Ошибка 550 access denied for

Don’t forget to share this post!

Related Articles

Источник

Modified on: Wed, 1 Dec, 2021 at 10:34 AM

Problem

When you send an email, the email is not delivered, and you receive a non-delivery report with an error message similar to this:

550 5.4.1 Recipient address rejected: Access denied. AS(201806281) [CWLGBR01FT019.eop-gbr01.prod.protection.outlook.com]

Reason

The email was blocked by Directory-Based Edge Blocking (DBEB) in Microsoft 365.

DBEB is enabled by default for your domains in Microsoft 365. DBEB will block external emails sent to email addresses that do not exist within your Azure Active Directory.

Microsoft 365 does not currently synchronise mail-enabled public folder mailboxes with Azure AD. When emails have been processed by Signature Injection Service and are routed back to Microsoft 365, they are considered external by DBEB.

Note

This problem only applies to emails that are forwarded to the Signature Injection Service for signature injection based on your mobile device rules in Email Signature Manager.

Solution

See below depending on your environment:

  • If your public folders are hosted in Exchange Online
  • If your public folders are hosted in Exchange Server on-premise

If your public folders are hosted in Exchange Online

Directory-Based Edge Blocking (DBEB) does not currently support mail-enabled public folders in Exchange Online.

There are two workarounds:

  1. Stop routing emails sent to public folders via the Signature Injection Service (Recommended)
  2. Disable Directory-Based Edge Blocking (Not recommended)

Stop routing emails sent to public folders via the Signature Injection Service (Recommended)

Note this workaround means signatures will not be applied to email sent from mobile devices to public folders.

  1. Log on to Exchange admin center
  2. Navigate to Mail flow > Rules
  3. Select the rule Send to Symprex Signature Injection Service and click Edit
  4. In the Except if… section, click add exception
  5. Select The recipient… and is this person
  6. In the Select Members dialog, select all mail enabled public folders and click Add
  7. Click OK, then click Save

Disable Directory-Based Edge Blocking (Not recommended)

  1. Log on to Exchange admin center
  2. Navigate to Mail flow > Accepted domains
  3. Select the domain of the public folder
  4. Change the domain type to Internal relay
  5. Click Save

If your public folders are hosted in Exchange Server on-premise

Completing the steps below will ensure that mail-enabled public folders will no longer be considered invalid addresses by DBEB:

  1. Open Microsoft Azure Active Directory Connect
  2. On the Optional Features pane, tick the Exchange Mail Public Folders option
  3. Complete the wizard
Источник

I am trying to publish my project from my development machine to the staging environment. I would right click the project in visual studio and click publish. Most of the files would publish just fine, but a few were giving me problems. In the output log, there were multiple error messages, all stating:

Unable to add ‘XXX.ext’ to the Web site. Unable to add file ‘XXX.ext’. Access is denied (550)

I’m following this : But I don’t find the «Read-only» attribute checkbox…

So have you any ideas ? Thanks in advance.

asked Mar 28, 2012 at 7:32

Razor's user avatar

2

I just solved this problem on my own system. It was a permissions issue. What I had to do was grant «write» rights to myself on the IIS directory (in my case wwwroot). I retried the publish from Visual Studio and it worked perfectly.

answered Jan 18, 2013 at 21:32

Levi Botelho's user avatar

Levi BotelhoLevi Botelho

24.5k5 gold badges60 silver badges96 bronze badges

1

Open visual studio in administrator mode. It solved my problem.

answered Jul 20, 2015 at 12:45

arpan desai's user avatar

arpan desaiarpan desai

8892 gold badges13 silver badges23 bronze badges

0

If you only get this for select files:

  1. Go to the Server Published file folder
  2. Select the problem Files
  3. Properties
  4. Uncheck Read-Only

Apparently this can occur when Source Control non-checked out files are read only, and then someone just copies specific files.

