Nw 31280 4 ps4 ошибка

The NW-31280-4 error on the PS4 is a more obscure error code, which suddenly pops up telling players their PS4 cannot connect to the internet. They cannot play games online, see their friends list or log into Youtube or other apps. The PS4 just cuts off from the internet entirely.

This appears to be more of a general error than a specific one, and can have many different causes and solutions to fix it. There could be a number of reasons why your PS4 cannot connect to the internet, including a weak WiFi signal from your router, or the PSN or wider internet in your area having problems.

The NW-31280-4 connection error usually relates to a weak Wi-Fi connection with your router, and either moving to wired LAN, resetting your console or reconfiguring and refreshing your internet settings seems to resolve this issue. There may also be an IP conflict where your PS4 is trying to use and IP address that another device on your network is already using, and moving to a different IP often resolves this.

Let’s run through some of the different ways PS4 users have fixed this error message in more detail.

Quick Solutions To Fix PS4 Error Code NW-31280-4

Browsing through the various forums, here is a list of quick solutions that have worked for different PS4 users in resolving this error code. Most often, it appears to simply boil down to a poor Wi-Fi connection between your router and console, or IP address conflict, and either reconfiguring or resetting it in different forms often restores the connection and gets rid of the error message.

• Move your PS4 and router closer together.
• Quick reset your PS4 and router.
• Hard reset your PS4 and router, fully unplugging them for 10-15 minutes before plugging them back in. Especially try this if your PS4 has been in Rest Mode for a long time.
• Make sure your PS4 is fully up to date. Go the Settings….System Software Update to check.
• Restore the Default Settings on your PS4 in Safe Mode – see this video. Option number 4 is the one to use. It merely restores all default connection and game settings; it does not delete any data. Here are the quck steps:
  • • Make sure your PS4 controller is plugged in and not on wireless.
    • Press and hold the power button for 7 seconds on your PS4 when it is turned off.
    • Safe Mode should boot up
    • When in there, you need to select Option 4 – Restore Default Settings.
• Use wired LAN connections instead of wireless. Ethernet connections are always better than wireless for gaming. See the section below for more on this.
• Use the WPS button to connect through Wi-Fi. This is a button that is on your router; press and hold it until it starts flashing and then run through the Wi-Fi connection setup on your PS4, selecting the WPS option whilst the button is still flashing on your router.
• Configure your connection through Wi-Fi, but select Custom instead of Easy when setting it up. Then run through all the options as they are, without changing them and finish the setup and test the connection. Sometimes works.
• Connect with a LAN cable temporarily and set up a connection this way. Then reconfigure through Wi-Fi again if you would rather use wireless for now, leaving the LAN cable plugged in. Once your Wi-Fi in connected, unplug the LAN cable and the Wi-Fi should work.
• Switch the Wi-Fi band your console is connecting from 2.4GHz to 5GHz or vice versa. See Solution #1 of this article for how to do this. Use the other band to whatever you are using now.
• There may be an IP addressing conflict. Try setting a static IP for your PS4, as per Solution #3 in this article. For the last part of your IP, pick a number above 100 but less than 254. If you are using a static IP, switch back to Automatic or Easy setup and see if this works. Here are quick steps for setting a static IP:
  • • Go to Settings…Network….Set Up Internet Connection
    • Select Wi-Fi or LAN depending on your connection
    • Select Custom setup for LAN
    • For IP Address, switch to Manual and input the following values:
      • • IP Address – 192.168.0.x, where x is any number between 100 and 254 (you choose)
        • Subnet Mask – 255.255.255.0
        • Default Gateway – 192.168.0.1
        • Primary DNS – 8.8.8.8
        • Secondary DNS – 8.8.4.4
    • Alternatively, you can go to Settings.…Connection Status before you start, and note down all the above settings with a pen and paper, and then go and reconfigure the connection, entering the details as you noted them, but just changing the last digit of the IP address. Sometimes IP addresses, Subnet Masks and Default Gateways do change depending on where you are in the world.
    • Run through the rest of the settings as they are, without changing them.
    • Save and test your internet connection to see if you can get back online.
    • See our full article on setting a static IP address for a more in depth look at this.

Leaving the PS4 in Rest Mode for a long time, several hours or more, is also a fairly common cause of this error message, and fully resetting your console a few times can sometimes flush all the settings out and reset everything back to the point where you can connect again.

