-
#2
заменить раму цезаря. cal 830 насколько вижу по инету — к этой неисправности не относится.
-
#3
в апдейтах первый пункт — очистить…
830 с таким серийным номером будет обязательно
-
#4
Это рама Цезаря? Все 4?
сообщение было автоматически прилеплено: Сен 10, 2019
Да не, серийник там …925) затер на фотке
-
#5
речь не про серийник, а по 830 ошибку. да, на картинке оно. нового только такого не бывает — это либо перемаркировка, либо б.у.
830 ошибка скорей всего из-за левых патчей и прочего, не имеющего отношения к CE RAM.
-
#6
Ок, буду заказывать микрухи и пересаживать. Пока есть ошибка по ext CE RAM, я думаю, ничего работать не будет.
830 вылезает только когда уже все возможности DAS по идентификации авто исчерпаны.
-
#8
Если не ошибаюсь память samsung можно заменить на issi IS61C5128AL-10TLI
-
#10
Если не ошибаюсь память samsung можно заменить на issi IS61C5128AL-10TLI
Вопрос решился заменой 4 микросхем памяти RAM. В моем мультике стояли ISSY IS61LV5128AL-10TLI, заменил на Samsung K6R4008C1D-UI10.
If you have installed Xentry/Das like me ,and meet this problem ,how to do ? After i made xentry and das registration i have error connection. I have try many bin files but the same.
When SDconnect C4 recognise car voltage, can’t recognise vin so doesn’t make diagnosis !
Photos of error message:
DAS CAL 830 ERROR 1
DAS CAL 830 ERROR 2
DAS CAL 830 ERROR 3
sdconndect config
vin error
Please help to resolve my problem !
Reply:
DAS CAL830 error is because this new DAS was never intended to be used with an old Part D MUX..
To solve DAS CAL830 error:
Change bin file
Before change bin you must rename your old bin..
Maybe you already have Mixed bin at your DAS program..
Source:
Issue from sd connect c4 user:
Hello i have installed Xentry/Das. After i made xentry and das registration i have error connection. I have try many bin files but the same.
When SDconnect C4recognise car voltage, can’t recognise vin so doesn’t make diagnosis !
Photos of error message:
DAS CAL 830 ERROR 1
DAS CAL 830 ERROR 2
DAS CAL 830 ERROR 3
sdconndect config
vin error
Please help to resolve my problem !
Reply:
DAS CAL830 error is because this new DAS was never intended to be used with an old Part D MUX..
To solve DAS CAL830 error:
Change bin file
Before change bin you must rename your old bin..
Maybe you already have Mixed bin at your DASprogram..
(Visited 239 times, 1 visits today)
- DAS
- MB SD C4
- MB star C4
- SD Connect C4
- V2017.9 MB STAR
- Xentry
Tips and guides for DAS fault (1.1)-99.830.0 and error 830:
Tips and guides
The das standalone is a patch, the bin folder fixes are associated with the same version of the standalone patch.
They replace the bin folder to match the version of the standalone patch if you are not running the same version of Das
The only place the bin folder fixes belong is in the bin as I have stated in the past. These type of solutions are derived from the Abu Dhabi con men of self appointed experts (JC disciples).They create solutions, which creates new problems, then create solutions to the problems that they have created…it’s an endless cycle of regurgitating shit all in there own self contained bubble.
Every now and then someone escapes the bubble wanting know what the hell is going on
You need a patched das32r2.exe for the version of das you are running, nothing more nothing less.
You don’t need to rename it and have the original file for xentry and the patched as standalone, it will work for both
You don’t need to modify SimDas to point to the renamed patched version, it will work with the mod
All of these bullshit solutions come from the Abu Dhabi boys in there self contained bubble of shit!!!!
For those who are in the know, they will tell you that you don’t even need the modded file to be able to run it in standalone
Btw, I always have the solution, I was the first to mod it without bin folder bubble replacements.
I suggest you re-read your first post again, I just told you why you are getting that problem without directly telling you why
Regards
Impactops
car diagnostic tool , obd2 software
-
28th January, 2015, 01:04 PM
#1
Hi i have installed xentry das 03.2014 version. After i made xentry and das registration i have error connection. I have try many bin files but same.
