Ошибка компиляции для платы nodemcu 32s

I am working on DOIT ESP32 DEVKIT V1 and I’m using Arduino IDE 1.8.13 (Windows 10 Pro Education x64) for coding this board. I installed the ESP32 board (and ESP8266) as well from the boards manager inside Arduino IDE. It was working fine for some days, until, a friend sent me an .ino file and after opening it and trying to compile and upload that file on my board, a weird compilation error occurred (it’s the same error that occurred on my friend’s system, and she had to switch to another system to continue working smoothly). I am using these URLs in Additional Boards Manager URLs option under preferences in Arduino IDE:

https://dl.espressif.com/dl/package_esp32_index.json, http://arduino.esp8266.com/stable/package_esp8266com_index.json

And the following error messages appear on compilation:

In file included from c:programdatamatlabsupportpackagesr2018a3p.instrsetarduinoide.instrsetidepkgspackagesesp32toolsxtensa-esp32-elf-gcc1.22.0-97-gc752ad5-5.2.0xtensa-esp32-elfincludec++5.2.0algorithm:60:0,
                 from C:ProgramDataMATLABSupportPackagesR2018a3P.instrsetarduinoide.instrsetidepkgspackagesesp32hardwareesp321.0.6coresesp32/Arduino.h:142,
                 from sketchsketch_aug21a.ino.cpp:1:
c:programdatamatlabsupportpackagesr2018a3p.instrsetarduinoide.instrsetidepkgspackagesesp32toolsxtensa-esp32-elf-gcc1.22.0-97-gc752ad5-5.2.0xtensa-esp32-elfincludec++5.2.0utility:68:28: fatal error: bits/c++config.h: No such file or directory
compilation terminated.
exit status 1
Error compiling for board DOIT ESP32 DEVKIT V1.

Please provide me a step by step guide to fix this issue, as I am new to such errors and directory issues. Note that there are no compilation errors when I select Arduino AVR Boards (such as MEGA, UNO, etc.). I have already tried re-installing the ESP32 board from boards manager, but no success.

I am working on DOIT ESP32 DEVKIT V1 and I’m using Arduino IDE 1.8.13 (Windows 10 Pro Education x64) for coding this board. I installed the ESP32 board (and ESP8266) as well from the boards manager inside Arduino IDE. It was working fine for some days, until, a friend sent me an .ino file and after opening it and trying to compile and upload that file on my board, a weird compilation error occurred (it’s the same error that occurred on my friend’s system, and she had to switch to another system to continue working smoothly). I am using these URLs in Additional Boards Manager URLs option under preferences in Arduino IDE:

https://dl.espressif.com/dl/package_esp32_index.json, http://arduino.esp8266.com/stable/package_esp8266com_index.json

And the following error messages appear on compilation:

In file included from c:programdatamatlabsupportpackagesr2018a3p.instrsetarduinoide.instrsetidepkgspackagesesp32toolsxtensa-esp32-elf-gcc1.22.0-97-gc752ad5-5.2.0xtensa-esp32-elfincludec++5.2.0algorithm:60:0,
                 from C:ProgramDataMATLABSupportPackagesR2018a3P.instrsetarduinoide.instrsetidepkgspackagesesp32hardwareesp321.0.6coresesp32/Arduino.h:142,
                 from sketchsketch_aug21a.ino.cpp:1:
c:programdatamatlabsupportpackagesr2018a3p.instrsetarduinoide.instrsetidepkgspackagesesp32toolsxtensa-esp32-elf-gcc1.22.0-97-gc752ad5-5.2.0xtensa-esp32-elfincludec++5.2.0utility:68:28: fatal error: bits/c++config.h: No such file or directory
compilation terminated.
exit status 1
Error compiling for board DOIT ESP32 DEVKIT V1.

Please provide me a step by step guide to fix this issue, as I am new to such errors and directory issues. Note that there are no compilation errors when I select Arduino AVR Boards (such as MEGA, UNO, etc.). I have already tried re-installing the ESP32 board from boards manager, but no success.

