Ошибка check headlight range control


  1. уно

    29 янв 2009
    123
    Q7 сы лайн 3тди


  2. SamFM

    20 мар 2008
    468
    Москва
    Audi 100 C3 (MC2), Mercedes W201

    А как / чем адаптируете?
    По-идее нужно в VagCOM зайти в блок фар -> почистить ошибки -> зайти в базовые установки 001 канал / сбросить показания.

    Зависит от машины, но если использовать более продвинутый адаптер VCDS — надо делать то же самое, но в 001 канале справа вверху будет кнопка ON/OFF/Next (ВКЛ/ВЫКЛ/Далее). Нужно нажать на нее 1 раз, подождать пока моторчики сделают свое дело, отрегулировать фары вручную и опять на ту же кнопку нажать.


    Stop hovering to collapse…
    Click to collapse…


    Hover to expand…
    Нажмите, чтобы раскрыть…


  3. melkon

    21 сен 2005
    27.088
    Московская обл.
    Tuareg NF 3.0TDI на пневме.

    А что с фарами то делали ?


    Stop hovering to collapse…
    Click to collapse…


    Hover to expand…
    Нажмите, чтобы раскрыть…


  4. melkon

    21 сен 2005
    27.088
    Московская обл.
    Tuareg NF 3.0TDI на пневме.

    Cтоит добавить что все это надо делать на ровной площадке при прибл идентичных показаниях датчиков положения кузова .


    Stop hovering to collapse…
    Click to collapse…


    Hover to expand…
    Нажмите, чтобы раскрыть…


  5. уно

    29 янв 2009
    123
    Q7 сы лайн 3тди

    всем спасибо все получилось.:[:]||||||


  6. dus72

    4 янв 2009
    12.808
    Тюменская обл.
    957 4.5t Magnum 23″


    Stop hovering to collapse…
    Click to collapse…


    Hover to expand…
    Нажмите, чтобы раскрыть…


  7. dus72

    4 янв 2009
    12.808
    Тюменская обл.
    957 4.5t Magnum 23″


    Stop hovering to collapse…
    Click to collapse…


    Hover to expand…
    Нажмите, чтобы раскрыть…

Фото в бортжурнале Audi A4 (B8)

Всем привет. Случилась такая проблема. Еду на работу а мне на пол пути выскакивает такая ошибка headlight range control defective audi a4. Теперь когда машину заводишь фары не отпускаются и не поднимаются. Подскажите что проверить первым делом, а если можно то с фото что бы было понятней.Фото спер с нета, с телефона скидывать долго, но суть та же. Всем спасибо и удачи на дорогах.

Комментарии
14

Войдите или зарегистрируйтесь, чтобы писать комментарии, задавать вопросы и участвовать в обсуждении.

Проверь предохранитель с левой стороны передней панели сними крышку и сними и поставь предохранитель на место может помочь. У меня такое было когда попал в ямку не большую и удара не было но вот такой прикол появился после снятия и установки назад предохранителя все работает по сей день.

была подобная ситуация решилось заменой датчика и адаптацие в сервисе взяли что то около 3 рублей за все )

Аналогичная проблема. Причина выход из строя одного из датчиков положения кузова, который регулирует угол наклона фар в зависимости от загрузки авто. Стоиомть нового от 5000. На разборках ищу уже пол года, не могу найти.

После снятия-подключеия одной из фар выскакивала аналогичная ошибка -фары в пол. Прчиной конечно может быть привет от датчиков положения кузова(первая же мысль). Но у меня оказалось все банальней. Васей скинул ошибку и поехал радоваться жизни дальше. Так, что преждевременную панику пока можно отбросить.

Привет, кабель приобрети, а вообще скорее всего передний.

накрылся датчик положения кузова.
сам катаюсь с такой проблемой уже 2 мес. Буду менять.
какой именно (задний или передний) не сказать, пока кабелем не проверить.

Спасибо за ответ. Но кабелем еще не обжился к сожалению.

это первое что надо покупать, когда владеешь ВАГом.
Спроси у местных или к ОД, но там денег возьмут.
В основном у всех помирает передний (у меня так же).
То, что это датчик — 99%. Больше нечему.

А меня нету спереди датчика…только сзади почему то…

Этого быть не может. По левой стороне смотрел?

Я на передке мортезы с шаровой менял…не мог я не заметить т.к. там все разбираешь

Да с обеих! я так же вижу по тому же экзисту что спереди есть датчик…но у меня его нету и не знаю почему

Удалось найти причину несоответствия наличия датчика по программе и отсутствия оного в реальности?

Здравствуйте.
Это сообщение по работе корректора фар. Проверьте, поднимаются и опускаются ли фары после запуска двигателя, проблема может быть например в разъеме, проводах, в самом корректоре фар. Еще бывает слабый аккумулятор, попробуйте провести диагностику сканером и проверить коды ошибок в памяти ЭБУ.

Балаково, Kia Ceed

Headlight Range Control Defective A6 C6

Сообщение Паша » 01 авг 2012, 23:26

Предыстория: поставил оригинальные проставки на задние пружины для увеличения клиренса на задней оси в своем универсале. Показалось что фары стали светить ближе к авто, чем раньше. Руки сделать адаптацию головного света (у меня стоит Би-ксенон) не доходили.

Сегодня была оказия и я подключил шнурок к своей ласточке, чтобы провести долгожданную операцию. Как только начал адаптацию, сразу же выскочила надпись на панели «Headlight Range Control Defective» и загорелся желтый значок фары со стрелочками вверх и вниз. В блок управления ксеноном (№55) записалась ошибка, которую пока я удалить не смог. Адаптация до конца не завершилась и висела в процессе. Скажу сразу, что я никакие манипуляции с кузовом. бампером, фарами не проводил за время владения авто.

Буду пробовать адаптировать по инструкции с http://www.ross-tech.com . По мере продвижения в решении вопроса, буду пополнять тему.

Сообщение Властелин колец » 02 авг 2012, 16:22

Сообщение Паша » 02 авг 2012, 22:06

Вот что про адаптацию в Эльзе:

Автомобили с автоматическим корректором фар:
ИнструкцияДля проверки / регулировки фар необходимо всегда переводить их в базовое положение для регулировки при помощи -VAS 5051-.
t Выполнить базовую установку с помощью тестера -VAS 5051-:

– Подключитьтестер -VAS 5051- при помощи провода адаптера -VAS 5051/5- к выключенному зажиганию.
– Включить зажигание.
– Нажать „Gefuehrte Fehlersuche (Ведомый поиск неисправностей)“
Ввести параметры автомобиля, опрашиваются все блоки управления.
– Нажать в указанном порядке следующие обозначения:
t Sprung (Переход)
t Funktions und Bauteilauswahl / Выбор функции и компонента
t Karosserie (Кузов)
t Elektrische Anlage (Электрооборудование)
t 01-Eigendiagnosefaehige Systeme (01 — самодиагностирующиеся системы)
t 55-Dynamische Leuchtweitenregelung (55 — динамическая коррекция угла наклона фар)
t J 431-Dynamische Leuchtweitenregelung, Funktionen (J 431– динамическая коррекция угла наклона фар, функционирование)
t J 431-Блок управления LWR, Базовая установка
t Нажать кнопку →
Следовать указаниям тестера и подтвердить ввод, пока не появится надпись:
J 431-Блок управления LWR, Базовая установка
t Нажать кнопку →
t Действовать в соответствии с ходом проверки

Сообщение Паша » 05 авг 2012, 20:35

Сегодня все сделал по описанию тут — Using the OBDTool to Remove the Auto Level Error ( http://www.a4mods.com ). Отличие в том, что для А6 появляется кнопочка «ON/OFF/END» в окне «004-Basic Settings», которую нужно нажать три раза. Всё!

По порядку действия:
— поставить авто на ровную площадку (в моем случае парковка возле «Гиппо» на Горецкого-Рафиева);
— запустил двигатель (не обязательно, все должно пройти просто при включенном зажигании)
— выключил ручной тормоз;
— Подключил Ваг-ком:
01-10-000-Read-Save (этим я сбросил все настройки света на заводские)
01-04-001-Go-ON/OFF/END (нажал три раза)

После проделанного ошибка сразу же исчезла сама, свет был адаптирован.

Напомню, что если необходимо отрегулировать свет фар, то это нужно сделать с помощью регулировочных винтов, расположенных на фаре сверху.