In fact all of the above solutions are basically different ways of resetting all your network settings and configuration back to default and starting again with a new connection, new IP address etc.

Anyone who has tried all these solutions and still can’t get this error message resolved, or are now getting a different error message, leave a note in the comments, or check out our other PS4 error codes we have covered.

Use Wired Connections For Gaming If Possible

As we have mentioned in relation to PS4 error messages before, so many of them often result from using WiFi to connect and getting a poor or unreliable signal as a result. This is unfortunately largely built into the way WiFi operates, as wireless RF signals are always prone to dropping out and weakening over distance.

This is why it is always better to be on wired LAN/ethernet connections for gaming whenever possible, since they always produce a more reliable and consistent connection for gaming than WiFi, especially the further you get from the router. See our article on the many benefits wired connections have over WiFi for gaming.

If you are only using WiFi in the first place because you are too far away from the router to run an ethernet cable directly, then consider a powerline adapter as an alternative way of getting on a wired connection even at distance from the router.

Powerline adapter kits consist of a pair of adapters, one of which is connected to your router and other of which is connected to your PS4. The two adapters then communicate through the existing electrical wiring of the house to deliver a strong, wired internet connection to the receiving end, even if it is several rooms away from the router and the WiFi signal is weak there.

They are clever home networking solutions which can help out with exactly this problem of WiFi being too weak for PS4 users when you have too many walls or floors in the way and the Wi-Fi signal keeps failing and dropping out, delivering these connection error message like the NW-31280-4 error.

Powerline adapters take advantage of the fact that copper wiring can transmit data as well as electricity, and effectively turn your wall socket into a wired ethernet connection, bypassing Wi-Fi altogether and giving you the advantages of a wired connection (low latency, higher bandwidth, consistent signal) without having to run long cables through the house.

They can be an excellent solution for gamers and are worth considering for gamers if you are on Wi-Fi and you keep suffering from lag or getting these PS4 connection error messages. See the video just below for a demonstration of how powerline technology works.

Click here to view the TP Link Nano Powerline Adapter on Amazon, plus see more advanced models on our Powerline Adapters page.

Ошибка с интернетом nw-31280-4.Нет подключенияю.Звонил провайдеру сказали что ошибка в самой приставки надо полазить в настройках сети и поставить все на автоматическое.Вроде поставил а ошибка осталась.Подскажите как настроить 

На консоли необходимо ввести вручную DNS сервера Google, и узнать IP и MAC адрес.

Настройки -> Сеть -> Установить соединение с Интернетом -> Использовать кабель LAN/WiFi -> Специальный -> Автоматически -> Не указывать -> Вручную ->

Основной DNS: 8.8.8.8

Дополнительный DNS: 8.8.4.4

-> Автоматически -> Не использовать -> Проверить соединение с интернетом -> Назад ->

Узнать состояние соединения 

https://dl.dropboxus…0432/PS/nwt/P..

На скриншоте можно увидеть введённые DNS сервера и необходимые нам в будущем IP (в данном случае «192.168.0.102») и MAC адрес (в зависимости от способа соединения — кабель или WiFi).

— НАСТРОЙКА РОУТЕРА (На примере TL-WDR3600): —

1. Входим в web-интерфейс роутера, через браузер. 

a. https://dl.dropboxus…0432/PS/nwt/w..

b. https://dl.dropboxus…0432/PS/nwt/r..

2. Переходим в раздел резервирования IP адресов. Вводим IP и MAC адрес консоли, полученные выше из сведений о состоянии соединения консоли. 

DHCP -> Address Reservation -> Add New

a. https://dl.dropboxus…0432/PS/nwt/r..

b. https://dl.dropboxus…0432/PS/nwt/r..

3. Переходим в раздел перенаправления портов. Вводим IP консоли и необходимые порты для PSN и RemotePlay.

Forwarding -> Virtual Servers -> Add New

a. https://dl.dropboxus…0432/PS/nwt/r..

b. https://dl.dropboxus…0432/PS/nwt/r..

3.5 Альтернативой отрытия каждого порта по отдельности, является опция DMZ. Она открывает все порты разом.

Forwarding -> DMZ

https://dl.dropboxus…0432/PS/nwt/d..

4. Перезагружаем роутер и PS4.