The ESP32 has a few common problems, specially when you are trying to upload new sketches or install the ESP32 add-on on the Arduino IDE. This guide is dedicated to the ESP32 when programmed with Arduino IDE. Here, we provide a compilation with some of the most common problems with the ESP32 and how to fix them.

Important: make sure you have the latest Arduino IDE installed. Using a different Arduino IDE version might cause other unexpected problems and errors.

I am working on DOIT ESP32 DEVKIT V1 and I’m using Arduino IDE 1.8.13 (Windows 10 Pro Education x64) for coding this board. I installed the ESP32 board (and ESP8266) as well from the boards manager inside Arduino IDE. It was working fine for some days, until, a friend sent me an .ino file and after opening it and trying to compile and upload that file on my board, a weird compilation error occurred (it’s the same error that occurred on my friend’s system, and she had to switch to another system to continue working smoothly). I am using these URLs in Additional Boards Manager URLs option under preferences in Arduino IDE:

https://dl.espressif.com/dl/package_esp32_index.json, http://arduino.esp8266.com/stable/package_esp8266com_index.json

And the following error messages appear on compilation:

In file included from c:programdatamatlabsupportpackagesr2018a3p.instrsetarduinoide.instrsetidepkgspackagesesp32toolsxtensa-esp32-elf-gcc1.22.0-97-gc752ad5-5.2.0xtensa-esp32-elfincludec++5.2.0algorithm:60:0,
                 from C:ProgramDataMATLABSupportPackagesR2018a3P.instrsetarduinoide.instrsetidepkgspackagesesp32hardwareesp321.0.6coresesp32/Arduino.h:142,
                 from sketchsketch_aug21a.ino.cpp:1:
c:programdatamatlabsupportpackagesr2018a3p.instrsetarduinoide.instrsetidepkgspackagesesp32toolsxtensa-esp32-elf-gcc1.22.0-97-gc752ad5-5.2.0xtensa-esp32-elfincludec++5.2.0utility:68:28: fatal error: bits/c++config.h: No such file or directory
compilation terminated.
exit status 1
Error compiling for board DOIT ESP32 DEVKIT V1.

Please provide me a step by step guide to fix this issue, as I am new to such errors and directory issues. Note that there are no compilation errors when I select Arduino AVR Boards (such as MEGA, UNO, etc.). I have already tried re-installing the ESP32 board from boards manager, but no success.

I am working on DOIT ESP32 DEVKIT V1 and I’m using Arduino IDE 1.8.13 (Windows 10 Pro Education x64) for coding this board. I installed the ESP32 board (and ESP8266) as well from the boards manager inside Arduino IDE. It was working fine for some days, until, a friend sent me an .ino file and after opening it and trying to compile and upload that file on my board, a weird compilation error occurred (it’s the same error that occurred on my friend’s system, and she had to switch to another system to continue working smoothly). I am using these URLs in Additional Boards Manager URLs option under preferences in Arduino IDE:

https://dl.espressif.com/dl/package_esp32_index.json, http://arduino.esp8266.com/stable/package_esp8266com_index.json

And the following error messages appear on compilation:

In file included from c:programdatamatlabsupportpackagesr2018a3p.instrsetarduinoide.instrsetidepkgspackagesesp32toolsxtensa-esp32-elf-gcc1.22.0-97-gc752ad5-5.2.0xtensa-esp32-elfincludec++5.2.0algorithm:60:0,
                 from C:ProgramDataMATLABSupportPackagesR2018a3P.instrsetarduinoide.instrsetidepkgspackagesesp32hardwareesp321.0.6coresesp32/Arduino.h:142,
                 from sketchsketch_aug21a.ino.cpp:1:
c:programdatamatlabsupportpackagesr2018a3p.instrsetarduinoide.instrsetidepkgspackagesesp32toolsxtensa-esp32-elf-gcc1.22.0-97-gc752ad5-5.2.0xtensa-esp32-elfincludec++5.2.0utility:68:28: fatal error: bits/c++config.h: No such file or directory
compilation terminated.
exit status 1
Error compiling for board DOIT ESP32 DEVKIT V1.

