Ошибка mobile connect bus enumerate device

Huawei Mobile Connect — 3G modem failed to install Windows 7 on USB 3 port.

Huawei Mobile Connect — 3G modem failed to install Windows 7 on USB 3 port. I looked for the answers here and I can not find my problem even for questions answered with Dibcom TV Tunder device since I can’t find this device in my laptop. He is able to install and operate in another laptop running Windows XP. Been tried to uninstall and reinstall more than 5 times and he continues to meet with even has no message and I even downloaded the latest drivers from the local Web of ISP site. Helpdesk of mcafee and contacted microsoft, but they are not able to solve my problem.

Thank you.

Managed to solve by referring to the answer below posted by Rudolph_DT asked on thread

Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

Thank you.

Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I’ve updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

Thanx

[If this post was helpful, please click the button «Vote as helpful» (green triangle). If it can help solve your problem, click on the button ‘Propose as answer’ or ‘mark as answer ‘. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

Huawei Mobile Connect Modem 3 G installation problem

Hi, I use Windows Vista Home Premium SP2 on a laptop Dell Inspiron 1520, with all the updates on the system and updated regularly. Last week, I bought a unit of USB stick from a vendor (Meteor, Ireland) to connect to the internet using this stick. I followed the instructions; inserted the stick, waited a few minutes for the program Autorun start, but he has never started. Then I went to «my computer» to start the installer manually, I saw 2 new readers, F and G, and when I clicked on each, they simply disappeared one by one. As the new disks disappeared, I couldn’t go in the folders and look for installers.

Then I went to windows update to check if there is no updated driver for this device, and it showed me «Dibcom 9080-device of TV Tuner» update. I tried to install, but the insatallation to no avail. I tried again, showed another installation failure warning message.

Then, I went into Device Manager, given the attention yellow icons next to «USB Mass Storage Device» and «Dibcom TV Tuner device,» I uninstalled, restarted the computer and tried to install the device again. When I inserted the device into the USB port, box «new hardware installation» appeared and I waited for about half an hour, which is too I think. The installation dialog box said «Search drivers pre-configured», which I suppose that my system was not looking into the USB device for pilots, but for the system windows itself and spending far too much time.

The result was failure, even though the dialog box says «your device is ready to use», I was not able to enter the unit and the installation of the Mobile Internet software, namely «Broadband to Go.» Device Manager showed a yellow warning next to ‘Device of TV Tuner Dibcom’ message, «USB Mass Storage Device» and there are 2 products «USB Mass Storage Device» under the USB in the Device Manager section.

This device has been installed and works perfectly on my laptop which runs on Windows XP Professional, I am writing this message from. On the Device Manager, under dfferent sections I see Huawei on items, such as hard drives, CD-ROM/DVD-ROM drives, Modems, Ports, and USB controllers.

My theory is; Vista is the thought that the device’s Tuner TV Dibcom, trying to load these fake drivers and is in conflict with the device itself.  Even if I am able to seize the records of the device and install the software, whenever I stick, Vista will run the stick as a TV Tuner device and which would create a conflict. Based on this theory, I went to follow in the registry and searched for anything that is named «dibcom» and ‘9080’ and I deleted everything in the registry, but it does no more, whenever I plug the stick into the laptop, Tuner TV Dibcom pilots successfully load (!) and I am unable to use this device to connect to the internet.

I hope I gave enough information for troubleshooting. Please let me know if you need more information.

Thank you

btaspinar

Hello btaspinar, welcome.

I would suggest trying the following:

REMOVE THE DEVICE FROM DEVICE MANAGER DRIVER

1. open Device Manager
2. right click the Dibcom TV Tunder device and select ‘properties ‘.
3. click on the tab «Driver» at the top
4. click on the «Uninstall» button
5. check the option ‘Remove the Driver’ and cofirm uninstall it, then…

CHANGE THE SETTINGS FOR AUTOMATIC DRIVER INSTALLATION

1. click on START
2. right click «Computer» and select «Properties».
3. click on «Advanced system settings» on the top left side
4. click on the tab «hardware».
5. click on «Windows Update driver settings.
6. choose «ask me every time…». ‘ setting, click ‘OK’, click ‘Apply’, click ‘OK’ and restart your computer and try reinstalling the device.

Let us know if it works,

Thank you!

5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

Hi all

I just bought 8 streams HP 5901tw 4 days ago, yesterday, after internet connection using my card of 4G (WWAN driver) in my Tablet 8 Stream, suddenly the internet connection dropped and I lost my 4 G network card. I don’t know why it happens by itself. But for connection Wifi still works well and wifi interface is always detected in network adapter but 4G is missing from the list.

In Device Manager I see list of pilot missing in other devices-> HUAWEI Broadband Driver Module is missing from my Windows with Bing 32 bit OS 8.1. I try to find the driver through windows update, website of hp or other sources, but is not found. I also tried to update the BIOS firmware to the latest version and upgrade of such software firmware driver LAN, etc. from the HP Web site, but still can not fix missing pilot of the HUAWEI Module of high speed.