When sdconnect recognise car voltage , cannt recognise vin so dosent make diagnose !Please help to resolve my problem !Regards
-
28th January, 2015, 11:36 PM
#2
What Patch are you using to run DAS standalone?
-
29th January, 2015, 10:28 PM
#3
No patch , different bin folders, include das standalone!
-
30th January, 2015, 08:28 AM
#4
Originally Posted by kumbari
No patch , different bin folders, include das standalone!
The das standalone is a patch, the bin folder fixes are associated with the same version of the standalone patch.
They replace the bin folder to match the version of the standalone patch if you are not running the same version of DasThe only place the bin folder fixes belong is in the bin as I have stated in the past. These type of solutions are derived from the Abu Dhabi con men of self appointed experts (JC disciples).They create solutions, which creates new problems, then create solutions to the problems that they have created…it’s an endless cycle of regurgitating shit all in there own self contained bubble.
Every now and then someone escapes the bubble wanting know what the hell is going on
You need a patched das32r2.exe for the version of das you are running, nothing more nothing less.
You don’t need to rename it and have the original file for xentry and the patched as standalone, it will work for both
You don’t need to modify SimDas to point to the renamed patched version, it will work with the modAll of these bullshit solutions come from the Abu Dhabi boys in there self contained bubble of shit!!!!
For those who are in the know, they will tell you that you don’t even need the modded file to be able to run it in standalone
Regards
Impactops
-
30th January, 2015, 09:40 AM
#5
Originally Posted by impactops
The das standalone is a patch, the bin folder fixes are associated with the same version of the standalone patch.
They replace the bin folder to match the version of the standalone patch if you are not running the same version of DasThe only place the bin folder fixes belong is in the bin as I have stated in the past. These type of solutions are derived from the Abu Dhabi con men of self appointed experts (JC disciples).They create solutions, which creates new problems, then create solutions to the problems that they have created…it’s an endless cycle of regurgitating shit all in there own self contained bubble.
Every now and then someone escapes the bubble wanting know what the hell is going on
You need a patched das32r2.exe for the version of das you are running, nothing more nothing less.
You don’t need to rename it and have the original file for xentry and the patched as standalone, it will work for both
You don’t need to modify SimDas to point to the renamed patched version, it will work with the modAll of these bullshit solutions come from the Abu Dhabi boys in there self contained bubble of shit!!!!
For those who are in the know, they will tell you that you don’t even need the modded file to be able to run it in standalone
Regards
ImpactopsSo do you have any solution or not?
-
30th January, 2015, 12:18 PM
#6
I always have the solution, I was the first to mod it without bin folder bubble replacements.
Have I posted on this forum? what do you think?
I suggest you re-read your first post again, I just told you why you are getting that problem without directly telling you why
Regards
Impactops
-
The Following User Says Thank You to impactops For This Useful Post:
kumbari (30th January, 2015)
-
30th January, 2015, 01:12 PM
#7
Originally Posted by impactops
I always have the solution, I was the first to mod it without bin folder bubble replacements.
Have I posted on this forum? what do you think?
I suggest you re-read your first post again, I just told you why you are getting that problem without directly telling you why
Regards
ImpactopsHi friend ! Can you help me to solve that problem ? If you need any skype write on pm ! Thanks !
-
30th January, 2015, 01:27 PM
#8
Originally Posted by impactops
I always have the solution, I was the first to mod it without bin folder bubble replacements.
Have I posted on this forum? what do you think?
I suggest you re-read your first post again, I just told you why you are getting that problem without directly telling you why
Regards
ImpactopsAs you write : ou need a patched das32r2.exe for the version of das you are running, nothing more nothing less.
You don’t need to rename it and have the original file for xentry and the patched as standalone, it will work for both
You don’t need to modify SimDas to point to the renamed patched version, it will work with the modI cannt understand what happen becasue i have 2 c4 buy on different sellers , both have same serial : 101044. One has that problems on the fist time i used , and after no more problems ! the second one i buy one week ago and have the same symptoms but cannt resolve the problem !
Originally Posted by kumbari