Источник

AS8 — КЛУБ ЛЮБИТЕЛЕЙ AUDI A8 и AUDI S8

В стремлении к совершенству выбираешь лучшее. AS8 Клуб — сделавшие свой выбор.

headlight range control defective

headlight range control defective

Сообщение shtepa » Вт янв 16, 2018 4:09 pm

headlight range control defective

Сообщение Akin » Вт янв 16, 2018 6:57 pm

Не работает автокорректор фар.

Выложить ошибки по 09, 34 и 55 блокам.

headlight range control defective

Сообщение shtepa » Ср янв 17, 2018 8:20 pm

Среда,17,Январь,2018,15:05:26:17500
VCDS — Windows эмулятор VAG/VAS Выполняется Windows 7 x86
VCDS Версия: 15.7.0.1
Версия данных: 20150930

Адрес 09: Блок управления бортовой сети Label: 4E0-910-279.clb
Номер блока управления: 4E0 910 279 J HW: 4E0 907 279 J
Компонент и/или версия: ILM Fahrer H12 0190
Кодировка: 0031112
Код мастерской: WSC 02313 785 00200
Дополнительная информация: 4E1910113B Wischer WWS D3 H50 0400
Дополнительная информация: Geraet 00200
VCID: 2F67355ABE591046FF-807A
Неисправности не найдены

или поиск неисправностей не поддерживается блоком управления
или ошибка связи

Адрес 34: Регулировка дорожного просвета (пневмоподвеска) Label: 4E0-910-553.clb
Номер блока управления: 4E0 910 553 E HW: 4E0 907 553 E
Компонент и/или версия: LUFTFDR.-CDC H05 4290
Кодировка: 0015510
Код мастерской: WSC 00011 888 06946
VCID: 254BD772ECA55A1605-8070
2 Найдены неисправности:

01772 — Сигнальный провод от датчика давления регулятора дор.прос.(G291)
008 — Недостоверный сигнал — Непостоянно
Стоп-кадр:
Статус неисправности: 00101000
Приоритет неисправности: 3
Частота появления ошибки: 1
Индекс забывания: 135
Пробег: 251099 km
Отсчет времени: 0
Дата: 2003.10.09
Время: 18:03:32

00778 — Датчик угла поворота рулевого колеса
008 — Недостоверный сигнал
Стоп-кадр:
Статус неисправности: 11101000
Приоритет неисправности: 3
Частота появления ошибки: 15
Индекс забывания: 96
Пробег: 251054 km
Отсчет времени: 0
Дата: 2003.10.08
Время: 00:23:32

Адрес 34: Регулировка дорожного просвета (пневмоподвеска) Label: 4E0-910-553.clb
Номер блока управления: 4E0 910 553 E HW: 4E0 907 553 E
Компонент и/или версия: LUFTFDR.-CDC H05 4290
Кодировка: 0015510
Код мастерской: WSC 00011 888 06946
VCID: 254BD772ECA55A1605-8070
2 Найдены неисправности:

01772 — Сигнальный провод от датчика давления регулятора дор.прос.(G291)
008 — Недостоверный сигнал — Непостоянно
Стоп-кадр:
Статус неисправности: 00101000
Приоритет неисправности: 3
Частота появления ошибки: 1
Индекс забывания: 135
Пробег: 251099 km
Отсчет времени: 0
Дата: 2003.10.09
Время: 18:03:32

00778 — Датчик угла поворота рулевого колеса
008 — Недостоверный сигнал
Стоп-кадр:
Статус неисправности: 11101000
Приоритет неисправности: 3
Частота появления ошибки: 15
Индекс забывания: 96
Пробег: 251054 km
Отсчет времени: 0
Дата: 2003.10.08
Время: 00:23:32

Адрес 34: Регулировка дорожного просвета (пневмоподвеска) Label: 4E0-910-553.clb
Номер блока управления: 4E0 910 553 E HW: 4E0 907 553 E
Компонент и/или версия: LUFTFDR.-CDC H05 4290
Кодировка: 0015510
Код мастерской: WSC 00011 888 06946
VCID: 254BD772ECA55A1605-8070
2 Найдены неисправности:

01772 — Сигнальный провод от датчика давления регулятора дор.прос.(G291)
008 — Недостоверный сигнал — Непостоянно
Стоп-кадр:
Статус неисправности: 00101000
Приоритет неисправности: 3
Частота появления ошибки: 1
Индекс забывания: 135
Пробег: 251099 km
Отсчет времени: 0
Дата: 2003.10.09
Время: 18:03:32

00778 — Датчик угла поворота рулевого колеса
008 — Недостоверный сигнал
Стоп-кадр:
Статус неисправности: 11101000
Приоритет неисправности: 3
Частота появления ошибки: 15
Индекс забывания: 96
Пробег: 251054 km
Отсчет времени: 0
Дата: 2003.10.08
Время: 00:23:32

Адрес 34: Регулировка дорожного просвета (пневмоподвеска) Label: 4E0-910-553.clb
Номер блока управления: 4E0 910 553 E HW: 4E0 907 553 E
Компонент и/или версия: LUFTFDR.-CDC H05 4290
Кодировка: 0015510
Код мастерской: WSC 00011 888 06946
VCID: 254BD772ECA55A1605-8070
2 Найдены неисправности:

01772 — Сигнальный провод от датчика давления регулятора дор.прос.(G291)
008 — Недостоверный сигнал — Непостоянно
Стоп-кадр:
Статус неисправности: 00101000
Приоритет неисправности: 3
Частота появления ошибки: 1
Индекс забывания: 135
Пробег: 251099 km
Отсчет времени: 0
Дата: 2003.10.09
Время: 18:03:32

00778 — Датчик угла поворота рулевого колеса
008 — Недостоверный сигнал
Стоп-кадр:
Статус неисправности: 11101000
Приоритет неисправности: 3
Частота появления ошибки: 15
Индекс забывания: 96
Пробег: 251054 km
Отсчет времени: 0
Дата: 2003.10.08
Время: 00:23:32

Адрес 55: Корректор фар Label: 4E0-910-357.clb
Номер блока управления: 4E0 910 357 HW: 4E0 907 357
Компонент и/или версия: Pre-AFS H01 0040
Кодировка: 0000002
Код мастерской: WSC 80093 222 69422
VCID: 62C18C6EBD0BED2E20-8036
4 Найдены неисправности:

01539 — Фары не отрегулированы
005 — Нет или неверная основная установка/адаптация — Индикатор неисправности ВКЛ
Стоп-кадр:
Статус неисправности: 11100101
Приоритет неисправности: 2
Частота появления ошибки: 1
Индекс забывания: 91
Пробег: 251048 km
Отсчет времени: 0
Дата: 2003.10.08
Время: 01:05:19

02233 — Блок питания левой фары(J667)
004 — Нет сигнала/связи — Индикатор неисправности ВКЛ
Стоп-кадр:
Статус неисправности: 11100100
Приоритет неисправности: 2
Частота появления ошибки: 1
Индекс забывания: 96
Пробег: 251048 km
Отсчет времени: 0
Дата: 2003.10.08
Время: 01:05:21

02234 — Блок питания правой фары(J668)
004 — Нет сигнала/связи — Индикатор неисправности ВКЛ
Стоп-кадр:
Статус неисправности: 11100100
Приоритет неисправности: 2
Частота появления ошибки: 1
Индекс забывания: 96
Пробег: 251048 km
Отсчет времени: 0
Дата: 2003.10.08
Время: 01:05:21

01316 — Блок управления тормозной системы
013 — Проверте память DTC — Непостоянно
Стоп-кадр:
Статус неисправности: 00101101
Приоритет неисправности: 2
Частота появления ошибки: 0
Индекс забывания: 136
Пробег: 251048 km
Отсчет времени: 0
Дата: 2003.10.08
Время: 01:05:28

Источник

01535 error — Headlight range control defective

Lmcc87

Registered User

I got the headlight range control defective light thrown on the dash and upon connecting VCDS I get the code 01535. Bought VCDS to try and fault find and fix this issue so new to this, anyone had this error? Lots of info on the net about the light being thrown but not on this error that I can find.

A bit of background, car is a 2011 TT Quattro with bixenon adaptive lightning, 30K on clock, lights are adaptive and work until the light is thrown on the dash after which will not self level and move side to side, turning car off and on resets them and they work fine until the light is thrown again, light only seems to be thrown after steering wheel moves 90deg+ to the right which makes me think could be a sensor issue and not a motor issue like listed below but I could be completely wrong!?

Also can anyone tell me exactly where the levelling sensors are on a Quattro car/any Quattro Audi? I have seen a lot of posts stating there is one sensor on front and back axle..this throws me it looks like I have a sensor connected to every control arm. And on them sensors, to my untrained eye they all look ok and not damaged.