Please provide me a step by step guide to fix this issue, as I am new to such errors and directory issues. Note that there are no compilation errors when I select Arduino AVR Boards (such as MEGA, UNO, etc.). I have already tried re-installing the ESP32 board from boards manager, but no success.

The ESP32 has a few common problems, specially when you are trying to upload new sketches or install the ESP32 add-on on the Arduino IDE. This guide is dedicated to the ESP32 when programmed with Arduino IDE. Here, we provide a compilation with some of the most common problems with the ESP32 and how to fix them.

Important: make sure you have the latest Arduino IDE installed. Using a different Arduino IDE version might cause other unexpected problems and errors.

Note: Espressif found some silicon design errors in the ESP32 which might be responsible for some unexplained errors/behavior. The errors are detailed in the following document:

• https://espressif.com/sites/default/files/documentation/eco_and_workarounds_for_bugs_in_esp32_en.pdf 

Of particular note are 3.1 (relating to power up and deep sleep wake-up) and 3.4 (relating to not restarting on brownout). The old v0 and v1 chips were used in modules labelled ESP32-WROOM-32. The errors are fixed in modules ESP32-WROOM-32E and any other ESP32 designations ending in E.
See https://www.espressif.com/en/products/modules for full details. So, to avoid getting issues with your ESP32, we recommend searching for the ones labeled ESP32-WROOM-32E.

1. How do I install the ESP32 add-on for the Arduino IDE?

There’s an add-on for the Arduino IDE that allows you to program the ESP32 using the Arduino IDE and its programming language. Follow one of the next Units to prepare your Arduino IDE to work with the ESP32 in your operating system:

• Windows instructions – ESP32 Board in Arduino IDE
• Mac and Linux instructions – ESP32 Board in Arduino IDE

2. I can’t see the ESP32 boards in the Arduino IDE Tools menu (Windows PC)

If you still don’t see the boards in the Arduino IDE, make sure you click on the small arrow (highlighted in the figure below) to scroll all the way down through the boards:

If at this moment you can’t find your ESP32 board name, we recommend repeating the installation process from scratch.

• Windows instructions – ESP32 Board in Arduino IDE
• Mac and Linux instructions – ESP32 Board in Arduino IDE

3. C:Users UserDocuments Arduino hardware espressif esp32/tools /xtensa-esp32-elf /bin/ xtensa-esp32- elf-g++”: file does not exist

After installing the ESP32 add-on, if you open the Arduino IDE and it fails to compile code to your ESP32 board, we recommend re-running the Arduino IDE ESP32 add-on intallation.

Note: Windows PCs often have multiple Arduino IDE versions installed (portable and local installations). Make sure you are running the Arduino IDE where you installed the ESP32 add-on.

4. A fatal error occurred: “Failed to connect to ESP32: Timed out… Connecting…”

When you try to upload a new sketch to your ESP32 and it fails to connect to your board, it means that your ESP32 is not in flashing/uploading mode.

Having the right board name and COM por selected, follow these steps:

• Hold-down the “BOOT” button in your ESP32 board

• Press the “Upload” button in the Arduino IDE to upload a new sketch:

• After you see the  “Connecting….” message in your Arduino IDE, release the finger from the “BOOT” button:

• After that, you should see the “Done uploading” message

That’s it. Your ESP32 should have the new sketch running. With those boards/with that setup, after uploading a new sketch, press the “ENABLE” button to restart the ESP32 and run the new uploaded sketch.

You’ll also have to repeat that button sequence every time you want to upload a new sketch. But if you want to solve this issue once for all without the need to press the BOOT button, follow the suggestions in the next guide:

• [SOLVED] Failed to connect to ESP32: Timed out waiting for packet header

To be honest we’re not sure why that happens with the newer boards. We don’t have any ESP32 board with that behavior. We think there might be something different with your specific board or the Arduino IDE fails to send the right command sequence to put the ESP32 automatically in flashing/uploading mode.

5. Error compiling WiFiScan sketch

If you try to upload the ESP32 WiFiScan.ino sketch provided in the ESP32 Getting Started guide:

And it fails to compile with a similar error message:

In function ‘void setup()’:
ScanNetworks:52: error: ‘class WiFiClass’ has no member named ‘firmwareVersion’
String fv = WiFi.firmwareVersion();

It looks like your Arduino IDE is compiling the WiFi library for the Arduino board (instead of using the ESP32 WiFi library).