The NW-31280-4 error on the PS4 is a darker error code, which appears suddenly warning players that their PS4 cannot connect to the Internet. They cannot play online games, view their friends list or access YouTube or other applications. The PS4 simply separates the internet in its entirety.

This seems to be more of a general error than a specific one, and it can have many different causes and solutions to solve it. There could be a number of reasons why your PS4 cannot connect to the Internet, including a weak Wi-Fi signal from the router, or the PSN or wider Internet in your area that has problems.

More commonly, however, this connection error refers to a weak Wi-Fi connection with your router, and either moves to the wired LAN, resetting the console or reconfiguring and updating your Internet settings seems to solve this problem. . There may also be an IP conflict where your PS4 is trying to use and the IP address that another device on the network is already using, and moves to a different IP often resolves this.

We will run through some of the different ways PS4 users have fixed this error message in more detail.

Quick solutions to correct a PS4 error Code NW-31280-4

Browsing through the various forums, here is a list of quick fixes that have worked for different PS4 users in resolving this error code.

Very often, it seems that they simply boil down to a poor Wi-Fi connection between the router and the console, or IP address conflict, and, either reconfiguring or resetting in different ways often restores the connection and gets rid of The error message

• Move your PS4 and router closer.
• Quickly reset your PS4 and router.
• Resetting your PS4 hardware and router, disconnect them completely for 10-15 minutes before reconnecting them. Especially try this if your PS4 has been at rest for a long time.
• Make sure your PS4 is fully up to date. Go to the settings … Software update system to check.
• Restore the default settings on your PS4 in Safe mode — watch the video . Option number 4 is to use. Simply reset all default connection and game settings; No data is deleted.
• Use wired LAN connections instead of wireless technology. Ethernet connections are always better than wireless for games . See the next section for more information on this.
• Use the WPS button to connect via Wi-Fi. This is a button that appears on the router; Press and hold the key until it starts to flash and then run through the Wi-Fi connection settings on your PS4, selecting the WPS option while the button is still flashing on your router.
• Set up the connection via WiFi, but select Personalize instead of easy when commissioning. Then, run through all the options, without changing them and finish the installation and test the connection. Sometimes it works.
• Connect with a LAN cable temporarily and configure a connection in this way. Then reconfigure via Wi-Fi again if you prefer to use a wireless network, for now, leaving the LAN cable plugged in. Once your WiFi is connected, unplug the LAN cable and the WiFi should work.
• Changing the Wi-Fi band of the console is connected from 2.4 GHz to 5 GHz or vice versa. See Solution # 1 of this article to know how to do this. Use the other band to what you are using now.
• There may be an IP conflict addressed. Try setting a static IP address for your PS4, according to Solution # 3 in this article . For the last part of your IP, choose a number greater than 100 but less than 254. If you are using a static IP address, switch back to automatic or Easy configuration and see if this works.

Leaving the PS4 in sleep mode for a long time, several hours or more, it is also a very common cause of this error message and fully resetting your console a few times can sometimes eliminate all round-trip settings everything resets it at the point where it can connect again.

In fact all the above solutions are basically different ways to reset all network settings and return to the default settings and start over with a new connection, new IP address, etc .

Anyone who has tried all these solutions and still cannot get this error message resolved, or they are receiving a different error message, leave a note in the comments, or check out our other PS4 error codes that we have covered.

The use of wired connections for the game if possible

As we mentioned in relation to PS4 error messages before, many of them often as a result of using Wi-Fi to connect and get a weak or unreliable signal as a result. Unfortunately, this is largely integrated in the way WiFi works, since wireless RF signals are always prone to attrition and weakening over distance.

This is why it is always better to be on wired LAN / Ethernet connections for the game whenever possible, since they always produce a more reliable and consistent connection for the WiFi game, especially as we get from the router. See our article on the many benefits of wired connections via WiFi for games.

If you are only using Wi-Fi, first because it is too far from the router to run an Ethernet cable directly, and then consider a Powerline / PLC adapter as an alternative way to get on a wired connection, even at a distance from the router

Powerline adapter kits consist of a pair of adapters, one of which is connected to your router and others of which is connected to your PS4. The two adapters then communicate through the existing electrical wiring of the house to deliver a strong Internet connection, by cable to the receiving end, even if it is several rooms away from the router and the Wi-Fi signal is weak there .

They are smart home network solutions that can help with exactly this WiFi problem being too weak for PS4 users when it has too many walls or floors along the way, and the Wi-Fi signal that remains failing and the Attrition, the delivery of these connection error messages as error NW-31280-4.

