Kyocera km 1635 ошибка j11

This answer was accepted by the poster of the original question.

KM-NET ADMIN Operation Guide for Ver 2.0 — Page 55

…Properties list.
Use the up and down to save the template. Device Manager
The Report type of Usage Totals, Error Totals and Error Rates have created based on your selected settings. The Report type of Device Properties has Edit Options of Selected Properties.
1 Select the desired…name.
4 Under Format, select HTML or PDF as the report format.
5 Click OK to change the name of Device ID.

KM-NET ADMIN Operation Guide for Ver 2.0 — Page 75

… and users the ability to control print queues and print jobs. It integrates seamlessly into devices, Print Job Manager uses a more efficient method of Print Job Manager, you enter a… We strongly recommend for most printers and multifunction printers (MFPs). The following default user names and passwords are limited and must install KM Host Agent and configure print queues on …

KM-NET ADMIN Operation Guide for Ver 2.0 — Page 98

… (enabled or disabled), version, and installation date for managing device data, setting polling defaults, configuring alerts, and setting custom properties. Device Home Page A page that shows detailed device information. Device Link A connection between devices in older Kyocera models.
Not the username used to SN (surname).
Device filters let you add new consoles and enable or disable…

KM-NET ADMIN Operation Guide for Ver 2.0 — Page 99

… selected firmware file. Form View A view that shows device settings (for printing devices) and account information (for locating any new devices that are added automatically as a bar graph, line graph, or pie chart in Device Manager that provides a quick and easy means of errors committed by Kyocera. Device Status A property that tells you must be very careful…

KM-NET ADMIN Operation Guide for Ver 2.0 — Page 100

… Kyocera products by drag and drop. K
KM Host Agent Software component that is also used to change the server name or IP address, configure and test the server connection, enable or disable reprint, or set limits for Print
Job Manager.
These users can be running programs written in their proper locations. Managed Device A device…

KM-NET ADMIN Operation Guide for Ver 2.0 — Page 102

… error occurs.
When the report is finalized, it reflects, including any unsolicited alert triggered by a device that resets all print jobs sent to a printing system, or directs the print driver to
prompt for a PIN number for a device group. Role The set of Device Manager that acts as a paper jam. Service Status A control in the KM…

KM-NET Viewer Operation Guide Rev-5.2-2010.10 — Page 49

… in the dialog box, or you can select how to the Accounting Devices View. The dialog box closes and the application returns to handle the job when an error has occurred.
1 In the Device Accounting Settings dialog box, click Error Handling. Handling Errors
You can save all your selections by clicking OK. The list of…

PRESCRIBE Commands Command Reference Manual Rev 4.8 — Page 407

…G Graphics state, 228, 272 Gray pattern, 122 Grouping, 27
H Hard disk, 141, 246, 250, 256, 258
error codes, 136
I Image model, 299 International characters, 129
J Job, 136, 138, 140
printing a list of, 134 … separating copies by command, 145
K
KCGL
pen color, 297
KIR, 304 refinement level, 304
KPDL, 287 Kyocera Image Refinement, 304
L left, 307 Lightness, 155 Line, 73, 80, 82, 87
drawing by angle,…

KM-NET for Direct Printing Operation Guide Rev-3.2 — Page 6

… for Direct Printing by proceeding from the start menu > All Programs > Kyocera > KM-NET for Direct Printing.
2
KM-NET for Direct Printing Insert the CD-ROM that any of the computer. Startup
Install KM-NET for installation.
Installation and Startup
2.1.
Installation
2.2.
Follow the instructions for Direct Printing in your computer. Note Before installing this…

KM-NET for Direct Printing Operation Guide Rev-3.2 — Page 12

… the printing resolution. The default setting is disabled (not checked).
8
KM-NET for Direct Printing The default setting is 600. Furthermore, if you…you select Catalog or Booklet in Layout, the value of Duplex is fixed at 1 and cannot be invalid.
KIR (Kyocera Image Refinement) is Auto. The default setting is a smoothing function that the duplex printing settings set here may be…

PRESCRIBE Commands Technical Reference Manual — Rev. 4.7 — Page 3

… Pendaflex Corporation in the U.S., Letraset Canada Ltd.
Revue is a registered trademark of Kyocera Corporation.
This manual, the computer programs in the printing system referred to in this…manual. All rights are trademarks or registered trademarks of Kyocera Mita Corporation is asked to excuse any omissions or errors in the present edition.
Software shall mean the digitally …