Note: you’ll probably never use any WiFi shield with your Arduino board, right? If you don’t use it, you need to remove that folder/those folders from your Arduino IDE (move it to your desktop, for example).

The WiFi library is located, in a similar path:

C:UsersruisantosDownloadsarduino-1.8.7-windowsarduino-1.8.7librariesWiFi

And/or at:

C:UsersruisantosDocumentsArduinolibrarieslibrariesWiFi

After removing the entire WiFi library folder from one location or both locations, restart your Arduino IDE and try to compile the code again.

If you plug your ESP32 board to your computer, but you can’t find the ESP32 Port available in your Arduino IDE (it’s grayed out):

It might be one of these two problems: 1. USB drivers missing or 2. USB cable without data wires.

1. If you don’t see your ESP’s COM port available, this often means you don’t have the USB drivers installed. Take a closer look at the chip next to the voltage regulator on board and check its name.

The ESP32 DEVKIT V1 DOIT board uses the CP2102 chip.

Go to Google and search for your particular chip to find the drivers and install them in your operating system.

You can download the CP2102 drivers on the Silicon Labs website.

After they are installed, restart the Arduino IDE and you should see the COM port in the Tools menu.

2. If you have the drivers installed, but you can’t see your device, double-check that you’re using a USB cable with data wires.

USB cables from powerbanks often don’t have data wires (they are charge only). So, your computer will never establish a serial communication with your ESP32. Using a a proper USB cable should solve your problem.

7. Arduino IDE Serial Monitor “doesn’t work”

If the ESP32 is only printing weird text or gibberish messages in your Arduino IDE Serial Monitor, make sure you have the right COM port selected and set the right baud rate as shown below. In most examples, we’re using 115200 baud rate.

8. Error: “Brownout detector was triggered”

When you open your Arduino IDE Serial monitor and the error message “Brownout detector was triggered” is constantly being printed over and over again. It means that there’s some sort of hardware problem.

It’s often related to one of the following issues:

• Poor quality USB cable;
• USB cable is too long;
• Board with some defect (bad solder joints);
• Bad computer USB port;
• Or not enough power provided by the computer USB port.

Solution: try a different shorter USB cable (with data wires), try a different computer USB port or use a USB hub with an external power supply.

9. I can’t make the ESP32 add-on work with Arduino IDE

If you’ve followed all the troubleshooting tips and the ESP32 add-on doesn’t work with the Arduino IDE, we recommend experimenting programming the ESP32 with Atom text editor and PlatformIO IDE. Follow this post: Atom text editor with PlatformIO IDE to program the ESP32.

Wrapping Up

We hope you’ve found this guide useful. If you encounter any other issues, please post them in comments below and we’ll try to help you solve your problem.

We have other tutorials with ESP32 that you might like:

• ESP32 with Multiple DS18B20 Temperature Sensors
• ESP32 Data Logging Temperature to MicroSD Card
• ESP32 with DC Motor and L298N Motor Driver – Control Speed and Direction

We hope you’ve found this tutorial useful. If you like ESP32 and you want to learn more, we recommend enrolling in Learn ESP32 with Arduino IDE course.

Thanks for reading.

Board
Esp32S2 Dev Module and Esp32S3 Dev Module

Device Description
NodeMcu-32S or Esp32-S3-DevKitC-1 v1.6
Testing with Dallas OneWire Temperature sensor

Hardware Configuration
GPIO 2 connected to Dallas Temperature sensor

Version
latest master

IDE Name
Arduino IDE 1.8.20

Operating System
Windows 10

Flash frequency
80 Mhz

PSRAM enabled
no

Upload speed
921600

Description:
I am getting an error while compiling sample/example code for Dallas Temperature sensor.
Steps to generate the error:
1- Load the code: File -> Examples -> Dallas Temperature -> Simple
2- verify / Compile

Compiler generates the following error:
OneWire_direct_gpio.h:191:38: error: ‘esp32_gpioMux’ was not declared in this scope ESP_REG(DR_REG_IO_MUX_BASE + esp32_gpioMux[pin].reg) = pinFunction;

It appears that «esp32_gpioMux» is no longer defined!!!

