Ошибка 3270 access как исправить

	Номер ошибки:	Ошибка 3270
Название ошибки:	Microsoft Access Error 3270
Описание ошибки:	Property not found.
Разработчик:	Microsoft Corporation
Программное обеспечение:	Microsoft Access
Относится к:	Windows XP, Vista, 7, 8, 10, 11

Проверка «Microsoft Access Error 3270»

Как правило, специалисты по ПК называют «Microsoft Access Error 3270» как тип «ошибки времени выполнения». Разработчики, такие как Microsoft Corporation, обычно проходят через несколько контрольных точек перед запуском программного обеспечения, такого как Microsoft Access. К сожалению, иногда ошибки, такие как ошибка 3270, могут быть пропущены во время этого процесса.

«Property not found.» может возникнуть у пользователей Microsoft Access даже при нормальном использовании приложения. Когда это происходит, конечные пользователи программного обеспечения могут сообщить Microsoft Corporation о существовании ошибки 3270 ошибок. Команда программирования может использовать эту информацию для поиска и устранения проблемы (разработка обновления). Поэтому, когда вы сталкиваетесь с запросом на обновление Microsoft Access, это обычно связано с тем, что это решение для исправления ошибки 3270 и других ошибок.

Что на самом деле вызывает ошибку времени выполнения 3270?

Сбой во время выполнения Microsoft Access, как правило, когда вы столкнетесь с «Microsoft Access Error 3270» в качестве ошибки во время выполнения. Следующие три наиболее значимые причины ошибок выполнения ошибки 3270 включают в себя:

Ошибка 3270 Crash — это типичная ошибка 3270 во время выполнения, которая полностью аварийно завершает работу компьютера. Если Microsoft Access не может обработать данный ввод, или он не может получить требуемый вывод, это обычно происходит.

Утечка памяти «Microsoft Access Error 3270» — при утечке памяти Microsoft Access это может привести к медленной работе устройства из-за нехватки системных ресурсов. Это может быть вызвано неправильной конфигурацией программного обеспечения Microsoft Corporation или когда одна команда запускает цикл, который не может быть завершен.

Ошибка 3270 Logic Error — Логические ошибки проявляются, когда пользователь вводит правильные данные, но устройство дает неверный результат. Обычные причины этой проблемы связаны с ошибками в обработке данных.

Основные причины Microsoft Corporation ошибок, связанных с файлом Microsoft Access Error 3270, включают отсутствие или повреждение файла, или, в некоторых случаях, заражение связанного Microsoft Access вредоносным ПО в прошлом или настоящем. Как правило, решить проблему можно заменой файла Microsoft Corporation. Мы также рекомендуем выполнить сканирование реестра, чтобы очистить все недействительные ссылки на Microsoft Access Error 3270, которые могут являться причиной ошибки.

Распространенные сообщения об ошибках в Microsoft Access Error 3270

Эти проблемы Microsoft Access, связанные с Microsoft Access Error 3270, включают в себя:

• «Ошибка программного обеспечения Microsoft Access Error 3270. «
• «Недопустимый файл Microsoft Access Error 3270. «
• «Возникла ошибка в приложении Microsoft Access Error 3270. Приложение будет закрыто. Приносим извинения за неудобства.»
• «К сожалению, мы не можем найти Microsoft Access Error 3270. «
• «Microsoft Access Error 3270 не найден.»
• «Ошибка запуска программы: Microsoft Access Error 3270.»
• «Файл Microsoft Access Error 3270 не запущен.»
• «Microsoft Access Error 3270 остановлен. «
• «Ошибка пути программного обеспечения: Microsoft Access Error 3270. «

Проблемы Microsoft Access Error 3270 с участием Microsoft Accesss возникают во время установки, при запуске или завершении работы программного обеспечения, связанного с Microsoft Access Error 3270, или во время процесса установки Windows. Выделение при возникновении ошибок Microsoft Access Error 3270 имеет первостепенное значение для поиска причины проблем Microsoft Access и сообщения о них вMicrosoft Corporation за помощью.