(I tried other people’s suggestions: giving myself write access to wwwroot, running VS as admin, but for me it was the read-only that did the trick.)

answered Sep 22, 2014 at 14:36

Greg's user avatar

GregGreg

2,37521 silver badges26 bronze badges

2

If you have already published your solution and now it is not publishing, then run the Visual Studio on Administration mode and then publish it.

answered Dec 12, 2016 at 9:49

In my case, I already tried to uncheck the ‘Read-only’ in the problem folder and files but still doesn’t work. I already run the VS as administrator. What I did is just simply restart the visual studio and publish the project again, and it solves the problem.

answered May 4, 2018 at 8:27

Satria Janaka's user avatar

1

We had to add full path to publish location. So whereas the publish location used to be:

webtest1W_Apps

We did this:

webtest1D$webdataIntranetDeptsSOW_Apps

and then we didn’t have the error message

answered Dec 12, 2018 at 14:47

Michele's user avatar

MicheleMichele

3,57711 gold badges45 silver badges80 bronze badges

The solution for me was to recycle the Application Pool for the website in IIS. I had this problem (access denied) for a few of the folders in the publish directory and none of the above solutions worked for me. After I recycled the app pool, I was able to publish with no problems.

answered Aug 4, 2017 at 16:53

Carl Fredrickson's user avatar

it has permission problem of your web server
You must go to physical address of your website and share in with user of ftp account that you’ve create before and and your problem solve

answered Aug 9, 2017 at 21:01

Alireza's user avatar

AlirezaAlireza

2,7442 gold badges17 silver badges21 bronze badges

Are you LOCAL administrator to your own PC? If not, that could be the problem and it’s how I solved the issue at work.

answered May 8, 2019 at 2:12

Fandango68's user avatar

Fandango68Fandango68

4,3614 gold badges39 silver badges72 bronze badges

This is a permission issue. I solved this by giving Full control under ‘Security’ tab for Users for the deployment folder.

answered Nov 18, 2019 at 18:07

MegRoh's user avatar

I had same issue. I have followed the below steps to fix the issue:

First of all you have to identify that which account you are accessing visual studio. In my case, I have used my organization account.

  1. Go to your deployment which you set as «Target Location» in publish
    profile
  2. Right click the deployment folder
  3. Go to Security tab
  4. In the list of users, identify the account using which you are
    accessing Visual Studio ( in my case organization account)
  5. Grant full permission by checking the check box «Full control» and click
    «Apply»

answered Sep 25, 2020 at 7:27

Thamizh's user avatar

Источник

Microsoft Exchange Servers enforce strict restrictions on Email sending limits to keep accounts safe.

If your account exceeds this limit, you may get blocked by your Exchange server.

And, Office 365 users see an error like this “550, 5.1.8, Access Denied, Bad outbound sender”.

At Bobcares, we often resolve such email errors as a part of our Technical Support Engineers Services for web hosts.

Today, let’s discuss the top 2 reasons for this error and how we fix them.

“550, 5.1.8, Access Denied, Bad outbound sender” error – What this means?

When an Office 365 user sends too many emails, it bounces with the following error.

550 5.1.8 Access denied, bad outbound sender AS(41000001)
Your message couldn't be delivered because you weren't recognized as a valid sender. 
The most common reason for this is that your email address is suspected of sending spam and it's no longer allowed to send messages outside of your organization. Contact your email admin for assistance.

This error indicates that Office 365 has added this user to the blocked sender list suspecting spamming.

And, the Exchange server can’t identify the validity of the user as the user’s mail directory is disabled.

“550, 5.1.8, Access Denied, Bad outbound sender” error – Top 2 reasons

Office 365 block emails when the email sending limit of a domain is reached.

The top 2 reasons for a domain to reach this limit are:

  1. Sending bulk emails –  An Office 365 user sends bulk emails like newsletters, campaign emails, etc. which exceeds the specified message limits.
  2. Compromised email account – The user’s account has been compromised and used to send spam mails. Or, someone spoofed your email header and sent spam mails.