Sketch:
// Include the libraries we need
#include <OneWire.h>
#include <DallasTemperature.h>

// Data wire is plugged into port 2 on the Arduino
#define ONE_WIRE_BUS 2

// Setup a oneWire instance to communicate with any OneWire devices (not just Maxim/Dallas temperature ICs)
OneWire oneWire(ONE_WIRE_BUS);

// Pass our oneWire reference to Dallas Temperature.
DallasTemperature sensors(&oneWire);

/*

• The setup function. We only start the sensors here
  */
  void setup(void)
  {
  // start serial port
  Serial.begin(9600);
  Serial.println(«Dallas Temperature IC Control Library Demo»);

// Start up the library
sensors.begin();
}

/*

• Main function, get and show the temperature
  */
  void loop(void)
  {
  // call sensors.requestTemperatures() to issue a global temperature
  // request to all devices on the bus
  Serial.print(«Requesting temperatures…»);
  sensors.requestTemperatures(); // Send the command to get temperatures
  Serial.println(«DONE»);
  // After we got the temperatures, we can print them here.
  // We use the function ByIndex, and as an example get the temperature from the first sensor only.
  float tempC = sensors.getTempCByIndex(0);

// Check if reading was successful
if(tempC != DEVICE_DISCONNECTED_C)
{
Serial.print(«Temperature for the device 1 (index 0) is: «);
Serial.println(tempC);
}
else
{
Serial.println(«Error: Could not read temperature data»);
}
}

Errors or Incorrect Output

Debug Message
In file included from C:UserseghavAppDataLocalarduino15packagesesp32hardwareesp322.0.3-RC1coresesp32/Arduino.h:36,
from C:UserseghavDocumentsArduinolibrariesOneWireOneWire.cpp:142:
C:UserseghavDocumentsArduinolibrariesOneWireutil/OneWire_direct_gpio.h: In function ‘void directModeInput(uint32_t)’:
C:UserseghavDocumentsArduinolibrariesOneWireutil/OneWire_direct_gpio.h:191:38: error: ‘esp32_gpioMux’ was not declared in this scope
ESP_REG(DR_REG_IO_MUX_BASE + esp32_gpioMux[pin].reg) = pinFunction;
^~~~~~~~~~~~~
C:UserseghavAppDataLocalarduino15packagesesp32hardwareesp322.0.3-RC1coresesp32/esp32-hal.h:73:47: note: in definition of macro ‘ESP_REG’
#define ESP_REG(addr) *((volatile uint32_t *)(addr))
^~~~
C:UserseghavDocumentsArduinolibrariesOneWireutil/OneWire_direct_gpio.h: In function ‘void directModeOutput(uint32_t)’:
C:UserseghavDocumentsArduinolibrariesOneWireutil/OneWire_direct_gpio.h:232:38: error: ‘esp32_gpioMux’ was not declared in this scope
ESP_REG(DR_REG_IO_MUX_BASE + esp32_gpioMux[pin].reg) = pinFunction;
^~~~~~~~~~~~~
C:UserseghavAppDataLocalarduino15packagesesp32hardwareesp322.0.3-RC1coresesp32/esp32-hal.h:73:47: note: in definition of macro ‘ESP_REG’
#define ESP_REG(addr) *((volatile uint32_t *)(addr))
^~~~
exit status 1
Error compiling for board ESP32S3 Dev Module.