Причины проблем Microsoft Access Error 3270

Проблемы Microsoft Access Error 3270 могут быть отнесены к поврежденным или отсутствующим файлам, содержащим ошибки записям реестра, связанным с Microsoft Access Error 3270, или к вирусам / вредоносному ПО.

В основном, осложнения Microsoft Access Error 3270 связаны с:

• Недопустимая или поврежденная запись Microsoft Access Error 3270.
• Вредоносные программы заразили Microsoft Access Error 3270, создавая повреждение.
• Microsoft Access Error 3270 ошибочно удален или злонамеренно программным обеспечением, не связанным с приложением Microsoft Access.
• Другое программное обеспечение, конфликтующее с Microsoft Access, Microsoft Access Error 3270 или общими ссылками.
• Microsoft Access/Microsoft Access Error 3270 поврежден от неполной загрузки или установки.

Продукт Solvusoft

Загрузка
WinThruster 2023 — Проверьте свой компьютер на наличие ошибок.

Совместима с Windows 2000, XP, Vista, 7, 8, 10 и 11

Установить необязательные продукты — WinThruster (Solvusoft) | Лицензия | Политика защиты личных сведений | Условия | Удаление

Read time 8 minutes

In MS Access 2016 and other versions, while executing the code written to pull data from custom fields, sometimes a runtime error appears on-screen, with an error message as follows, “property not found or Access Database error 3270.”

Because of ‘Property Not Found’ error which is also known as ‘Access Database error 3270,’ the person who’s written the code face difficulties in fixing the issue, as narrated below:

In this article, we’ll guide you through different methods to fix Access database error 3270 – the ‘property not found,’ issue. As this is a runtime error, before moving on the fix, part let’s discuss a little about Runtime Error.

Runtime Error

Provisionally, Runtime Error is a program error that appears while the program is being executed. These errors are also commonly called and referred to as “bugs,” and are often found during the debugging process, before the public software release. After the public distribution of a program or application, if a runtime error is found, the developer or the company release patches or small-sized updates aimed to fix the occurring issue.

How to Fix the Access Database Error 3270 – Property Not Found?

In Microsoft Access 2016 to define a database, the code is written in VBA – Visual Basic for Applications, which can reference a collection of objects including Data Access Objects – DAO, ActiveX Data Objects, and more.

When the custom code is written, the chances of bug appearance are quite positive. So, to fix the Access database error 3270, it is recommended to check the code and correct mistakes wherever found. And now that you’re aware of the relation between runtime error and Access database error 3270, how would you get rid of this problem without trying anything else?

For cases where the developer finds it difficult to track, there are online communities to get help from such as Microsoft Community.

It won’t be right to associate the Access database error 3270 ‘property not found’ issue with coding or programming mistakes every-time. One can encounter the same error due to other reasons such as, conflict due to other application or programs installed on the system, outdated application and libraries, virus attacks, outdated operating system software, and other possible conflicts. And these things sometimes lead to Access database file corruption followed by error messages while trying to open the corrupt or damaged file in MS Access 2016; as a result, the user searches for help topics like how to open MDB file free?

You can try to fix Access database error 3270 ‘property not found,’ issue by implementing the below-given methods sequentially until the issue is sorted, if correcting the access database code didn’t help at all.

Clear Temp Folder

Due to continuous web surfing and computer use, the system collects junk files over time, and sometimes it causes both the system and the applications such as Microsoft Access 2016 (or other versions) to respond slowly and throw error messages as above.

You can clean up these junk file from the temporary files folder, and for doing so, follow the steps below:

1. Press CTRL +to open RUN utility.
2. Type %temp% to open the temp folder and press Enter.
3. Press CTRL + A to select all junk/temporary files.
4. Right-click and select Delete.
   

Check Windows 10 Updates

Like it’s mentioned above, that a runtime error can is commonly called and referred to as a bug. Microsoft periodically releases security patches and system updates to address issues that could be associated with Access database error 3270 ‘property not found’.