Any help is much appreciated regarding any Audi model where you have had this issue. Thanks

01535 — Control Circuit for Right Headlight Range Adjusting Motor (V49)
010 — Open or Short to Plus — Intermittent
Freeze Frame:
Fault Status: 00101010
Fault Priority: 2
Fault Frequency: 1
Reset counter: 4
Mileage: 47432 km
Time Indication: 0
Date: 2016.06.16
Time: 20:10:12

Источник

HELP! Stability program error, parking brake fault, headlight range control defective

phatAvant

Registered User

I’m getting the following errors/faults and my car won’t start when they happen. I need to wait and close the car, and then try again, and eventually it will start without any errors on the dash.

First I get stability program error, then parking brake fault, and lastly headlight range control defective.

It’s a 2.0 TDI 143 from 2010, has anyone come accross this, I found one thread, but it’s from 2013 and didn’t get an answer/solution.

I was thinking maybe the battery needs replacing due to the electric errors popping up out of nowhere as nothing strange has happened to the car to trigger them.

Am totally lost here, as the car works 100% fine when the error doesn’t come up.

xpoweruk

TTTS 8J Smile Machine

Have you had the car scanned?

phatAvant

Registered User

Hi thanks, I found those too but nothing conclusive, plus I never get anything when driving, as when it starts it’s totally fine, it’s just that if it doesn’t start straight away when pushing the key in then I know I will get the 3 beeps for the same 3 errors, and then I’m stuck for a while.

VIN: WAUZZZ8K3BA****** License Plate: *******
Mileage: 66020km-41022mi Repair Order:

Chassis Type: 8K (8T0)
Scan: 01 03 05 08 09 10 15 16 17 19 42 46 52 53 55 56 62 72

VIN: WAUZZZ8K3BA064437 Mileage: 66020km-41022miles

01-Engine — Status: Malfunction 1010
03-ABS Brakes — Status: Malfunction 0010
04-Steering Angle — Status: OK 0000
05-Acc/Start Auth. — Status: Malfunction 0010
08-Auto HVAC — Status: Malfunction 0010
09-Cent. Elect. — Status: Malfunction 0010
10-Park/Steer Assist — Status: Malfunction 0010
15-Airbags — Status: OK 0000
16-Steering wheel — Status: OK 0000
17-Instruments — Status: Malfunction 0010
19-CAN Gateway — Status: Malfunction 0010
42-Door Elect, Driver — Status: OK 0000
46-Central Conv. — Status: Malfunction 0010
52-Door Elect, Pass. — Status: OK 0000
53-Parking Brake — Status: Malfunction 0010
55-Headlight Range — Status: Malfunction 0010
56-Radio — Status: Malfunction 0010
62-Door, Rear Left — Status: OK 0000
72-Door, Rear Right — Status: OK 0000

——————————————————————————-
Address 01: Engine (J623-CAGA) Labels: 03L-906-019-CAG.clb
Part No SW: 03L 906 022 NN HW: 03L 906 019 AL
Component: R4 2,0L EDC H29 9096
Revision: 25H29—
Coding: 12194012232403080000
Shop #: WSC 00150 219 87778
ASAM Dataset: EV_ECM20TDI03L906022NN A02011
ROD: EV_ECM20TDI03L906019AL.rod
VCID: 7EF3D950E10FD5CE0C-802A

3 Faults Found:
4695 — Function Restriction due to Faults in Other Modules
U1113 00 [032] — —
Intermittent — Not Confirmed — Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Mileage: 65078 km
Date: 2016.02.14
Time: 19:06:52

4698 — Function Restriction due to Faults in Other Modules
U1113 00 [032] — —
Intermittent — Not Confirmed — Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Mileage: 65078 km
Date: 2016.02.14
Time: 19:06:52

4699 — Function Restriction due to Faults in Other Modules
U1113 00 [032] — —
Intermittent — Not Confirmed — Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Mileage: 65078 km
Date: 2016.02.14
Time: 19:06:52

Readiness: 0 0 0 0 0

——————————————————————————-
Address 03: ABS Brakes (J104) Labels: 8K0-907-379-V1.clb
Part No SW: 8K0 907 379 BF HW: 8K0 907 379 BF
Component: ESP8 front H04 0030
Revision: ——— Serial number: —————
Coding: 160504
Shop #: WSC 06335 000 00000
VCID: 7EF3D950E90FD5CE0C-802A

2 Faults Found:
00473 — Control Module for Elect. Park/Hand Brake (J540)
013 — Check DTC Memory
Freeze Frame:
Fault Status: 01101101
Fault Priority: 6
Fault Frequency: 2
Reset counter: 5
Mileage: 65837 km
Time Indication: 0
Date: 2016.03.12
Time: 19:33:10

Freeze Frame:
Hex Value: 0x0000
Hex Value: 0x0782
Hex Value: 0x002E
Hex Value: 0x0295
Hex Value: 0x00FF

01314 — Engine Control Module
004 — No Signal/Communication — Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 6
Fault Frequency: 7
Reset counter: 5
Mileage: 65837 km
Time Indication: 0
Date: 2016.03.12
Time: 19:33:52

Freeze Frame:
Hex Value: 0x0000
Hex Value: 0x0782
Hex Value: 0x0027
Hex Value: 0xB995
Hex Value: 0x00FF

——————————————————————————-
Address 05: Acc/Start Auth. (J393) Labels: 8K0-907-064-05.clb
Part No SW: 8K0 907 064 CP HW: 8K0 907 064 CP
Component: BCM2 2.0 H04 0430
Revision: 00002001
Coding: 032200
Shop #: WSC 06335 000 00000
VCID: 000FA7A893FBA33E7E-8054

Subsystem 1 — Part No SW: 8T0 959 754 D HW: 8T0 959 754 D
Component: FBSAUDIB8 IDG H50 0071

Subsystem 2 — Part No SW: 8K0 905 852 D HW: 8K0 905 852 D
Component: J764 ELV MLB H37 0042

1 Fault Found:
01330 — Central Control Module for Central Convenience (J393)
013 — Check DTC Memory — Intermittent
Freeze Frame:
Fault Status: 00101101
Fault Priority: 6
Fault Frequency: 1
Reset counter: 45
Mileage: 65837 km
Time Indication: 0
Date: 2016.03.12
Time: 19:32:36

——————————————————————————-
Address 08: Auto HVAC (J255) Labels: Redir Fail!
Part No SW: 8T1 820 043 AH HW: 8T1 820 043 AH
Component: KLIMA 1 ZONE H08 0180
Revision: A1000000 Serial number: 01111020101298
Coding: 34200000
Shop #: WSC 06335 000 00000
VCID: 77FDCC74C635E4864F-8022

1 Fault Found:
01314 — Engine Control Module
008 — Implausible Signal — Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 6
Fault Frequency: 2
Reset counter: 45
Mileage: 65837 km
Time Indication: 0
Date: 2016.03.12
Time: 19:32:31

——————————————————————————-
Address 09: Cent. Elect. (J519) Labels: 8K0-907-063.clb
Part No SW: 8K0 907 063 P HW: 8K0 907 063 P
Component: BCM1 1.0 H30 0392
Revision: 10030001 Serial number: 00000000819782
Coding: 260050914034AF010001000300001D0D0F1C070806010101000000
Shop #: WSC 06335 000 00000
VCID: 3C771358BF9307DE62-8068

Subsystem 1 — Part No SW: 8K1 955 119 A HW: 8T1 955 119 Labels: 1KX-955-119.CLB
Component: WWS 071010 H06 0070
Coding: 00FD11

Subsystem 2 — Part No SW: 8K0 955 559 HW: 8K0 955 559 Labels: 8K0-955-559.CLB
Component: RLS H04 0003
Coding: 025028

Subsystem 3 — Part No SW: 8K0 941 531 AL HW: 8K0 941 531 AL
Component: E1 — LDS H08 0090

1 Fault Found:
01314 — Engine Control Module
004 — No Signal/Communication — Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 6
Fault Frequency: 1
Reset counter: 45
Mileage: 65837 km
Time Indication: 0
Date: 2016.03.12
Time: 19:43:00

——————————————————————————-
Address 10: Park/Steer Assist (J446) Labels: 8K0-919-475.clb
Part No SW: 8K0 919 475 R HW: 8K0 919 475 A
Component: PARKHILFE 8K H06 0070
Revision: 11001001 Serial number: 50901028501120
Coding: 100203
Shop #: WSC 06335 000 00000
VCID: 489F7F88FB4B5B7EF6-801C