How to fix “550, 5.1.8, Access Denied, Bad outbound sender” error?

You need to unblock the user account from Exchange admin panel.

But, we can’t just unblock a malicious/problem account.

Our Support Engineers, does certain checks on the user account that include:

1. Check if the account is compromised or not

We perform a detailed email log analysis via Message Trace to get the type of emails sent from the user account.

Also, we analyze the Email activity of this user account from the Reports section to identify the volume of emails sent.

Using these details, we’ll confirm whether the email account is compromised or not.

2. Unblock the account

If the email account is safe, we’ll unblock the account using the below steps.

  • Go to Exchange Admin center > Protection > Action center.
  • Find out the blocked user.
  • Click Unblock Account in the description pane.
  • Click Yes to confirm the change.

If the email account is compromised, we’ll unblock the account and suggest the user to follow the below security steps.

  • Reset the password of the email account to a stronger one.
  • Scan his local machine using standard antivirus to confirm if it’s compromised or not.
  • Make sure Windows updates are enabled in his machine.
  • Remove any auto forwarders or auto-replies set for this account so that hacker can’t regain access to that account.
  • To prevent email header spoofing, enable DKIM record from the DNS management area.

Conclusion

“550, 5.1.8, Access Denied, Bad outbound sender” can occur when Office 365 blocks a user account. Today, we’ve seen the reasons for this error and how our Support Engineers fix this.

PREVENT YOUR SERVER FROM CRASHING!

Never again lose customers to poor server speed! Let us help you.

Our server experts will monitor & maintain your server 24/7 so that it remains lightning fast and secure.

SEE SERVER ADMIN PLANS

var google_conversion_label = «owonCMyG5nEQ0aD71QM»;

Источник

SMTP ошибка (550): Невозможно установить отправителя (Access denied — Invalid HELO name (See RFC2821 4.1.3))
Решение:
открываем файл /etc/roundcubemail/defaults.inc.php на редактирование. И находим строчку

Меняем ее на

Code: Select all

$config['smtp_helo_host'] = 'localhost';

или hostname отправителя почты.
Другой вариант — закомментировать строки в конфиг файле /etc/exim/exim.conf:

Code: Select all

 #  drop    condition     = ${if isip{$sender_helo_name}}
 #  message       = Access denied - Invalid HELO name (See RFC2821 4.1.3)

SMTP ошибка (451): Невозможно добавить получателя (Temporary local problem — please try later)
Решение: заливаем рабочую конфигурацию Exim для Centos 7 в exim.conf — https://stackoverflow.com/questions/651 … s-an-error

Code: Select all

######################################################################
#                                                                    #
#          Exim configuration file for Vesta Control Panel           #
#                                                                    #
######################################################################

#SPAMASSASSIN = yes
#SPAM_SCORE = 50
#CLAMD = yes

add_environment = <; PATH=/bin:/usr/bin
keep_environment =

disable_ipv6=true
domainlist local_domains = dsearch;/etc/exim/domains/
domainlist relay_to_domains = dsearch;/etc/exim/domains/
hostlist relay_from_hosts = 127.0.0.1
hostlist whitelist = net-iplsearch;/etc/exim/white-blocks.conf
hostlist spammers = net-iplsearch;/etc/exim/spam-blocks.conf
no_local_from_check
untrusted_set_sender = *
acl_smtp_connect = acl_check_spammers
acl_smtp_mail = acl_check_mail
acl_smtp_rcpt = acl_check_rcpt
acl_smtp_data = acl_check_data
acl_smtp_mime = acl_check_mime
.ifdef SPAMASSASSIN
spamd_address = 127.0.0.1 783
.endif