Updating Windows 10 or any other version of Windows operating system is quite simple, go through the following steps:

1. Press+ Q and type Settings.
2. Move to Update & Security section, as below.
3. Click on Windows Update.
4. Check for available updates by clicking on Check for Updates button.
5. Initiate the download and install the updates
   

Run System Virus Scan

It is nothing new that all systems running Microsoft Windows OS are vulnerable to virus attacks. Therefore it is good to have Antivirus software installed in advance.

Malicious intruders can harm the system and corrupt or delete the runtime error related log files, which would turn issue tracking even harder.

Luckily, Windows 10 comes with Windows Defender program shipped built-in with no extra costs to pay. You can run a quick system scan to find out viruses and track malicious content by implementing the given steps:

1. Press + Q and type Settings.
2. Move to the Security section and click on Windows Defender Security Center.
3. Click on the Shield icon, as below.
4. Start the quick system scan by clicking on the Quick Scan button.
   

Note: Run Advanced scan, as shown above, in case if the Quick Scan fails and the issue persists.

Reinstall Microsoft Access 2016

In case, if you’ve tried all the methods suggested above and none of them comes handy, then it is possible that the issue is associated with the application itself which is Microsoft Access 2016 (or any other version you’re using).
Try uninstalling MS Access 2016 and then, re-install the application.

1. Press+ Q and type Control Panel.
2. Click on Programs and Features.
3. Locate Microsoft Access 2016 and other associated programs or application.
4. Right-click and select Uninstall.
5. Done.

For installing Microsoft Access 2016 or later version again on your system, it is important that you have the Office 2016 or later installer package available. Double-click on the executable setup file to begin the installation process; before moving any further, you can customize the installation package and choose to install Microsoft Access 2016 alone, by clicking on the Customize button, as shown below.

Code mistakes & errors which causes MS Access 2016 to throw error messages such as, “Property Not Found” could be sorted, but in case if doing so doesn’t help you at the first place, implement the methods given above to hunt, track, and fix access database error 3270, issue.

Kernel for Access Database Repair

The above given methods can help you overcome the ‘property not found’ problem in MS Access 2016 and other versions, but what about those situations when Access Database file corrupts and turns damaged due to many reasons like incomplete file transfer, hard drive corruption, virus attacks, improper Access application shutdowns, sudden system power outages, and more?

Microsoft tools lack a strong and effective native approach to tackle and fight the issues of file corruption & damage. In critical scenes of MS Access Database file – MDB, ACCDB— corruption, Access Database Repair software is your one-stop solution to fix all issues associated with MS Access 2016 and other versions.

Kernel for Access Database Repair provides wide support for different versions of MS Access ranging from Access 95 to 2016, making Access Database file repair & recovery easier for all users irrespective of the version of Windows operating system they’re using.

Wrap

Multiple reasons can stand behind MS Access 2016 ‘property not found’ issue. So, it is best to look for code errors and mistakes in cases the error is shown on-screen right when you’ll start the code execution; and in rest, the code will execute, but the error message will pop when the Ok button is clicked inside the prompt. And if you’re searching for methods about how to repair corrupt Microsoft access database, how to open MDB file free and more then, download and evaluate the trial version of Kernel for Access Database repair. It is a one-stop solution for all issues of MS Access.

Synopsis: Let us discuss- How to Resolve Access Database Error 3270 or the issue of runtime error 3270 property not found an error.

The users of MS Access 2016 and other versions, while executing the code written to pull data from custom fields, sometimes a runtime error is shown on the screen, with an error message:

“property
not found or Access Database error 3270.”

Now, let us discuss some of the symptoms that can occur due to Access Database Error 3270.

Symptoms
shown
by the system in case of
Access
Database
Error 3270

Before
knowing about the ways to Resolve
Access
Database Error 3270, we should analyse the symptoms.

• Crash
  in the active program window.

• Your
  PC frequently crashes with Error 3270 when running the same
  programs.

• “Microsoft
  Access Error 3270” message
  is displayed.

• Slower
  Windows slow response to mouse or keyboard input.

• System
  abruptly frezes for few seconds.