I also try reboot several times, making recovery, but still having lack of driver for HUAWEI ADSL Module.

Last effort, I try to current level Windows 8.1 to Windows 10, but still no conclusion success lack driver HUAWEI or fixing my 4G network missing question.

Now I can still connect to the internet with my 4 G card more every trip.

Someone there solution and how is address/where to download those missing 4 G network driver (HUAWEI ADSL Module) 8.1 for Windows or Windows 10 HP 5901tw 8 streaming?

Really appreciate for any help and answer including HP support.

It’s really annoying to have this problem and get stuck without a solution. I just enjoy this new Tablet HP for 2 days and now unable to connect to the 4G network more.

Thank you.

Kind regards

Wachyu

I finally found the problem with the HUAWEI ADSL Module in my stream 8 HP (after 2 days of sleep trying to install and uninstall the driver and try all options).

It seems maybe some Windows Update or a driver is trying to change the firmware inside the card top debit MOBILE HUAWEI to download mode (VID:12 d 1 PID:1568), so it can’t use any driver installed in point 8.1 of Windows.

I tried to manually change the download mode inside the HUAWEI tools firmware: Revskills (B. Kerler credit) return to the standard mode and then reset, then the Device Manager will detect again under the new material in NIC as HUAWEI Mobile Broadband Module (VID:12 d 1 PID:1570) and automatically installed its driver from Microsoft.

VOILLAA, My Mobile Broadband can now be re-used to connect to Internet and now also presented in the connection.

A lot of delicate here to force Windows using HUAWEI driver to use the COM Port to communicate with the card mobile broadband HUAWEI inside and then using Revskills tools to change the mode to return to standard mode.

If someone knows this problem and wants my help, just ping me and I’ll be happy to help you in the orientation.

Error 633: the modem (or other connecting device) is already in use or is not configured correctly. Any solution?

I have Microsoft Vista Home Premium edition. I use the data card (broadband +, model — HUAWEI EC1262) to connect to the internet.
I get error 633 whenever I try to use the data card to connect to the internet on my laptop. He says that «the modem (or other connecting device) is already in use or is not configured properly» and preventing me from accessing Internet.

I tried with a different brand of card data, but still getting same error. Map data even works on another laptop with Win7.

I did all the options like:
1 uninstall and reinstall modem drivers
2. release the COM port and the new port assigng

We always get but same error. Any solution for this problem would make.

Have you tried system restore? If you can restore the system to the date where it worked fine maybe it will work.

System Restore frequently asked questions.

Huawei mobile adapter unplugged network cable. How to connect

Huawei mobile adapter unplugged network cable. How to connect?

You can just X that out or let it go on its own, doesn’t mean that you are not yet connected.

You press Connect on the popup of the Application.

The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

I’ve always used my blackberry to tether my phone but I get the following error message and I can’t solve this problem, any help would be appreciated, thanks!

The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

Hello

It seems that the blackberry is not more.

Pass the installation attaches on the blackberry and make sure that it is configured properly and work.

Problem with mobile MTP device connection of Samsung.

Original title: Device

I have problems with the devices. When I click my devices and printers, he claims that there is a problem with the driver for Samsung mobile MTP device but when I plug it costs and he finds all my photos. I tried troubleshooting and it says that there is a problem with the PnP device. What can I do to fix this? I have try the resolution of the problems, but it does not work. He also says that my pc Ethernet controller is not installed. Once, I tried troubleshooting but without prevail. If anyone can help with these issues it would be greatly appreciated. I tried a system restore, and it doesn’t work anymore.

Thank you very much

Hi Chris,

To provide the proper resolution, I would need more information on your side.

1. which version of the operating system are you using?

2. What is the brand and model of the computer?

3. What is the exact model of the Samsung Mobile?

4. what measures all troubleshooting have you tried?

This problem may occur because of corrupted device driver.

Method 1:
I suggest you try the procedure described in the article and see if it helps.

What to do when a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ‘ t-installed-correctly

Method 2:
If the problem persists, try to install the latest driver for Samsung mobile device MTP on the manufacturer’s Web site.

http://www.Samsung.com/us/support/supportMain.do

Hope this information helps. Answer the post with an up-to-date issue report to help you further.