1 Fault Found:
01314 — Engine Control Module
004 — No Signal/Communication — Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 6
Fault Frequency: 2
Reset counter: 45
Mileage: 65837 km
Time Indication: 0
Date: 2016.03.12
Time: 19:32:36

Freeze Frame:
Temperature: 21.0°C

——————————————————————————-
Address 15: Airbags (J234) Labels: 8K0-959-655.clb
Part No SW: 8K0 959 655 J HW: 8K0 959 655 J
Component: AirbagVW-AU10 H41 0610
Serial number: 003GKD0L76AA
Coding: 30343435363030303030554A304C384B3053
Shop #: WSC 06335 000 00000
ASAM Dataset: EV_AirbaECUVWAUDI010 003010
ROD: EV_AirbaECUVWAUDI010_AU48.rod
VCID: 44876BB8CF637F1E1A-8010

Crash sensor for side airbag; driver side:
Serial number: 6334MSME580561356

Crash sensor for side airbag; front passenger side:
Serial number: 6344MSME58042E6CP

Crash sensor for side airbag; rear; driver side:
Serial number: 6352QSME17714626B

Crash sensor for side airbag; rear; passenger side:
Serial number: 6362QSME407442245

Crash sensor for front airbag; driver side:
Serial number: 63732SME48743930.

Crash sensor for front airbag; front passenger side:
Serial number: 63832SME7B743A3CE

No fault code found.

——————————————————————————-
Address 16: Steering wheel (J527) Labels: 8K0-953-568.clb
Part No SW: 8K0 953 568 F HW: 8K0 953 568 F
Component: Lenks.Modul H17 0014
Revision: ——— Serial number: 90372JJ800002
Coding: 000017
Shop #: WSC 06335 000 00000
VCID: 3D711E5CA4890ED655-8068

Component: E221 — MFL H02 0010

No fault code found.

——————————————————————————-
Address 17: Instruments (J285) Labels: 8T0-920-xxx-17.clb
Part No SW: 8K0 920 930 N HW: 8K0 920 930 N
Component: KOMBIINSTR. H25 0258
Revision: 00000000 Serial number: EJC32WEAA
Coding: 0F04100002000008000000
Shop #: WSC 06335 000 00000
VCID: 387F0F488BAB2BFE86-806C

1 Fault Found:
01314 — Engine Control Module
004 — No Signal/Communication — Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 6
Fault Frequency: 2
Reset counter: 45
Mileage: 65837 km
Time Indication: 0
Date: 2016.03.12
Time: 19:32:37

——————————————————————————-
Address 19: CAN Gateway (J533) Labels: 8T0-907-468.clb
Part No SW: 8T0 907 468 AB HW: 8T0 907 468 H
Component: GW-BEM 5CAN H06 0117
Revision: GB800053 Serial number: 5300G109238004
Coding: 00CF07
Shop #: WSC 06335 000 00000
VCID: 0109A2AC98F1AA3671-8054

Subsystem 1 — Part No SW: 8X0 915 181 HW: 8X0 915 181
Component: J367-BDM H07 0140

Subsystem 2 — Part No SW: 8K0 959 663 B HW: 8K0 959 663 B
Component: J532_DCDCStab H05 0006

2 Faults Found:
01314 — Engine Control Module
004 — No Signal/Communication — Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 2
Reset counter: 45
Mileage: 65837 km
Time Indication: 0
Date: 2016.03.12
Time: 19:32:37

Freeze Frame:
Bin. Bits: 10111
Voltage: 11.70 V
Count: 6
Bin. Bits: 10000
Time: 25.40 s

01312 — Powertrain Data Bus
004 — No Signal/Communication — Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 1
Fault Frequency: 53
Reset counter: 45
Mileage: 65837 km
Time Indication: 0
Date: 2016.03.12
Time: 19:32:39

Freeze Frame:
Bin. Bits: 10000
Voltage: 11.90 V
Count: 7
Bin. Bits: 10000

——————————————————————————-
Address 42: Door Elect, Driver (J386) Labels: 8K0-959-793.clb
Part No SW: 8K0 959 793 M HW: 8K0 959 793 M
Component: TSG FA H12 0357
Revision: Serial number: 0000011456115
Coding: 011C02204100410001
Shop #: WSC 06335 000 00000
VCID: 4A9B4580E547A96EE0-801E

No fault code found.

——————————————————————————-
Address 46: Central Conv. (J393) Labels: 8K0-907-064-46.clb
Part No SW: 8K0 907 064 CP HW: 8K0 907 064 CP
Component: BCM2 2.0 H04 0430
Revision: 00002001 Serial number: 0135966900
Coding: 0100062020B904408120023680000000
Shop #: WSC 06335 000 00000
VCID: 000FA7A893FBA33E7E-8054

1 Fault Found:
01314 — Engine Control Module
004 — No Signal/Communication — Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 6
Fault Frequency: 1
Reset counter: 45
Mileage: 65837 km
Time Indication: 0
Date: 2016.03.12
Time: 19:32:35

——————————————————————————-
Address 52: Door Elect, Pass. (J387) Labels: 8K0-959-792.clb
Part No SW: 8K0 959 792 M HW: 8K0 959 792 M
Component: TSG BF H12 0357
Revision: Serial number: 0000011458736
Coding: 011C02204100410001
Shop #: WSC 06335 000 00000
VCID: 49997A8CE041A276E9-801C

No fault code found.

——————————————————————————-
Address 53: Parking Brake (J540) Labels: 8K0-907-801-V1.clb
Part No SW: 8K0 907 801 H HW: 8K0 907 801 H
Component: EPB Audi B8 H09 0100
Revision: 00000003 Serial number: 00000000759455
Shop #: WSC 00000 000 00000
VCID: 34673B7897C3CF9EAA-8060

1 Fault Found:
01314 — Engine Control Module
004 — No Signal/Communication — Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 4
Fault Frequency: 2
Reset counter: 45
Mileage: 65837 km
Time Indication: 0
Date: 2016.03.12
Time: 19:32:36

Freeze Frame:
Voltage: 11.80 V
Count: 64
Speed: 0.0 km/h
Hex Value: 0x0270
Hex Value: 0x0001
Hex Value: 0x0101

——————————————————————————-
Address 55: Headlight Range Labels: 8K0-907-357.clb
Part No: 8K5 907 357 B
Component: Dynamische LWR H02 0010
Revision: 00000001 Serial number:
Coding: 0000004
Shop #: WSC 06335 000 00000
VCID: 39790A4C70A132F679-806C

1 Fault Found:
01314 — Engine Control Module
004 — No Signal/Communication — Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 2
Reset counter: 45
Mileage: 65837 km
Time Indication: 0
Date: 2016.03.12
Time: 19:32:32

——————————————————————————-
Address 56: Radio (J503) Labels: 8Tx-035-1xx-56.clb
Part No SW: 8T1 035 186 P HW: 8T1 035 186 P
Component: Concert3 H07 0350
Revision: 00000011 Serial number: AUZ5Z6J1475895
Coding: 0500048004020500015B070000
Shop #: WSC 06335 000 00000
VCID: 44876BB8C7637F1E1A-8010

Subsystem 1 — Part No SW: 8T0 919 603 F HW: 8T0 919 603 F
Component: Display

1 Fault Found:
01314 — Engine Control Module
004 — No Signal/Communication — Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 6
Fault Frequency: 2
Reset counter: 45
Mileage: 65837 km
Time Indication: 0
Date: 2016.03.12
Time: 19:32:37

——————————————————————————-
Address 62: Door, Rear Left (J388) Labels: 8K0-959-795.clb
Part No SW: 8K0 959 795 F HW: 8K0 959 795 F
Component: TSG HL H11 0357
Revision: Serial number: 0000109201912
Coding: 010C02204000210001
Shop #: WSC 06335 000 00000
VCID: 458176BCCC5946160D-8010

No fault code found.

——————————————————————————-
Address 72: Door, Rear Right (J389) Labels: 8K0-959-795.clb
Part No SW: 8K0 959 795 F HW: 8K0 959 795 F
Component: TSG HR H11 0357
Revision: Serial number: 0000109202023
Coding: 010C02204000210001
Shop #: WSC 06335 000 00000
VCID: 458176BCCC5946160D-8010

Источник

This post may contain affiliate links. Please read my disclosure for more info.

After only three weeks of ownership I had to say goodbye to Monty (my Audi S5 Sportback).

On the morning commute into work a yellow headlight warning light flagged up in the Driver Instrument System (DIS) screen. The DIS also showed the following warning text:

«Headlight Range Control Defective!»