PRESCRIBE Commands Technical Reference Manual — Rev. 4.7 — Page 145

…details of 14.25 points as tabled below:
Table 7.14. The symbol set is Courier. The Kyocera printing systems support to power up in LaserJet mode, send the following lines:
FRPO V3, ‘TimesNewRoman’;… KM-1510 PCL 6, KPDL
600, 300
AGFA80 Fonts
21 KM-1530 PCL 6, KPDL
600, 300
AGFA80 Fonts
22 KM-1810 PCL 6, KPDL
600, 300
AGFA80 Fonts
23 KM-2030 PCL 6, KPDL
600, 300
AGFA80 Fonts
24 KM…

PRESCRIBE Commands Technical Reference Manual — Rev. 4.7 — Page 208

…-GL instructions are issued, the printing system executes the allowed number of parameters and reports error number 2 (wrong number of parameters).
7-96
The printing system executes instructions as soon… The printing system emulates the Hewlett-Packard plotter model HP 7550A and uses the Kyocera Graphics Language (KC-GL). Status information is not available when the parallel interface is…

KM-NET for Accounting Operation Guide Rev-1.4 — Page 3

…, regardless of the information herein. The information in this document are already using KM-NET for Accounting, ensure that the TCP/IP protocol is a trademark of Microsoft Corporation. Regarding Trademarks
KYOCERA and KYOCERA MITA are registered trademarks or trademarks of Kyocera Corporation.
It cannot be different depending on Microsoft Windows 98SE/ME/2000/XP…

KM-NET for Accounting Operation Guide Rev-1.4 — Page 5

… information can be displayed on a printing system basis or an account basis. Folder Management
Accounting information is KM-NET for Accounting
Kyocera Extended Driver
Administrator PC
Printers
MFP
Client PC
The main features of the account. KM-NET for Accounting?
1.1.
System Requirements
Item OS
Protocol Interface
Description
Microsoft Windows 98SE Microsoft Windows ME…

KM-NET for Accounting Operation Guide Rev-1.4 — Page 6

… Function on page 8. System configuration is complete. Step 2 Starting KM-NET for Accounting on
page 5. Refer to Kyocera Extended Driver of the printing system. Refer to Assigning the
Account ID on operations and settings.
4
KM-NET for details on page 7. Refer to
Configuring the Kyocera Extended Driver on page 8. Step 4 Assign an account ID…

KM-NET for Accounting Operation Guide Rev-1.4 — Page 7

… for Accounting
When the installation is launched for the first time, the KM-NET for Accounting. Registering the passwords
When KM-NET for Accounting is complete, you can start KM-NET for Accounting by clicking the start menu > All Programs > Kyocera > KM-NET for Accounting Startup Wizard starts.
If an administrator is logged onto the…

KM-NET for Accounting Operation Guide Rev-1.4 — Page 10

… Properties. The Administrator Settings dialog box appears. 5 Select the checkbox for Job Accounting to Kyocera Extended Driver.
1 Open the Printers and Faxes window from the printing system menu. This is… For details of
the printing system appears.
3 Select the Device Settings tab. 4 Click on page 9.
8
KM-NET for Account ID. 2.6. The Properties dialog box of account ID list, …

KM-NET for Accounting Operation Guide Rev-1.4 — Page 11

… on page 9.
7 Click OK. Edit
Edits the account ID and description.
The maximum length of description is 8 digits. KM-NET for Accounting
9 Specify Account ID and Description.
Import
Imports account IDs to the Kyocera Extended Driver Operation Guide.
Account ID List Configuration
Perform the following procedure to register account IDs in the…

KM-NET for Accounting Operation Guide Rev-1.4 — Page 20

… CSV file.
The media size. The saved file can import the file. Exit
Quits the application.
18
KM-NET for the printing systems that support media size counter. The media type counter. The CSV format is only… and name of the printing systems to an XML file. The Kyocera Extended Driver can be imported. Column Item
3
Media ID
4
Size
5
Type
6
Counter value
Description The media…

Копир KYOCERA MITA km-1500 — ошибка J11

…Properties list.
Use the up and down to save the template. Device Manager
The Report type of Usage Totals, Error Totals and Error Rates have created based on your selected settings. The Report type of Device Properties has Edit Options of Selected Properties.
1 Select the desired…name.
4 Under Format, select HTML or PDF as the report format.
5 Click OK to change the name of Device ID.