Arduino: 1.8.10 (Windows XP), Плата:»NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Disabled, All SSL ciphers (most compatible), 4M (2M SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 115200″

C:Program FilesArduinoarduino-builder -dump-prefs -logger=machine -hardware C:Program FilesArduinohardware -hardware C:Documents and SettingsworkLocal SettingsApplication DataArduino15packages -tools C:Program FilesArduinotools-builder -tools C:Program FilesArduinohardwaretoolsavr -tools C:Documents and SettingsworkLocal SettingsApplication DataArduino15packages -built-in-libraries C:Program FilesArduinolibraries -libraries C:Documents and SettingsworkМои документыArduinolibraries -fqbn=esp8266:esp8266:nodemcuv2:xtal=80,vt=flash,exception=disabled,ssl=all,eesz=4M2M,ip=lm2f,dbg=Disabled,lvl=None____,wipe=none,baud=115200 -vid-pid=0000_0000 -ide-version=10810 -build-path C:DOCUME~1workLOCALS~1Temparduino_build_628683 -warnings=all -build-cache C:DOCUME~1workLOCALS~1Temparduino_cache_923463 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.mkspiffs.path=C:Documents and SettingsworkLocal SettingsApplication DataArduino15packagesesp8266toolsmkspiffs2.5.0-3-20ed2b9 -prefs=runtime.tools.mkspiffs-2.5.0-3-20ed2b9.path=C:Documents and SettingsworkLocal SettingsApplication DataArduino15packagesesp8266toolsmkspiffs2.5.0-3-20ed2b9 -prefs=runtime.tools.xtensa-lx106-elf-gcc.path=C:Documents and SettingsworkLocal SettingsApplication DataArduino15packagesesp8266toolsxtensa-lx106-elf-gcc2.5.0-3-20ed2b9 -prefs=runtime.tools.xtensa-lx106-elf-gcc-2.5.0-3-20ed2b9.path=C:Documents and SettingsworkLocal SettingsApplication DataArduino15packagesesp8266toolsxtensa-lx106-elf-gcc2.5.0-3-20ed2b9 -prefs=runtime.tools.python.path=C:Documents and SettingsworkLocal SettingsApplication DataArduino15packagesesp8266toolspython3.7.2-post1 -prefs=runtime.tools.python-3.7.2-post1.path=C:Documents and SettingsworkLocal SettingsApplication DataArduino15packagesesp8266toolspython3.7.2-post1 -verbose C:Program FilesArduinofirmwareGyverLamp_v1.4GyverLamp_v1.4GyverLamp_v1.4.ino
panic: Failed to find GetFileInformationByHandleEx procedure in kernel32.dll: Не найдена указанная процедура.