.ifdef CLAMD
av_scanner = clamd: /var/run/clamav/clamd.sock
.endif

tls_advertise_hosts = *
tls_certificate = ${if and 
{ 
{gt{$tls_in_sni}{}} 
{!match{$tls_in_sni}{/}} 
} 
{${if exists {/usr/local/vesta/ssl/exim.cert.$tls_in_sni} 
{/usr/local/vesta/ssl/exim.cert.$tls_in_sni} 
{/usr/local/vesta/ssl/certificate.crt} 
}} 
{/usr/local/vesta/ssl/certificate.crt} 
}

tls_privatekey = ${if and 
{ 
{gt{$tls_in_sni}{}} 
{!match{$tls_in_sni}{/}} 
} 
{${if exists {/usr/local/vesta/ssl/exim.key.$tls_in_sni} 
{/usr/local/vesta/ssl/exim.key.$tls_in_sni} 
{/usr/local/vesta/ssl/certificate.key} 
}} 
{/usr/local/vesta/ssl/certificate.key} 
}



openssl_options = +no_sslv2 +no_sslv3
tls_require_ciphers = ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:!DSS

daemon_smtp_ports = 25 : 465 : 587 : 2525
tls_on_connect_ports = 465
never_users = root
host_lookup = *
rfc1413_hosts = *
rfc1413_query_timeout = 1s
ignore_bounce_errors_after = 2d
timeout_frozen_after = 7d

DKIM_DOMAIN = ${lc:${domain:$h_from:}}
DKIM_FILE = /etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/dkim.pem
DKIM_PRIVATE_KEY = ${if exists{DKIM_FILE}{DKIM_FILE}{0}}



######################################################################
#                       ACL CONFIGURATION                            #
#         Specifies access control lists for incoming SMTP mail      #
######################################################################
begin acl

acl_check_spammers:
accept hosts = +whitelist

drop message = Your host in blacklist on this server.
log_message = Host in blacklist
hosts = +spammers

accept

acl_check_mail:
deny condition = ${if eq{$sender_helo_name}{}}
message = HELO required before MAIL

drop message = Helo name contains a ip address (HELO was $sender_helo_name) and not is valid
condition = ${if match{$sender_helo_name}{N((d{1,3}[.-]d{1,3}[.-]d{1,3}[.-]d{1,3})|([0-9a-f]{8})|([0-9A-F]{8}))N}{yes}{no}}
condition = ${if match {${lookup dnsdb{>: defer_never,ptr=$sender_host_address}}}{$sender_helo_name}{no}{yes}}
delay = 45s
drop condition = ${if isip{$sender_helo_name}}
message = Access denied - Invalid HELO name (See RFC2821 4.1.3)

drop condition = ${if eq{[$interface_address]}{$sender_helo_name}}
message = $interface_address is _my_ address

accept

acl_check_rcpt:
accept hosts = :

deny message = Restricted characters in address
domains = +local_domains
local_parts = ^[.] : ^.*[@%!/|]

deny message = Restricted characters in address
domains = !+local_domains
local_parts = ^[./|] : ^.*[@%!] : ^.*/\.\./

require verify = sender

accept hosts = +relay_from_hosts
control = submission

accept authenticated = *
control = submission/domain=

deny message = Rejected because $sender_host_address is in a black list at $dnslist_domainn$dnslist_text
hosts = !+whitelist
dnslists = ${readfile {/etc/exim/dnsbl.conf}{:}}

require message = relay not permitted
domains = +local_domains : +relay_to_domains



deny message = smtp auth requried
sender_domains = +local_domains
!authenticated = *

require verify = recipient

.ifdef CLAMD
warn set acl_m0 = no

warn condition = ${if exists {/etc/exim/domains/$domain/antivirus}{yes}{no}}
set acl_m0 = yes
.endif

.ifdef SPAMASSASSIN
warn set acl_m1 = no

warn condition = ${if exists {/etc/exim/domains/$domain/antispam}{yes}{no}}
set acl_m1 = yes
.endif

accept

acl_check_data:
.ifdef CLAMD
deny message = Message contains a virus ($malware_name) and has been rejected
malware = *
condition = ${if eq{$acl_m0}{yes}{yes}{no}}
.endif