I didn’t catch an image of the display showing the warning message as it only shows for a few seconds, but here’s how the Headlight Range Control Defective warning light looks.

Audi S5 B8 Headlight Range Control Defective Warning Light Message

And here’s a mock up of how the warning message appears.

Audi VAG Headlight Range Control Defective message yellow warning light 00471

And here’s a mock up of how the warning message appears.

Audi VAG Headlight Range Control Defective message yellow warning light 00471

How to Call Up Audi Fault Messages In The Instrument Cluster (DIS)

Turns out, having done some research into what the warning lights meant, I found this quote in the owner’s manual;

«A red or yellow symbol appearing in the instrument cluster display is normally accompanied by a corresponding message. The message will disappear from the display after about 5 seconds. If required, you can call up the message again by briefly pressing the SET button».

Headlight Range Control Defective! Warning Symptoms

As this happened in March, it was still very much dark during my commute. Unfortunately, this meant for the most part I couldn’t see where I was going. By default, when the Headlight Range Control Defective warning appears, the lamps move to the lowest position (or at least they did on my car), i.e. pointing at the floor about 10m in front of the car. I presume to avoid startling on coming traffic.

Not Again…

After the pain of replacing the turbos on my N54 engine’d BMW E92 335i in the first week of ownership, at a personal cost of just under £3k, it made me swear I’d never buy private again. Fortunately, that lesson had paid off, I called Andy Page (the dealer I bought the car from) and arranged that I would take the car to M G S Motors in Corby (this is where he sends all his cars for repair), to be fixed under warranty.

Headlight Range Control Defective! Audi / VAG Fault Codes

Being the curious type, and wanting to give Mick (the owner of M G S Motors) a fighting chance of diagnosing the issue quickly, I borrowed my mates Carista Bluetooth OBD2 adapter and app* (version 3.5) to run off the fault codes, if there were any.

Here’s the data that the Carista app spat out:

Headlight aiming
Part #: 8K0907357D
Coding: 3 (decimal)
Component: Dynamische LWR
Fault codes:
00471 Controller for EGD electronically regulated absorption (J250)

Suspension
Part #: 8R0907364B
Coding: 050181 (hex)
Component: DAEMPFUNGS-SG
Fault codes:
00774 Level Control System Sensor — Left Rear (G76)
03262 Comfort Limitation

Headlight Range Control Sensors

There are a number of level control system sensors on the car, one on each of the suspension arms. According to Carista, my problem was with the Left Rear.

Which part numbers you need will depend on the model year of your car and the suspension system you’ve got fitted (air suspension vs electronically controlled for example).

To find the right part number put your car’s details into realoem.

For my 2010 B8 S5 Sportback with the optional electronic Damper Control, the part numbers for the Rear Left Headlight Range Control Sensor is 8K0941309D.

The sensors can cost anywhere between £80-120.

Fixed

I dropped the car off and left the keys with Mick. After a day’s diagnosis, he’d confirmed it was the level control sensor that was at fault. Frustratingly, Audi sent him the wrong replacement part, which pushed out the repair another day.

One, agonisingly long, week later I was able to pick the car up. I started it up and confirmed the error had gone and, after a short test drive of a few miles (the warning light was appearing within 1 mile before), I was convinced the problem had been solved and went off on my way home.

On the one hand I was glad the problem was resolved, but equally disappointed the problem had arisen in the first place.

Let me know in the comments below if you’ve had this problem and had to deal with it yourself, any pointers you could give others?

Have you been as unlucky as I have with your cars, have they had faults within the first few weeks of ownership?

Don’t forget to subscribe using the Follow by Email widget in the top right for plenty more content to come.

Фото в бортжурнале Audi A4 (B8)

Всем привет. Случилась такая проблема. Еду на работу а мне на пол пути выскакивает такая ошибка headlight range control defective audi a4. Теперь когда машину заводишь фары не отпускаются и не поднимаются. Подскажите что проверить первым делом, а если можно то с фото что бы было понятней.Фото спер с нета, с телефона скидывать долго, но суть та же. Всем спасибо и удачи на дорогах.

Комментарии
14

Войдите или зарегистрируйтесь, чтобы писать комментарии, задавать вопросы и участвовать в обсуждении.

Проверь предохранитель с левой стороны передней панели сними крышку и сними и поставь предохранитель на место может помочь. У меня такое было когда попал в ямку не большую и удара не было но вот такой прикол появился после снятия и установки назад предохранителя все работает по сей день.

была подобная ситуация решилось заменой датчика и адаптацие в сервисе взяли что то около 3 рублей за все )

Аналогичная проблема. Причина выход из строя одного из датчиков положения кузова, который регулирует угол наклона фар в зависимости от загрузки авто. Стоиомть нового от 5000. На разборках ищу уже пол года, не могу найти.

После снятия-подключеия одной из фар выскакивала аналогичная ошибка -фары в пол. Прчиной конечно может быть привет от датчиков положения кузова(первая же мысль). Но у меня оказалось все банальней. Васей скинул ошибку и поехал радоваться жизни дальше. Так, что преждевременную панику пока можно отбросить.

Привет, кабель приобрети, а вообще скорее всего передний.

накрылся датчик положения кузова.
сам катаюсь с такой проблемой уже 2 мес. Буду менять.
какой именно (задний или передний) не сказать, пока кабелем не проверить.

Спасибо за ответ. Но кабелем еще не обжился к сожалению.

это первое что надо покупать, когда владеешь ВАГом.
Спроси у местных или к ОД, но там денег возьмут.
В основном у всех помирает передний (у меня так же).
То, что это датчик — 99%. Больше нечему.

А меня нету спереди датчика…только сзади почему то…

Этого быть не может. По левой стороне смотрел?

Я на передке мортезы с шаровой менял…не мог я не заметить т.к. там все разбираешь

Да с обеих! я так же вижу по тому же экзисту что спереди есть датчик…но у меня его нету и не знаю почему

Удалось найти причину несоответствия наличия датчика по программе и отсутствия оного в реальности?

  1. 19 июл 2008
    854
    Латвия
    Audi A6 3.0 2013

    Вот такие ошибки

    Address 55: Xenon Range Labels: 8P0-907-357.lbl
    Part No: 8P0 907 357 A
    Component: Dynamische LWR H01 0010
    Revision: 00000000 Serial number:
    Coding: 0000003
    Shop #: WSC 02327 785 00200

    2 Faults Found:
    00497 — Sensor for Vehicle Leveling; Rear
    008 — Implausible Signal — MIL ON
    Freeze Frame:
    Fault Status: 11101000
    Fault Priority: 2
    Fault Frequency: 2
    Reset counter: 49
    Mileage: 141240 km
    Time Indication: 0
    Date: 2010.08.05
    Time: 16:17:30

    00497 — Sensor for Vehicle Leveling; Rear
    010 — Open or Short to Plus — Intermittent
    Freeze Frame:
    Fault Status: 11101000
    Fault Priority: 2
    Fault Frequency: 2
    Reset counter: 49
    Mileage: 141240 km
    Time Indication: 0
    Date: 2010.08.05
    Time: 16:17:30

    замена или ремонт
    интересно то что появилось это второй раз после подключения ВАГ .В первый раз прошло само на следующий день, теперь не хочет.

    Вложения:


    Stop hovering to collapse…
    Click to collapse…


    Hover to expand…
    Нажмите, чтобы раскрыть…

  2. Команда форума

    сдох датчик положения на задней оси, либо его проводка.
    с пробегом 140ткм неудивительно.

  3. 19 июл 2008
    854
    Латвия
    Audi A6 3.0 2013

    сколько денег стоит и что насчет ремонта ??


    Stop hovering to collapse…
    Click to collapse…


    Hover to expand…
    Нажмите, чтобы раскрыть…

  4. 31 янв 2009
    8.344
    A6(4F)/3.2FSI(q)

    Датчики на автомобиле.

    [​IMG]

    [​IMG]

  5. Команда форума

    ближайший дилер проведет диагностику и расскажет стоимость.
    затем можно купить требуемое и починить в более доступном автосервисе.

  6. 6 окт 2010
    75
    A6 3.0 quattro

    Здраствуйте.Народ у меня та же самая ошибка headlight range control defective.Фары вообще не двигаются не могу понять, что случилось,так и купил с этой ошибкой.Еще не могу понять на блок фарах есть фишки в которые нечего не вставлено,фишки эти ближе к радиатору.подсткажите где можно.кроме офицалов,разобратся с этим.Владею первой ауди не знаю сервисов вообще

  7. 6 окт 2010
    75
    A6 3.0 quattro

    А такие датчики положения только с пневматикой стоят.