goroutine 1 [running]:
syscall.(*LazyProc).mustFind(0x11c419e0)
/home/jenkins/go1.12.5/src/syscall/dll_windows.go:311 +0x42
syscall.(*LazyProc).Addr(0x11c419e0, 0xdda500)
/home/jenkins/go1.12.5/src/syscall/dll_windows.go:318 +0x21
internal/syscall/windows.GetFileInformationByHandleEx(0x780, 0x9, 0x11c71a04, 0x8, 0x3, 0x11c1f348)
/home/jenkins/go1.12.5/src/internal/syscall/windows/zsyscall_windows.go:353 +0x27
os.newFileStatFromGetFileInformationByHandle(0x11d1c040, 0x3c, 0x780, 0x0, 0x11d1c040, 0x3c)
/home/jenkins/go1.12.5/src/os/types_windows.go:52 +0x135
os.(*File).Stat(0x11c3eee0, 0x984490, 0x11c3eee0, 0x0, 0x11c3eee0)
/home/jenkins/go1.12.5/src/os/stat_windows.go:55 +0x133
io/ioutil.ReadFile(0x11d1c040, 0x3c, 0x0, 0x0, 0x0, 0x0, 0x0)
/home/jenkins/go1.12.5/src/io/ioutil/ioutil.go:62 +0xac
github.com/arduino/go-paths-helper.(*Path).ReadFile(…)
/home/jenkins/workspace/arduino-builder-all-cross-cli-inception/src/github.com/arduino/go-paths-helper/paths.go:407
github.com/arduino/arduino-cli/arduino/cores/packageindex.LoadIndex(0x11c3eed8, 0xa29e60, 0x11c4de00, 0x0)
/home/jenkins/workspace/arduino-builder-all-cross-cli-inception/src/github.com/arduino/arduino-cli/arduino/cores/packageindex/index.go:205 +0x2f
github.com/arduino/arduino-cli/arduino/cores/packagemanager.(*PackageManager).LoadPackageIndexFromFile(0x11cfec60, 0x11c3eed8, 0x0, 0x0, 0x11c3eed8)
/home/jenkins/workspace/arduino-builder-all-cross-cli-inception/src/github.com/arduino/arduino-cli/arduino/cores/packagemanager/package_manager.go:202 +0x25
github.com/arduino/arduino-cli/arduino/cores/packagemanager.(*PackageManager).loadPlatforms(0x11cfec60, 0x11c91650, 0x11c3ee18, 0x7, 0x11c44c18)
/home/jenkins/workspace/arduino-builder-all-cross-cli-inception/src/github.com/arduino/arduino-cli/arduino/cores/packagemanager/loader.go:186 +0xf4d
github.com/arduino/arduino-cli/arduino/cores/packagemanager.(*PackageManager).LoadHardwareFromDirectory(0x11cfec60, 0x11c3ebf8, 0xdda500, 0x703815)
/home/jenkins/workspace/arduino-builder-all-cross-cli-inception/src/github.com/arduino/arduino-cli/arduino/cores/packagemanager/loader.go:116 +0x43f
github.com/arduino/arduino-cli/arduino/cores/packagemanager.(*PackageManager).LoadHardwareFromDirectories(0x11cfec60, 0x11c3ec00, 0x2, 0x2, 0x1, 0x1)
/home/jenkins/workspace/arduino-builder-all-cross-cli-inception/src/github.com/arduino/arduino-cli/arduino/cores/packagemanager/loader.go:52 +0x4f
github.com/arduino/arduino-cli/legacy/builder.(*HardwareLoader).Run(0xdebc68, 0x11ce05a0, 0xdebc68, 0x0)
/home/jenkins/workspace/arduino-builder-all-cross-cli-inception/src/github.com/arduino/arduino-cli/legacy/builder/hardware_loader.go:43 +0xe4
github.com/arduino/arduino-cli/legacy/builder.(*ContainerSetupHardwareToolsLibsSketchAndProps).Run(0xdebc68, 0x11ce05a0, 0xdebc68, 0xdda500)
/home/jenkins/workspace/arduino-builder-all-cross-cli-inception/src/github.com/arduino/arduino-cli/legacy/builder/container_setup.go:60 +0x266
github.com/arduino/arduino-cli/legacy/builder.runCommands(0x11ce05a0, 0x11c71f0c, 0x2, 0x2, 0xffffff01, 0x0, 0x4)
/home/jenkins/workspace/arduino-builder-all-cross-cli-inception/src/github.com/arduino/arduino-cli/legacy/builder/builder.go:210 +0xbd
github.com/arduino/arduino-cli/legacy/builder.(*ParseHardwareAndDumpBuildProperties).Run(0x11c71f40, 0x11ce05a0, 0xdebbb4, 0x11c3ec90)
/home/jenkins/workspace/arduino-builder-all-cross-cli-inception/src/github.com/arduino/arduino-cli/legacy/builder/builder.go:198 +0xbc
github.com/arduino/arduino-cli/legacy/builder.RunParseHardwareAndDumpBuildProperties(…)
/home/jenkins/workspace/arduino-builder-all-cross-cli-inception/src/github.com/arduino/arduino-cli/legacy/builder/builder.go:231
main.main()
/home/jenkins/workspace/arduino-builder-all-cross-cli-inception/src/github.com/arduino/arduino-builder/main.go:388 +0x772
C:Program FilesArduinoarduino-builder возвратил 2

Ошибка компиляции для платы NodeMCU 1.0 (ESP-12E Module).

Offline

Зарегистрирован: 17.03.2020

Я новичок помогите пожалуйста решить проблему.Буду очень благодарен.