.ifdef SPAMASSASSIN
warn !authenticated = *
hosts = !+relay_from_hosts
condition = ${if < {$message_size}{100K}}
condition = ${if eq{$acl_m1}{yes}{yes}{no}}
spam = spamd:true/defer_ok
add_header = X-Spam-Score: $spam_score_int
add_header = X-Spam-Bar: $spam_bar
add_header = X-Spam-Report: $spam_report
set acl_m2 = $spam_score_int
warn condition = ${if !eq{$acl_m2}{} {yes}{no}}
condition = ${if >{$acl_m2}{SPAM_SCORE} {yes}{no}}
add_header = X-Spam-Status: Yes
message = SpamAssassin detected spam (from $sender_address to $recipients).
.endif

accept

acl_check_mime:
deny message = Blacklisted file extension detected
condition = ${if match {${lc:$mime_filename}}{N(.ade|.adp|.bat|.chm|.cmd|.com|.cpl|.exe|.hta|.ins|.isp|.jse|.lib|.lnk|.mde|.msc|.msp|.mst|.pif|.scr|.sct|.shb|.sys|.vb|.vbe|.vbs|.vxd|.wsc|.wsf|.wsh)$N}{1}{0}}

accept



######################################################################
#                   AUTHENTICATION CONFIGURATION                     #
######################################################################
begin authenticators

dovecot_plain:
driver = dovecot
public_name = PLAIN
server_socket = /var/run/dovecot/auth-client
server_set_id = $auth1

dovecot_login:
driver = dovecot
public_name = LOGIN
server_socket = /var/run/dovecot/auth-client
server_set_id = $auth1



######################################################################
#                      ROUTERS CONFIGURATION                         #
#               Specifies how addresses are handled                  #
######################################################################
begin routers

#smarthost:
# driver = manualroute
# domains = ! +local_domains
# transport = remote_smtp
# route_list = * smartrelay.vestacp.com
# no_more
# no_verify

dnslookup:
driver = dnslookup
domains = !+local_domains
transport = remote_smtp
no_more

userforward:
driver = redirect
check_local_user
file = $home/.forward
allow_filter
no_verify
no_expn
check_ancestor
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply

procmail:
driver = accept
check_local_user
require_files = ${local_part}:+${home}/.procmailrc:/usr/bin/procmail
transport = procmail
no_verify

autoreplay:
driver = accept
require_files = /etc/exim/domains/$domain/autoreply.${local_part}.msg
condition = ${if exists{/etc/exim/domains/$domain/autoreply.${local_part}.msg}{yes}{no}}
retry_use_local_part
transport = userautoreply
unseen

aliases:
driver = redirect
headers_add = X-redirected: yes
data = ${extract{1}{:}{${lookup{$local_part@$domain}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/aliases}}}}
require_files = /etc/exim/domains/$domain/aliases
redirect_router = dnslookup
pipe_transport = address_pipe
unseen

localuser_fwd_only:
driver = accept
transport = devnull
condition = ${if exists{/etc/exim/domains/$domain/fwd_only}{${lookup{$local_part}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/fwd_only}{true}{false}}}}

localuser_spam:
driver = accept
transport = local_spam_delivery
condition = ${if eq {${if match{$h_X-Spam-Status:}{N^YesN}{yes}{no}}} {${lookup{$local_part}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/passwd}{yes}{no_such_user}}}}

localuser:
driver = accept
transport = local_delivery
condition = ${lookup{$local_part}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/passwd}{true}{false}}

catchall:
driver = redirect
headers_add = X-redirected: yes
require_files = /etc/exim/domains/$domain/aliases
data = ${extract{1}{:}{${lookup{*@$domain}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/aliases}}}}
file_transport = local_delivery
redirect_router = dnslookup

terminate_alias:
driver = accept
transport = devnull
condition = ${lookup{$local_part@$domain}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/aliases}{true}{false}}