Cabo rede desconectado Huawei mobile adapter. connect para o than FACO?

tenho internet banda larga com a claro, mas nao esta conectándo direito POI appears o aviso modem «cabo rede desconectado Huawei mobile adapter.

entrei em let com a central da claro e confirmou estava pensando o problema era o meu computador

Hello

Please select the language from the drop-down menu above to post your question in the language of your choice (and Portuguese is included). The forum in which you’ve posted is for English only. If you can’t find your language above, support for additional international sites options are by following the link below:

Thank you

Kosh

Airtel 4 G (Huawei Mobile Wifi) Hotspot is not showing network on EL captain

Hello

I just bought an Airtel 4 G model Hotspot(Huawei Mobile Wifi) E 5573. There are 2 ways to connect this model to my macbook pro which is running on EL CAPTAIN 10.11.2

1. I can connect this modem wifi with the supplied USB cable. In this case the internet arrives on mac and it works well

2. Another way is to use this modem as a WIFI router. Now for some reason any my laptop does not show this network in the wifi networks list. The network showed on all my other devices such as Iphone, Android, iPhone and Windows pc but not on mac. Surprisingly, it shows on my friends mac but not on mine.

Can help understand what can be done so that I can see this network appears in the list of networks.

Thank you

Pawan

Change channel 6 auto. He began working

«I supposedly ‘ successfully updated ‘ SAMSUNG Mobile Composite Device Software, but ‘My computer’ is not always recognize it

«I supposedly ‘ successfully updated ‘ SAMSUNG Mobile Composite Device Software, but»My Computer»still does not — so I can’t add anything to my cell phone from my computer, etc.  It doesn’t «appear» when I press the icon to remove an instrument safely.  H E L P!

Hello

1. which version of the Windows operating system is installed on your computer?
2 are you able to install the software driver Samsung successfully?
3. have you made changes on the computer before this problem?

Try connecting to another USB port and check if the Samsung cell phone is detected or try to connect the Samsung cell phone on another computer.

(a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
(b) click on the Hardware tab.
(c) click the Device Manager button.
(d) expand Bus USB controllers.
(e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
(f) restart the computer and reinstall the USB controllers.
(g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

Latitude E6410 Mobile broadband device not found

Hello

Could you please help me

I have an E6410, install the sim card, load and start the Service Manager Broadband Mobile and it say an error «device wide band not found Mobile».

I already download and install drivers for Broadband Mobile Wireless, two of them (5620 and 5540 mini-map) I really do not understand how to determine which of them installed in my laptop. Y at — it an idea?

Thanks in advance

PS Sorry for my English

Hello, I have the same problem, I used the Dell Mobile Broadband utility and run the self diagnostic, and the result was down: HardwareTest. I guess that the unit is not installed or not connected to the motherboard. How can I activate this device? There must be a setting in the BIOS, or something is not pluged in correctly for this laptop. also, mine is a Latitude E6410 with Win7.

I saw no response for this post.

Please, the USB Modem is very annoying.

Best regards

Juan Carlos

I downloaded the free app Adobe Content Viewer, but when I try to connect, I get an error message «authentication failure». What should I do to fix?

I downloaded the free app Adobe Content Viewer, but when I try to connect, I get an error message «authentication failure». What should I do to fix this?

Did you go digitalpublishing.acrobat.com, connect with the Adobe ID and accept the terms of use? If this is not the case, do using a computer. You can’t do this from a mobile device. This is not an automatic process, you must do it manually.

15 15 HP — r208nl: start the device not found error (3FO)

Hello

I have this laptop from less-than-one-year-old (this guy: http://icecat.us/us/p/hp/l0n16ea/laptops-0889296492238-15-r208nl-26524145.html) and I have the Boot Device not found error infamous.

I’m not sure if this is relevant, but the problem occurred a few weeks after the upgrade to Windows 10 (when bought, laptop had Windows 8.1, probably an update of Windows 7).

Also, I noticed this basic operation to during the priming phase take a long time. For example, when I press F10, it takes about 1-2 minutes to bring up the BIOS configuration screen.

There are a number of similar questions on this forum, but the proposed solutions do not apply to my case or simply do not work. Here’s what I’ve tried so far, without success:

• hard reset
• reinstalling the hard drive
• automated tools in the Recovery Manager (this tool you access by pressing F11 at startup) *.
• chkdsk and identical from the command prompt (to which I have access from the Recovery Manager tool) *.

Note that even if the material for the HP PC Diagnostics tool failed hard drive test, apparently I can access my files on the hard drive of a Linux Live CD/USB (I managed to access it during a previous attempt, do not know if it can be reproduced).

I can’t test the drive on other PCs (which I have another laptop which I can plug the drive may be defective), not I can try to connect another hard drive non-offending for verification (as I did not).

Any suggestion?

They gave me no installation CD/DVD (I guess I had to use the recovery partition). In case I need a new installation, how can I retrieve my serial number?

the hard drive is not accessible, I can’t access Recovery Manager simply by pressing F11, I had to use a USB recovery media

CHKDSK and even produce this error message: «cannot open volume for direct access.

It looks like your hard drive is not/is a failure. Guarantee would provide a new replacement — and probably send recovery media free since did you not make it yours.

You can make a Windows 10 usb or dvd using the free download of Ms. No license key is necessary since it has been activated at the same time on the machine.

https://www.Microsoft.com/en-us/software-download/Windows10/

Read the guide here by reinstalling an previously active Windows 10:

http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/