to reinstall windows 7 with discs or install windows 10 as an alternative.

Hello @zoboomafoo,

Thank you for all the information!

What have been the results of physical tests?  If all the past, then it seems that you encounter problems with the operating system.  If the problem is actually related to the operating system, then by reinstalling Windows will help you solve it.  This should help to address issues with malware.  Upgrade to Windows 10 is an option, however, you don’t have full support of drivers.  I hope this helps.

Kind regards!

Satellite M50D-A-10W — error «reboot and select proper boot device.»

I have a Toshiba Satellite M50D-A-10W passing me all nuts «reboot and select proper boot device.»

This has happened before and it was solved by ctr-alt-del and F12 to get into the BIOS where the date went back to some time in 2010 — after put so far and to change the boot device, everything worked fine… until the next day.

Now I get the screen «reboot and select good boot device ‘, but the F12 key does not; I also tried F2… the message keep multiplying, no BIOS…
Help, please!

In some cases the BIOS is only accessible by pressing the button turn off force on the lower side of the unit.

Info:
http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

After that you were able to start the windows system, its highly recommended to update the BIOS as BIOS update would solve this annoying problem.

Info:
http://APS2.toshiba-tro.de/KB0/TSB4903N50000R01.htm

Satellite C650D problem hard drive — no boot device

No boot device, please insert the boot disk and press any key any… and yet once again and again.

It is not a problem to make a recovery, but it is each to come a few days again.picture freezes, everything stops, and the black window is forthcoming with this info…

And of course support Toshiba does not Saturday… any solution for this weekend?

I fear you’re right m.

If you n t know how to find nearest provider for service Toshiba Toshiba support page visit — http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

Reboot and select good Boot Device problem — my PC does not start!

Hi all

Whenever I turn on my computer I get the message «Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key.

I checked the diagonistics material and these are the results:

Test CPU-

Hard drive: failure of the connection Test — Error Code: BIOHD1

Memory — past

I don’t think that the issue is a faulty connection. My reason to believe so because I think that I had a virus on my computer (I was not able to confirm) I tried to delete the last time I was able to use the computer. Then I turned off the computer to restart, but unfortunately, that’s when I got this error message.

I had this problem once before (about 3 years ago) and I was not able to solve this problem, so I just stopped using the PC. Then one day my Dad turned on the computer (a few months later) and it worked all of a sudden.

Anyone know what this problem is? How can I solve this problem?

Any help is greatly appreciated! Thank you very much for your time and effort!

Additional information:

It was originally a windows 7 PC, but I have upgraded to windows 10, which is the current operating system.

Product: HP p6620f

I managed to start my PC again.

I have unplugged all connections and left it that way for about 24 hours. Then I plugged everything back in and all of a sudden the PC worked again. I don’t know if it will last, but right now it works.

I’ll write another post if something changes.

NB200-10Z does not start — slect boot device message

Hello, sorry for my English, I’m Italian and I have him translated by the translator.
I am writing because I have a big problem.

My toshiba NB200-10Z has this break: I turn it on and I get the «Toshiba innovation leader» screen and bottom left shows «crazy (F2) Setup, press (F12) to the boot device selection menu…»

No matter what button I press him, and still nothing happens. I tried to replace diskbench hard ram, but nothing does not change.
I don’t know what to do.

I am very worried. Can you help me?

Thank you to tell me everything

Dino, Rimini Italy

Usually, the message appears because the laptop could not boot boot device…
In most cases the disk HARD is not found in BIOS due to the fault and therefore the laptop not found system.

Question: are you able to access the BIOS F2 key?
If so, the HARD drive is listed in the BIOS?

You can boot from another bootable media such as disk or a USB key?

HP Pavilion 15 t-n200: sometimes not found black screen boot device

Computer during the race will go sometimes to black screen and say «boot device not found», I am able to

correct the problem by power off, wait a few seconds back, computer power will start

Save as normal and work very well.  This happens maybe once a week. My fear is of course to some

time not to come back to the top. Are there corrective measures, should I try now? I have a hybrid

static hard drive (ST500LM000-1EJ162)…

.

Hello @jla11,

Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

I understand that you have a problem with the laptop to a black screen and tried to help you!  I see that you will get the error on the hard disk.

You might try to test the hard drive for the failure.  In this way, you can check if there are problems.  You can use the following to help:

Laptops HP — device not found Boot error or hard drive not detected

You should be able to skip to step 2.  Please post back with the results.

Please let me know if this information helps you solve the problem by marking this message as ‘accept as Solution’, this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

Have a great day!

Satellite L50D-B — no boot device — please reboot

Does anyone know what to do when you get only bios saying «no boot device — please reboot» during computer startup?

Enter your BIOS, make sure that UEFI is enabled, or if you are using a linux operating system allow inheritance.

Pavilion Notebook 15-p204na: not found boot device

I get the folowwing message:

Not found boot device

Please install an operating system on your hard drive

hard drive (3F0)

I did a restore default BIOS, but it did not work.

@Ram14: see is something in the linked thread help: ‘ Hard Disk — BootDevice (3F0) not found «error — HP Support Forum’s — 2443931

Not found boot device

My laptop won’t start. It is said the test of hard drive failure and the found boot device (3f0). I ran tests start, tests and test the hard disk without success. The computer is no longer under warranty. It is a HP mini.

You are the very welcome.

Please give me the model number full of your mini, so I can watch what size HARD drive you need to buy, if a recovery media is available for purchase and for me to be able to provide the link to the service manual.

Normally, removal and replacement of a hard drive are not too difficult relatively speaking.

I would say that almost everyone can do.  I don’t know that much about mini and how disassembly is required to get on the hard drive.

On mobile phones more regular sizes, it is very easy to remove and replace the HARD drive.