PLC adapters take advantage of the fact that copper wiring can transmit data, as well as electricity, and effectively turn your power outlet into a wired Ethernet connection, without going through Wi-Fi together and gives you the advantages of a cable connection (low latency, higher bandwidth, consistent signal) without having to install long cables through the house.

They can be an excellent solution for players and are worthy of consideration for players if they are on WiFi and they are still suffering from mismatch or receiving these PS4 connection error messages. Watch the video just below a demonstration of how PLC technology works.

In our previous blog we have been discussed about several PS4 errors like PS4 error code nw-31295-0 and here in this blog we are going to discuss another frequently reported PS4 Errors and that are PS4 Error Code NW-31456-9, PS4 Error Code NW-31253-4, PS4 Error Code NW-31280-4, PS4 Error Code NW-34345-9.  If you are struggling with any of the above mention errors then you may totally rely on this blog because we will separately discuss about each and every error in detail of course. So keep scrolling the article.

What is PS4 Error Code NW-31456-9, when does it occur what are its consequences & Reasons and how can I fix it?

In this section we will discuss all the above mentioned queries, so let’s get started. PS4 Error Code NW-31456-9 is a connection error and it is usually gets prompted when a user tries to connect to Play Station Network or play an online mode of a particular game. The above mention error also won’t let you connect with the servers in particular games. The users have also claimed that when the error occurs, it prompts the below mention message on the user’s screen:

“cannot connect to the PSN or game server” or something alike.

In such cases we have also concluded that the users with wireless connections are mostly the victim of all the above mention error codes. And after diving deep into the error code we found few of the potential culprits, we have enlisted them, you may check:

1. One of the major reason t face the Error Code NW-31456-9 is incorrect Network Settings on your PS4. It happens when we intentionally or unintentionally change the settings manually.
2. Sometimes when the game server is unavailable or under maintenance then the chances are quite higher to face the issue.
3. When a user access a particular Play Station Network then they might stuck with the above mention issue
4. Another possible reason to face the error code is improper uninstallation of PS4 and if the software gets corrupted due to any other reasons
5. You ma likely face the above mention error code if your internet connection is not stable.

Troubleshooting Methods for PS4 Error Code NW-31456-9

Method 1: Power Cycle the Router

The very first thing we will suggest you is power cycling your Router. Sometimes it happens when your modem or router are not working properly and gets unresponsive in such scenario you need to power cycle your router to get past the error. To do so all you need is to turn off your device and unplug it from the power source for about 1 minute and the plug in back and check if the issue resolved or not.

Method 2: Set MTU Services properly

While going through the forums like Reddit we found that that some of the users have shared that they manage to get past the error by setting the MTU Services properly. So we suggest you to do the same and for that you may follow the below mention instructions:

• Navigate to your PS4 Home Screen
• Choose Settings> then Network
• Now select Set Up Internet Connection
• After that select either Wi-Fi/LAN Cable depending on your setup
• Choose Custom>and select 1473 for MTU Settings

Method 3: Change DNS Servers

In this method we will recommend you to change your DNS Servers. Several users have claimed success after applying this method, all you need is to manually configure the DNS Settings in order to use Google DNS or other reliable pair of free DNS Servers. Follow the below mention steps to do so:

• Navigate to Settings>Network> Set up Internet Connection
• Now select Wi-Fi on the basis of your connection then plug in to your Router & use wired if yur Wi-Fi is not responding
• Select Custom Setup
• Now you need to run through all the settings as they are, without modifying them until you get to the DNS Settings
• Switch to Manual for DNS Settings
• The input the below mention Google DNS Servers:

  Primary: 8.8.8.8

Secondary: 8.8.4.4

Or you may also go for the below mention DNS Servers:

Open DNS Servers: Primary 208.67.222.222 Secondary 208.67.220.220

Cloudflare DNS Servers: Primary 1.1.1.1 Secondary 1.0.0.1

Note: If one pair of DNS Servers doesn’t works for you then move to another pair.

Method 4: Check PSN Service Status

If you are still struggling with the above mention error code then we will recommend you to check the PSN Service Server. Sometimes it happens when the Play Station Network are not working in a proper way. So you need to check whether the PS Network is down or under maintenance and to do so you need to visit the official PSN Network Service Status Website. If you find that the services are unavailable then you need to wait till the Network gets back to work.