  8. 31 янв 2009
    8.344
    A6(4F)/3.2FSI(q)
  9. Команда форума

    Ибо рычаги подвески и стабилизатор одинаковые.

  10. 19 июл 2008
    854
    Латвия
    Audi A6 3.0 2013

    решил проблему сам.
    снял,разобрал,почистил,склеил,адаптировал-теперь работает.


    Stop hovering to collapse…
    Click to collapse…


    Hover to expand…
    Нажмите, чтобы раскрыть…

  11. 19 июл 2008
    854
    Латвия
    Audi A6 3.0 2013

    брат , сколько время уже прошло


    Stop hovering to collapse…
    Click to collapse…


    Hover to expand…
    Нажмите, чтобы раскрыть…

  12. 11 фев 2007
    2.846
    Москва
    Q7 PPI ICE

    Появилась данная ошибка после проведения ТО, не у дилера, а в сервисе, который здесь в клубе рекомендуют. Возможен такой вариант, что мастера сами намудрили что-то с датчиком, дабы дополнительно развести на бабло?


    Stop hovering to collapse…
    Click to collapse…


    Hover to expand…
    Нажмите, чтобы раскрыть…

  13. 11 дек 2014
    4
    A6/C6 3.0TDIQ

    Добрый вечер. Вы можете сказать, как адаптируется датчик?

  14. 11 фев 2007
    2.846
    Москва
    Q7 PPI ICE

    Раз всплыла эта тема, то отвечу на свой же вопрос. Вдруг кому-то понадобится.
    У меня проблема оказалась в том, что в ВАСЕ стояла галочка напротив пункта проверки территории использования автомобиля. Полагаю, чтобы фары подстраивались под лево- или правостороннее движение. Убрал галочку — ошибка исчезла.


    Stop hovering to collapse…
    Click to collapse…


    Hover to expand…
    Нажмите, чтобы раскрыть…

  15. Ребята, а вообще можете подсказать за что эта функция отвечает?
    После ремонта передней фары мне официальный дилер выдал автомобиль с такой ошибкой.
    Я им предъявил этот пункт, на что они меня отправили в другой их сервис, где могут исправить эту ошибку.
    Мне вот кажется, у меня адаптивные фары были, а сейчас фара светит как дальний свет. Может это они накосячили?!

Аватара пользователя

shtepa

Ветеран Клуба Писатель Клуба

Почетный член Клуба
Сообщения: 11741
Зарегистрирован: Ср сен 26, 2007 8:21 am
Награды: 2
Репутация: 129
Модель: q7
Мотор: CASA
Город: 61 RUS

headlight range control defective

как с этим бороться ? Что это вообще ? На приборке светится.

Аватара пользователя

Akin

Президент Клуба
Сообщения: 26814
Зарегистрирован: Пн авг 27, 2007 2:01 am
Репутация: 574
Модель: ___
Мотор: ___
Город: Королев
Имя: Владислав
Откуда: Москва

headlight range control defective

Сообщение

Akin » Вт янв 16, 2018 6:57 pm

Не работает автокорректор фар. 1pardon76

Выложить ошибки по 09, 34 и 55 блокам.

Последний раз редактировалось Akin Вт янв 16, 2018 7:02 pm, всего редактировалось 1 раз.

Аватара пользователя

shtepa

Ветеран Клуба Писатель Клуба

Почетный член Клуба
Сообщения: 11741
Зарегистрирован: Ср сен 26, 2007 8:21 am
Награды: 2
Репутация: 129
Модель: q7
Мотор: CASA
Город: 61 RUS

Аватара пользователя

Akin

Президент Клуба
Сообщения: 26814
Зарегистрирован: Пн авг 27, 2007 2:01 am
Репутация: 574
Модель: ___
Мотор: ___
Город: Королев
Имя: Владислав
Откуда: Москва

headlight range control defective

Сообщение

Akin » Ср янв 17, 2018 9:18 pm

Похоже, что сгнили или отвалились блоки управления фар.

Попробуй провести адаптацию фар, если не пройдет — нужно смотреть блоки на фарах, те, что черные.

This post may contain affiliate links. Please read my disclosure for more info.

After only three weeks of ownership I had to say goodbye to Monty (my Audi S5 Sportback).

On the morning commute into work a yellow headlight warning light flagged up in the Driver Instrument System (DIS) screen. The DIS also showed the following warning text:

«Headlight Range Control Defective!»

I didn’t catch an image of the display showing the warning message as it only shows for a few seconds, but here’s how the Headlight Range Control Defective warning light looks.

Audi S5 B8 Headlight Range Control Defective Warning Light Message

And here’s a mock up of how the warning message appears.

Audi VAG Headlight Range Control Defective message yellow warning light 00471

And here’s a mock up of how the warning message appears.

Audi VAG Headlight Range Control Defective message yellow warning light 00471

How to Call Up Audi Fault Messages In The Instrument Cluster (DIS)

Turns out, having done some research into what the warning lights meant, I found this quote in the owner’s manual;

«A red or yellow symbol appearing in the instrument cluster display is normally accompanied by a corresponding message. The message will disappear from the display after about 5 seconds. If required, you can call up the message again by briefly pressing the SET button».

Headlight Range Control Defective! Warning Symptoms

As this happened in March, it was still very much dark during my commute. Unfortunately, this meant for the most part I couldn’t see where I was going. By default, when the Headlight Range Control Defective warning appears, the lamps move to the lowest position (or at least they did on my car), i.e. pointing at the floor about 10m in front of the car. I presume to avoid startling on coming traffic.

Not Again…

After the pain of replacing the turbos on my N54 engine’d BMW E92 335i in the first week of ownership, at a personal cost of just under £3k, it made me swear I’d never buy private again. Fortunately, that lesson had paid off, I called Andy Page (the dealer I bought the car from) and arranged that I would take the car to M G S Motors in Corby (this is where he sends all his cars for repair), to be fixed under warranty.

Headlight Range Control Defective! Audi / VAG Fault Codes

Being the curious type, and wanting to give Mick (the owner of M G S Motors) a fighting chance of diagnosing the issue quickly, I borrowed my mates Carista Bluetooth OBD2 adapter and app* (version 3.5) to run off the fault codes, if there were any.

Here’s the data that the Carista app spat out:

Headlight aiming
Part #: 8K0907357D
Coding: 3 (decimal)
Component: Dynamische LWR
Fault codes:
00471 Controller for EGD electronically regulated absorption (J250)

Suspension
Part #: 8R0907364B
Coding: 050181 (hex)
Component: DAEMPFUNGS-SG
Fault codes:
00774 Level Control System Sensor — Left Rear (G76)
03262 Comfort Limitation

Headlight Range Control Sensors

There are a number of level control system sensors on the car, one on each of the suspension arms. According to Carista, my problem was with the Left Rear.

Which part numbers you need will depend on the model year of your car and the suspension system you’ve got fitted (air suspension vs electronically controlled for example).

To find the right part number put your car’s details into realoem.

For my 2010 B8 S5 Sportback with the optional electronic Damper Control, the part numbers for the Rear Left Headlight Range Control Sensor is 8K0941309D.

The sensors can cost anywhere between £80-120.

Fixed

I dropped the car off and left the keys with Mick. After a day’s diagnosis, he’d confirmed it was the level control sensor that was at fault. Frustratingly, Audi sent him the wrong replacement part, which pushed out the repair another day.

One, agonisingly long, week later I was able to pick the car up. I started it up and confirmed the error had gone and, after a short test drive of a few miles (the warning light was appearing within 1 mile before), I was convinced the problem had been solved and went off on my way home.

On the one hand I was glad the problem was resolved, but equally disappointed the problem had arisen in the first place.

Let me know in the comments below if you’ve had this problem and had to deal with it yourself, any pointers you could give others?

Have you been as unlucky as I have with your cars, have they had faults within the first few weeks of ownership?

Don’t forget to subscribe using the Follow by Email widget in the top right for plenty more content to come.