######################################################################
#                      TRANSPORTS CONFIGURATION                      #
######################################################################
begin transports

remote_smtp:
driver = smtp
#helo_data = $sender_address_domain
dkim_domain = DKIM_DOMAIN
dkim_selector = mail
dkim_private_key = DKIM_PRIVATE_KEY
dkim_canon = relaxed
dkim_strict = 0

procmail:
driver = pipe
command = "/usr/bin/procmail -d $local_part"
return_path_add
delivery_date_add
envelope_to_add
user = $local_part
initgroups
return_output

local_delivery:
driver = appendfile
maildir_format
maildir_use_size_file
user = ${extract{2}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/passwd}}}}
group = mail
create_directory
directory_mode = 770
mode = 660
use_lockfile = no
delivery_date_add
envelope_to_add
return_path_add
directory = "${extract{5}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/passwd}}}}/mail/${lookup{$domain}dsearch{/etc/exim/domains/}}/${lookup{$local_part}dsearch{${extract{5}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/passwd}}}}/mail/${lookup{$domain}dsearch{/etc/exim/domains/}}}}"
quota = ${extract{6}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/passwd}}}}M
quota_warn_threshold = 75%

local_spam_delivery:
driver = appendfile
maildir_format
maildir_use_size_file
user = ${extract{2}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/passwd}}}}
group = mail
create_directory
directory_mode = 770
mode = 660
use_lockfile = no
delivery_date_add
envelope_to_add
return_path_add
directory = "${extract{5}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/passwd}}}}/mail/${lookup{$domain}dsearch{/etc/exim/domains/}}/${lookup{$local_part}dsearch{${extract{5}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/passwd}}}}/mail/${lookup{$domain}dsearch{/etc/exim/domains/}}}}/.Spam"
quota = ${extract{6}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/passwd}}}}M
quota_directory = "${extract{5}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/passwd}}}}/mail/${lookup{$domain}dsearch{/etc/exim/domains/}}/${lookup{$local_part}dsearch{${extract{5}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/${lookup{$domain}dsearch{/etc/exim/domains/}}/passwd}}}}/mail/${lookup{$domain}dsearch{/etc/exim/domains/}}}}"
quota_warn_threshold = 75%

address_pipe:
driver = pipe
return_output


address_file:
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add

address_reply:
driver = autoreply

userautoreply:
driver = autoreply
file = /etc/exim/domains/$domain/autoreply.${local_part}.msg
from = "${local_part}@${domain}"
headers = Content-Type: text/plain; charset=utf-8;nContent-Transfer-Encoding: 8bit
subject = "${if def:h_Subject: {Autoreply: "${rfc2047:$h_Subject:}"} {Autoreply Message}}"
to = "${sender_address}"

devnull:
driver = appendfile
file = /dev/null

######################################################################
#                      RETRY CONFIGURATION                           #
######################################################################
begin retry

# Address or Domain Error Retries
# ----------------- ----- -------
* * F,2h,15m; G,16h,1h,1.5; F,4d,6h



######################################################################
#                      REWRITE CONFIGURATION                         #
######################################################################
begin rewrite



######################################################################
Источник

Возможно, вам также будет интересно:

  • Ошибка 55 митсубиси спейс раннер
  • Ошибка 55 команда не поддерживается в данной реализации фр
  • Ошибка 55 hbb mitsubishi pajero
  • Ошибка 5463 bmw x3 e83
  • Ошибка 545 146 фредлайнер коламбия

    • Понравилась статья? Поделить с друзьями:
    0 0 голоса
    Рейтинг статьи
    Подписаться
    Уведомить о
    guest

    0 комментариев
    Старые
    Новые Популярные
    Межтекстовые Отзывы
    Посмотреть все комментарии