These
3270 error messages can appear duringAccess or Windows program
installation, while the program is running and during Windows startup
or shutdown.So, Keeping track of when and where your 3270 error
occurs is a critical piece of information in troubleshooting this
problem.

Now
let us move further and discuss the common reasons behind access
database Error 3270.

Reasons
behind Access Database Error 3270

Few
reasons are:

• Corrupt
  or damaged version download of MS Access

• Incomplete
  or improper installation of Microsoft Access software.

• Corruption
  in Windows registry from a recent Microsoft Access-related software
  change (install or uninstall).

• Virus
  or malware infection that can lead to Windows file corruption

• If
  another program maliciously or mistakenly deleted Microsoft
  Access-related files.

• Use
  of outdated application or Windows operating system Version.

Runtime Errors such as “Error 3270” can be caused by a variety of factors, so it is important that you troubleshoot each of the possible causes to prevent it from recurring.

Methods
to resolve Access Database Error 3270:

Some
of the methods that you can try to fix Access Database Error 3270
are:

Method
1. Try
Clearing
the Temp
Folder

Continuous
web surfing and system use can slow down the system. So, you need to
remove the junk files and temporary files by following the steps
metioned below:

1. Open
   RUN utility by clicking on CTRL + Windows.

2. Then
   open the Temp file folder by typing %temp% and press Enter.

3. Click
   on Select All or Press CTRL + A to select all junk/temporary files.

4. Now
   Right-click and select Delete Option.

   This
   way all the temp files will be deleted. Now see if the error is
   removed or not.

Method
2.Check Windows 10 Updates and download the latest updates

Microsoft
periodically releases security patches and system updates to address
issues that could be associated with Access database error 3270
‘property not found’ also known as Bug.

Updating
Windows 10 or any other version of Windows operating system is quite
simple, you can follow the steps given below:

1. Start
   by Pressing Windows+ Q and type Settings.

2. Move
   to Update & Security section, as below.

3. Click
   on Windows Update.

4. Check
   for available updates by clicking on Check for Updates button.

5. Download
   and install the updates

Method
3.Perform Virus and Malware scan

Your
system is vulnerable to virus or malware attack. So, if this Access
run time error is caused by virus attack, you can run a quick system
scan.

Windows
10 comes with Windows Defender program shipped built-in with no extra
costs to pay. Just follow the steps given below:

1. Start
   by Pressing Windows+ Q and type Settings.

2. Now
   go to the Security section and click on Windows Defender Security
   Center.

3. Next,
   Click on the Shield icon

4. This
   will start the quick system scan by clicking on the Quick Scan
   button.

Method
4.Reinstall Microsoft Access 2016

If
none of the above methods are working for you, then The issue might
be related to MS Access 2016/2018 itself
In this case you should
uninstall the MS Access and then, re-install the application.Follow
the steps given below:

1. Press
   on Windows + Q and type Control Panel.

2. Now
   go to the Programs and Features.

3. Find
   Microsoft Access 2016 and other associated programs or application.

4. Press
   Right-click and select Uninstall.

5. Done.

6. Now
   make sure you have MS Office 2016 or later installer package in the
   system

7. Now
   double click on the executable setup file to start the installation
   process.

8. Install
   the MS Access 2016 version.

Code
mistakes & errors which causes MS Access 2016 to throw error
messages such as, “Property Not Found” could be sorted, but in
case if doing so doesn’t help you at the first place, implement the
methods given above to fix or resolve access database error 3270,
issue.

I have discussed the manual methods to fix or solve Access Database Error 3270 on your own. But if these methods are not good enough in your case, then you can use the Access Database Recovery Tool.

To
Sum Up

As we have discussed in the article, there are multiple causes and symptoms shown by Microsoft Access Database Error 3270. I have elaborated the manual ways by which you can try to Resolve Access Database Error 3270 on your own. But, in case you are not able to solve the error, the you can simply download and use the Professional Tool i.e. The Access Database Recovery Tool. Hope this article helps you to solve this runtime error.

Related Post