  • Home
  • Forum
  • Main Model-Line Discussion
  • B8 A4
  • Headlight Range Control Defective

  1. 06-28-2017 01:15 PM

    #1

    amanp786 is offline


    Established Member

    Two Rings


    Right after Carista updated their app and added ADS feature on our B8, I couldn’t wait any longer so I plugged in my Carista device and enabled ADS (part 1 & part 2) and also turned on Engine, Suspension and steering options to show on my ADS menu. Right when I made these changes my car gave me an error «Headlight Range Control defective». I am not sure if these has to do with enabling ADS using Carista (keep in mind, my car didn’t come with Drive Select button) or if these has to do with me changing my headlight bulb one week ago. I installed Philips D3S Standard Xenon HID Headlight Bulb. My brain is telling me that since my car doesn’t support Drive Select, I shouldn’t have enabled ADS. How are headlights connected with ADS feature? Below is a link to the error pic and also a pic of what I enabled in carista for ADS.

    https://ibb.co/kNFgdQ
    https://ibb.co/iiz7JQ


  2. 06-28-2017 01:22 PM

    #2

    elscotto80 is offline


    Veteran Member

    Four Rings


    I think it’s looking for the headlight controller for cornering, which is probably connected to ADS. Mine had this stored as a soft code, same with the charisma switch error. Really no big deal. It’s looking for something that’s not there and throwing an error.

    Sent from my Pixel using Tapatalk


  3. 06-28-2017 01:34 PM

    #3

    amanp786 is offline


    Established Member

    Two Rings


    Scott, my headlight move up and down when I turn my car on, so your right its no big deal. I wonder since I don’t have Drive Select, will enabling ADS really do anything in terms of suspension & steering. However I read on different forums that this would be fixed using VAG-COM, its just needs to be leveled again. I wonder if I can do this using the Carista app


  4. 06-28-2017 01:39 PM

    #4

    elscotto80 is offline


    Veteran Member

    Four Rings


    Ah, I didn’t think you had the auto levelers, my bad. As far as ADS goes, I enabled in vagcom and noticed a difference. I set the engine and steering to the most agressive. Maybe you need to find out how to do the basic setting for ads now that you have enabled it? Sorry I am not more help.

    Sent from my Pixel using Tapatalk


  5. 06-28-2017 02:21 PM

    #5

    amanp786 is offline


    Established Member

    Two Rings


    Scott, you answered one of my question regarding enabling ADS and not having Drive Select button. When you say you set your car to most aggressive, which setting are you talking about, Comfort or Auto or Dynamic under ADS? I would also like to feel the difference when I change my ADS settings

    Last edited by amanp786; 06-28-2017 at 02:36 PM.


  6. 06-28-2017 02:27 PM

    #6

    elscotto80 is offline


    Veteran Member

    Four Rings


    Dynamic sounds right. Google Audi enthusiast…that guys page has a good deal of info on ADS.

    Sent from my Pixel using Tapatalk


  7. 06-28-2017 03:13 PM

    #7

    mecg is offline


    Senior Member

    Two Rings

    mecg's Avatar


    I got the same error message after enabling all of the ADS with Carista and VCDS and the only fix to turn off the message was to disable the steering part of ADS and then turn the car off and then back on. I only have the Engine and Transmission parts of ADS turned on now (but had to use VCDS to actually do it). Car automatically goes straight into Sport mode when I shift into drive and the throttle is quite peppy.

    2013 Audi A4 quattro Prem, ZF8, APR Stage 2+ 93/E85 Tune + Cast Downpipe/HFC, R8 coils, aFe Dry Pro, Eurocode Intercooler pipe, Turbo Muffler Delete, Fitch Fuel Catalyst, RS Grille, Tinted windows, Audi logo puddle lights, Interior LEDs, VCDS tweaks, 18×8 Andros R9 Wheels w/ Michelin Pilot Super Sports
    2008 Saab 9-5 2.3T BCB�, K&N, Fitch Fuel Catalyst, Interior LEDs


  8. 06-28-2017 04:12 PM

    #8

    amanp786 is offline


    Established Member

    Two Rings


    To understand what this does better for cars without Drive Select, it just shifts into S mode when the car is on D mode, saving us form doing it manually? I was under impression that it changes the feel of steering and suspension on D mode. I wonder how does it effect your mpg


  9. 06-28-2017 04:20 PM

    #9

    sriyegna is offline


    Established Member

    Two Rings


    Quote Originally Posted by amanp786
    View Post

    Scott, my headlight move up and down when I turn my car on, so your right its no big deal. I wonder since I don’t have Drive Select, will enabling ADS really do anything in terms of suspension & steering. However I read on different forums that this would be fixed using VAG-COM, its just needs to be leveled again. I wonder if I can do this using the Carista app

    In addition to up and down, I believe in some models they can also turn left or right to help point the light towards your turn.

    — — — Updated — — —

    Quote Originally Posted by amanp786
    View Post

    To understand what this does better for cars without Drive Select, it just shifts into S mode when the car is on D mode, saving us form doing it manually? I was under impression that it changes the feel of steering and suspension on D mode. I wonder how does it effect your mpg

    I enabled ADS and if I set steering to Auto instead of Comfort, it stiffens up.


  10. 06-28-2017 04:51 PM

    #10

    ELaw is offline


    Veteran Member

    Three Rings


    Quote Originally Posted by amanp786
    View Post

    I was under impression that it changes the feel of steering and suspension on D mode.

    Both depend on the hardware installed in the car. Steering feel will change if your car has servotronic. Suspension feel would change if it came with the ADS package, but if that was the case naturally you wouldn’t have to activate it yourself. So unless someone has retrofitted the special shocks and related hardware, the suspension feel will not change.


  11. 06-29-2017 08:45 AM

    #11

    toast88 is offline


    Established Member

    Two Rings

    toast88's Avatar


    So you enabled ADS through the carista app, but your car did not come with ADS? I am understanding that correctly? If so then , yea enabling it while not equipped for it probably caused the range control warning to come up.
    My car has done that ever since I installed coils. I just ignore it, although i believe ECS sells a part that is supposed to fix the leveling sensor when lowered.


  12. 06-29-2017 08:48 AM

    #12

    Lambda13 is offline


    Veteran Member

    Four Rings

    Lambda13's Avatar


    I get the same error because the headlights I have installed have AFS but my car was not equipped with it. I believe there are sensors that you would have to wire in to make them work.


  13. 06-29-2017 09:36 AM

    #13

    todor is offline


    Senior Member

    Two Rings


    Quote Originally Posted by mecg
    View Post

    I got the same error message after enabling all of the ADS with Carista and VCDS and the only fix to turn off the message was to disable the steering part of ADS and then turn the car off and then back on. I only have the Engine and Transmission parts of ADS turned on now (but had to use VCDS to actually do it). Car automatically goes straight into Sport mode when I shift into drive and the throttle is quite peppy.

    Just out of curiosity, why did you have to use VCDS? Carista has the individual settings for the engine/transmission, steering, and suspension. Did those not work for you in Carista?

    As far as the headlight range control error is concerned, we’ve gotten reports that turning on the steering customization causes that fault (presumably, on cars that don’t have electronically-controllable suspension), but turning it off again gets rid of the fault (or allows you to clear it through the diagnostics part of the Carista app). Can you guys share additional experience on that?


  14. 06-29-2017 10:35 AM

    #14

    mecg is offline


    Senior Member

    Two Rings

    mecg's Avatar


    Quote Originally Posted by todor
    View Post

    Just out of curiosity, why did you have to use VCDS? Carista has the individual settings for the engine/transmission, steering, and suspension. Did those not work for you in Carista?

    As far as the headlight range control error is concerned, we’ve gotten reports that turning on the steering customization causes that fault (presumably, on cars that don’t have electronically-controllable suspension), but turning it off again gets rid of the fault (or allows you to clear it through the diagnostics part of the Carista app). Can you guys share additional experience on that?

    Hi todor — My Premium A4 doesn’t have Nav/MMI, so I can’t enable the hidden menu in order to access the ADS selections in the car after turning them on in Carista. Thus, I have to use VCDS to do the coding manually.

    2013 Audi A4 quattro Prem, ZF8, APR Stage 2+ 93/E85 Tune + Cast Downpipe/HFC, R8 coils, aFe Dry Pro, Eurocode Intercooler pipe, Turbo Muffler Delete, Fitch Fuel Catalyst, RS Grille, Tinted windows, Audi logo puddle lights, Interior LEDs, VCDS tweaks, 18×8 Andros R9 Wheels w/ Michelin Pilot Super Sports
    2008 Saab 9-5 2.3T BCB�, K&N, Fitch Fuel Catalyst, Interior LEDs


  15. 06-29-2017 10:41 AM

    #15

    todor is offline


    Senior Member

    Two Rings


    Quote Originally Posted by mecg
    View Post

    Hi todor — My Premium A4 doesn’t have Nav/MMI, so I can’t enable the hidden menu in order to access the ADS selections in the car after turning them on in Carista. Thus, I have to use VCDS to do the coding manually.