Arduino: 1.8.12 (Windows 10), Плата:»NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most compatible), 4MB (FS:2MB OTA:~1019KB), 2, v2 Lower Memory, Disabled, None, Only Sketch, 115200″

In file included from D:Arduinoblynk(Temp)done.inodonedone.ino:4:0:

C:UsersxakerDocumentsArduinolibrariesoneWire/OneWire.h:108:2: error: #error «Please define I/O register types here»

 #error «Please define I/O register types here»

  ^

Несколько библиотек найдено для «BlynkSimpleEsp8266.h»

 Используется: C:UsersxakerDocumentsArduinolibrariesBlynk-0.6.1

Не используется: C:UsersxakerDocumentsArduinolibrariesBlynk

Не используется: C:UsersxakerDocumentsArduinolibrariesblynk-library-master

Несколько библиотек найдено для «OneWire.h»

 Используется: C:UsersxakerDocumentsArduinolibrariesoneWire

Не используется: C:UsersxakerDocumentsArduinolibrariesDallasTemperature

exit status 1

Ошибка компиляции для платы NodeMCU 1.0 (ESP-12E Module).

Этот отчёт будет иметь больше информации с

включенной опцией Файл -> Настройки ->

«Показать подробный вывод во время компиляции»

#arduino #compilation #fatal-error #esp32

Вопрос:

Я работаю над DOIT ESP32 DEVKIT V1 и использую Arduino IDE 1.8.13 (Windows 10 Pro Education x64) для кодирования этой платы. Я установил плату ESP32 (и ESP8266) также из менеджера плат внутри Arduino IDE. Он работал нормально в течение нескольких дней, пока один друг не прислал мне файл .ino, и после того, как он открыл его и попытался скомпилировать и загрузить этот файл на мою доску, произошла странная ошибка компиляции (это та же ошибка, которая произошла в системе моей подруги, и ей пришлось переключиться на другую систему, чтобы продолжить бесперебойную работу). Я использую эти URL-адреса вДополнительные URL-адреса менеджера плат в разделе «Настройки» в среде IDE Arduino:

https://dl.espressif.com/dl/package_esp32_index.json, http://arduino.esp8266.com/stable/package_esp8266com_index.json

И при компиляции появляются следующие сообщения об ошибках:

 In file included from c:programdatamatlabsupportpackagesr2018a3p.instrsetarduinoide.instrsetidepkgspackagesesp32toolsxtensa-esp32-elf-gcc1.22.0-97-gc752ad5-5.2.0xtensa-esp32-elfincludec  5.2.0algorithm:60:0,
                 from C:ProgramDataMATLABSupportPackagesR2018a3P.instrsetarduinoide.instrsetidepkgspackagesesp32hardwareesp321.0.6coresesp32/Arduino.h:142,
                 from sketchsketch_aug21a.ino.cpp:1:
c:programdatamatlabsupportpackagesr2018a3p.instrsetarduinoide.instrsetidepkgspackagesesp32toolsxtensa-esp32-elf-gcc1.22.0-97-gc752ad5-5.2.0xtensa-esp32-elfincludec  5.2.0utility:68:28: fatal error: bits/c  config.h: No such file or directory
compilation terminated.
exit status 1
Error compiling for board DOIT ESP32 DEVKIT V1.
 

Пожалуйста, предоставьте мне пошаговое руководство по устранению этой проблемы, так как я новичок в таких ошибках и проблемах с каталогами. Обратите внимание, что при выборе плат Arduino AVR (таких как MEGA, UNO и т. Д.) Ошибок компиляции не возникает. Я уже пытался переустановить плату ESP32 из диспетчера плат, но безуспешно.

Комментарии:

1. удалите папку пакета поддержки плат esp32 , а затем попробуйте установить его снова

2. Спасибо @Juraj, это сработало! Проблема была в папке. На самом деле никакой папки не было. Поэтому я вручную создал папку и установил в нее ядро. ИСПРАВЛЕНО! 🙂

Ответ №1:

ИСПРАВЛЕНО! Проблема заключалась в том, что нигде не было папок /hardware/espressif/esp32, несмотря на то, что была установлена поддержка платы. Поэтому я удалил плату из менеджера платы Arduino, сам создал папки и установил в них ядро ESP32. Я следовал всем инструкциям, приведенным по этой ссылке: https://learn.sparkfun.com/tutorials/esp32-thing-hookup-guide/installing-the-esp32-arduino-core

Они предоставили все шаги (включая создание папок/каталогов) для установки ядра через репозиторий github. И теперь ошибка исправлена, и она работает отлично!