Method 5: Switch to Cable Connection

Most of the users go for wireless connections and as we have stated earlier that wireless connection users are mostly the victims of the above mention error code, so we will suggest you to kindly switch to cable connections because they are more reliable and stable than wireless connections.

 What is PS4 Error Code NW-34345-9 and how can I fix it?

PS4 Error Code NW-34345-9 is the another annoying error of PS4 and as per reports there are multiple reasons for occurring the above mention error but one of the major reason which leads to the current situation is weak Wi-Fi Signal. But some of the users have also claimed that they get stuck with the above mention error is when the try to connect their PS4 to the local Wi-Fi. So, all we can say about this error is it is mainly faced by the users of wireless connections. We have shortlisted few potential fixes, so you may follow our guidelines to get past the error.

Fixes for PS4 Error Code NW-34345-9

Method 1: Hard Reset your Router or Hotspot

This method demands you to hard reset your Router or Hotspot and to do so follow the below mention instructions:

• Firstly Reset your Router
• Ensure that your Router is updated to the latest firmware
• Now move your PS4 and Router closer
• Then Restore the Default Settings on the PS4 by entering to the Safe Mode but choosing the Default Settings option instead. Note: Reset Network Settings to Default but don’t erase any data
• If you leave your PS4 in the Rest Mode for a long period then it may leads the above mention error, you need to turn it off completely and unplug from the power source for some time
• Note: If you are getting NAT errors or using NAT 3 when you try to test your connection, then you need to try DMZ Settings in order to place your console on open NAT & completely open it up to the internet for flawless connection.

Method 2: Update PS4 in Safe Mode

One of the major reasons to face the NW-34345-9 is an outdated PS4 firmware. Updating the PS4 firmware to the latest version has a potential to resolve the error and to do so you may follow the below mention instructions:

• In the first step fully turn off your PS4 console and then press the power button and hold it for 7 seconds , you will see that it will boot in Safe Mode
• Once the PS4 gets into the Safe Mode, select Update System Software option & tap on Update via Internet.
• If your Wi-Fi is still not responding then simply connect to your router with Ethernet
• Once you have updated the PS4 then it will download PS4 firmware system software. When the process gets completed it will restart in normal mode.

Details on PS4 Error Code NW-31280-4 with workable Solutions

This error code is termed as Darker Error code on the PS4. Several users have claimed that they randomly gets prompted by the above mention error code which states that their PS4 is unable to connect to the Internet due to which they cannot play online games. After investigating about the issue we concluded that there can be multiple reasons for facing the same like weak Wi-Fi signals. You may follow the below mention methods to get past the error.

1. Reset your PS4 Router
2. Move the PS4 and Router closer
3. Go for Wired LAN Connections In place of wireless
4. Restore the Default Settings on your PS4 in Safe Mode
5. Try to change the Wi-Fi band of your console that is connected from 2.4 GHz to 5GHz or vice versa

Complete analysis of PS4 Error Code NW-31253-4

On the basis of several users experience we have concluded that the error occurs mostly because of a failed DNS Server but sometimes it may also get encountered due to bad or unstable internet connection. We have listed below the potential culprits and their troubleshooting methods to get past the problem, keep scrolling to know more about the issue.

Reasons and their solutions:

1. Bad internet Connection
2. DNS Server is down
3. Unresponsive Router
4. PSN Server Issues
5. Router Firewall Settings

In the first method we have talk about bad internet connect ion so check if you have a good internet connection or not, if not then switch to another network.

If you are having bad DNS Server then change your DNS Server, changing the DNS has a potential to fix your PS4 issues.

If you rare still struggling with the above mention error then check the PSN Server is working or not, if the PSN Server is down then you need to wait till the server gets back to work, you may check the same on the official PSN Network Service Status Website.

We will also recommend you to power cycle your Router it is also an effective method to solve the issue and have worked for several users.

Closure!!!

My work is done and I have tried my best to provide all the possible fixes for PS4 Error Code NW-31456-9, PS4 Error Code NW-34345-9, PS4 Error Code NW-31280-4, PS4 Error Code NW-31253-4 and now it’s your turn to follow our guidelines depending upon the error code, you are prompted with.

Apart from this do write us on our Facebook and Twitter Page if you have any queries or concerns regarding the same. Thanks for Reading. Have a great day.