    I see. Are you referring to the key-specific defaults for the ADS mode? We actually have those in beta in Carista right now. Interested in giving them a try?


  16. 06-29-2017 10:45 AM

    #16

    mecg is offline


    Senior Member

    Two Rings

    mecg's Avatar


    Quote Originally Posted by todor
    View Post

    I see. Are you referring to the key-specific defaults for the ADS mode? We actually have those in beta in Carista right now. Interested in giving them a try?

    Oh? I didn’t know that. I am a beta tester for you folks already but didn’t see that change since I attempted to test the ADS settings in the beta I had at the time. I will take a look at that over the coming weekend. Thanks!

    2013 Audi A4 quattro Prem, ZF8, APR Stage 2+ 93/E85 Tune + Cast Downpipe/HFC, R8 coils, aFe Dry Pro, Eurocode Intercooler pipe, Turbo Muffler Delete, Fitch Fuel Catalyst, RS Grille, Tinted windows, Audi logo puddle lights, Interior LEDs, VCDS tweaks, 18×8 Andros R9 Wheels w/ Michelin Pilot Super Sports
    2008 Saab 9-5 2.3T BCB�, K&N, Fitch Fuel Catalyst, Interior LEDs


  17. 06-29-2017 01:49 PM

    #17

    amanp786 is offline


    Established Member

    Two Rings


    Quote Originally Posted by todor
    View Post

    Just out of curiosity, why did you have to use VCDS? Carista has the individual settings for the engine/transmission, steering, and suspension. Did those not work for you in Carista?

    As far as the headlight range control error is concerned, we’ve gotten reports that turning on the steering customization causes that fault (presumably, on cars that don’t have electronically-controllable suspension), but turning it off again gets rid of the fault (or allows you to clear it through the diagnostics part of the Carista app). Can you guys share additional experience on that?

    Todor,

    After receiving the error, I followed what mecg did, I disable the steering option and the headlight range control error didn’t go away. I am going to stop by the dealership and have them look at it since my car is under warranty.

    Quote Originally Posted by toast88
    View Post

    So you enabled ADS through the carista app, but your car did not come with ADS? I am understanding that correctly? If so then , yea enabling it while not equipped for it probably caused the range control warning to come up.
    My car has done that ever since I installed coils. I just ignore it, although i believe ECS sells a part that is supposed to fix the leveling sensor when lowered.

    I drove 50 miles yesterday after I enabled ADS using carista and I didn’t feel any difference when I changed from Comfort to Auto to Dynamic. I was messing around on different settings and didn’t notice any difference. So my guess is that I need the hardware in my car, without hardware turning on ADS from carista is not doing much. I have a 2013 B8.5 AWD w/ Nav MMI 3G+ without Drive Select button


  18. 06-29-2017 01:59 PM

    #18

    amanp786 is offline


    Established Member

    Two Rings


    Quote Originally Posted by mecg
    View Post

    Hi todor — My Premium A4 doesn’t have Nav/MMI, so I can’t enable the hidden menu in order to access the ADS selections in the car after turning them on in Carista. Thus, I have to use VCDS to do the coding manually.

    I used Carista to turn on ADS than went in hidden menu to turn on Charisma, I followed what Carista prompted after turning on ADS


  19. 06-29-2017 02:33 PM

    #19

    elscotto80 is offline


    Veteran Member

    Four Rings


    Quote Originally Posted by amanp786
    View Post

    Todor,

    After receiving the error, I followed what mecg did, I disable the steering option and the headlight range control error didn’t go away. I am going to stop by the dealership and have them look at it since my car is under warranty.

    I drove 50 miles yesterday after I enabled ADS using carista and I didn’t feel any difference when I changed from Comfort to Auto to Dynamic. I was messing around on different settings and didn’t notice any difference. So my guess is that I need the hardware in my car, without hardware turning on ADS from carista is not doing much. I have a 2013 B8.5 AWD w/ Nav MMI 3G+ without Drive Select button

    I would like to hear what the dealer had to say after you tinkered with the settings. I suspect they will just «reset» the entire car or that module back to original/factory.

    Sent from my Pixel using Tapatalk


  20. 06-29-2017 02:54 PM

    #20

    todor is offline


    Senior Member

    Two Rings


    Quote Originally Posted by amanp786
    View Post

    Todor,

    After receiving the error, I followed what mecg did, I disable the steering option and the headlight range control error didn’t go away. I am going to stop by the dealership and have them look at it since my car is under warranty.

    I drove 50 miles yesterday after I enabled ADS using carista and I didn’t feel any difference when I changed from Comfort to Auto to Dynamic. I was messing around on different settings and didn’t notice any difference. So my guess is that I need the hardware in my car, without hardware turning on ADS from carista is not doing much. I have a 2013 B8.5 AWD w/ Nav MMI 3G+ without Drive Select button

    Try disabling the suspension option, not just the steering one. Then, clear all fault codes with Carista. Hopefully that’ll do it.

    If you do go to the dealer, I recommend setting all ADS-related customizations in Carista back to their original values in advance.


  21. 07-13-2017 12:12 PM

    #21

    Crislzno is offline


    Active Member

    One Ring

    Crislzno's Avatar


    I got the same code! Went into the diagnostic part of carista and reset it. Problem gone! Hope this helps!

    Sent from my VS987 using Audizine mobile app


  22. 07-25-2017 05:54 PM

    #22

    don_tm is offline


    Registered Member

    One Ring


    Quote Originally Posted by Crislzno
    View Post

    I got the same code! Went into the diagnostic part of carista and reset it. Problem gone! Hope this helps!

    Sent from my VS987 using Audizine mobile app

    Same here as well. Except once I reset the fault, the headlights do not go up and down anymore when you switch them on. They stay static. As a quick test, I used Carista to activate the use high beams as day lights. Once activated, the headlights immediately responded with the dynamic up and down movement that is supposed to happen. However, after turning this tweak off and restarting ignition, and switching headlights on normally, lights remain static and don’t move. Any ideas?


  23. 11-29-2017 07:46 PM

    #23

    street2gen is offline


    Veteran Member

    Three Rings

    street2gen's Avatar


    Has anybody come up with more answers on this…. I’ve got same message and fault

    Headlight aiming
    Part #: 8K0907357D
    Coding: 5 (decimal)
    Component: Dynamische LWR
    Fault codes:
    00471 Controller for EGD electronically regulated absorption (J250)


  24. 11-30-2017 06:25 AM

    #24

    todor is offline


    Senior Member

    Two Rings


    Quote Originally Posted by street2gen
    View Post

    Has anybody come up with more answers on this…. I’ve got same message and fault

    Headlight aiming
    Part #: 8K0907357D
    Coding: 5 (decimal)
    Component: Dynamische LWR
    Fault codes:
    00471 Controller for EGD electronically regulated absorption (J250)

    Yeah, that’s a typical case of this being caused by enabling the ADS suspension menu on a car that doesn’t have dynamic suspension. So just revert that customization in Carista and this should go away (clear the fault with Carista if it doesn’t go away on its own).


  25. 11-30-2017 07:52 AM

    #25

    street2gen is offline


    Veteran Member

    Three Rings

    street2gen's Avatar


    yeah…… i posted this in the wrong section i actually have an S4 with dynamic suspension. Ill have to make a new post over there unless you can offer any insight???


  26. 11-30-2017 10:08 AM

    #26

    todor is offline


    Senior Member

    Two Rings


    I see. No need to post elsewhere. Well, try disabling this setting anyway. I assume it wasn’t enabled by default for you, right? (don’t worry, you won’t lose your ADS, as long as you don’t disable some customization that was enabled from the factory). If you’d like us to confirm your history of changes, please open the Carista app and use «Report a problem» from the slide-out menu from the left. Mention that you’ve posted about this on audizine so we can connect the two.


  27. 11-30-2017 10:24 AM

    #27

    street2gen is offline


    Veteran Member

    Three Rings

    street2gen's Avatar


    I believe i actually have an issue with either one of the leveling arms, i didnt enable anything just came here (by accident) after seeing the headlight control module error on the dash.


Bookmarks

Bookmarks


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
  • BB code is On
  • Smilies are On
  • [IMG] code is On
  • [VIDEO] code is On
  • HTML code is Off

Forum Rules

Понравилась статья? Поделить с друзьями:
  • Ошибка check fuel cap на форд фокус 1
  • Ошибка check esp на рено меган 3
  • Ошибка check engine шевроле круз
  • Ошибка check engine что это
  • Ошибка check engine рено меган 2