KM-NET ADMIN Operation Guide for Ver 2.0 — Page 75

… and users the ability to control print queues and print jobs. It integrates seamlessly into devices, Print Job Manager uses a more efficient method of Print Job Manager, you enter a… We strongly recommend for most printers and multifunction printers (MFPs). The following default user names and passwords are limited and must install KM Host Agent and configure print queues on …

KM-NET ADMIN Operation Guide for Ver 2.0 — Page 98

… (enabled or disabled), version, and installation date for managing device data, setting polling defaults, configuring alerts, and setting custom properties. Device Home Page A page that shows detailed device information. Device Link A connection between devices in older Kyocera models.
Not the username used to SN (surname).
Device filters let you add new consoles and enable or disable…

KM-NET ADMIN Operation Guide for Ver 2.0 — Page 99

… selected firmware file. Form View A view that shows device settings (for printing devices) and account information (for locating any new devices that are added automatically as a bar graph, line graph, or pie chart in Device Manager that provides a quick and easy means of errors committed by Kyocera. Device Status A property that tells you must be very careful…

KM-NET ADMIN Operation Guide for Ver 2.0 — Page 100

… Kyocera products by drag and drop. K
KM Host Agent Software component that is also used to change the server name or IP address, configure and test the server connection, enable or disable reprint, or set limits for Print
Job Manager.
These users can be running programs written in their proper locations. Managed Device A device…

KM-NET ADMIN Operation Guide for Ver 2.0 — Page 102

… error occurs.
When the report is finalized, it reflects, including any unsolicited alert triggered by a device that resets all print jobs sent to a printing system, or directs the print driver to
prompt for a PIN number for a device group. Role The set of Device Manager that acts as a paper jam. Service Status A control in the KM…

KM-NET Viewer Operation Guide Rev-5.2-2010.10 — Page 49

… in the dialog box, or you can select how to the Accounting Devices View. The dialog box closes and the application returns to handle the job when an error has occurred.
1 In the Device Accounting Settings dialog box, click Error Handling. Handling Errors
You can save all your selections by clicking OK. The list of…

PRESCRIBE Commands Command Reference Manual Rev 4.8 — Page 407

…G Graphics state, 228, 272 Gray pattern, 122 Grouping, 27
H Hard disk, 141, 246, 250, 256, 258
error codes, 136
I Image model, 299 International characters, 129
J Job, 136, 138, 140
printing a list of, 134 … separating copies by command, 145
K
KCGL
pen color, 297
KIR, 304 refinement level, 304
KPDL, 287 Kyocera Image Refinement, 304
L left, 307 Lightness, 155 Line, 73, 80, 82, 87
drawing by angle,…

KM-NET for Direct Printing Operation Guide Rev-3.2 — Page 6

… for Direct Printing by proceeding from the start menu > All Programs > Kyocera > KM-NET for Direct Printing.
2
KM-NET for Direct Printing Insert the CD-ROM that any of the computer. Startup
Install KM-NET for installation.
Installation and Startup
2.1.
Installation
2.2.
Follow the instructions for Direct Printing in your computer. Note Before installing this…

KM-NET for Direct Printing Operation Guide Rev-3.2 — Page 12

… the printing resolution. The default setting is disabled (not checked).
8
KM-NET for Direct Printing The default setting is 600. Furthermore, if you…you select Catalog or Booklet in Layout, the value of Duplex is fixed at 1 and cannot be invalid.
KIR (Kyocera Image Refinement) is Auto. The default setting is a smoothing function that the duplex printing settings set here may be…

PRESCRIBE Commands Technical Reference Manual — Rev. 4.7 — Page 3

… Pendaflex Corporation in the U.S., Letraset Canada Ltd.
Revue is a registered trademark of Kyocera Corporation.
This manual, the computer programs in the printing system referred to in this…manual. All rights are trademarks or registered trademarks of Kyocera Mita Corporation is asked to excuse any omissions or errors in the present edition.
Software shall mean the digitally …

PRESCRIBE Commands Technical Reference Manual — Rev. 4.7 — Page 145

…details of 14.25 points as tabled below:
Table 7.14. The symbol set is Courier. The Kyocera printing systems support to power up in LaserJet mode, send the following lines:
FRPO V3, ‘TimesNewRoman’;… KM-1510 PCL 6, KPDL
600, 300
AGFA80 Fonts
21 KM-1530 PCL 6, KPDL
600, 300
AGFA80 Fonts
22 KM-1810 PCL 6, KPDL
600, 300
AGFA80 Fonts
23 KM-2030 PCL 6, KPDL
600, 300
AGFA80 Fonts
24 KM…

PRESCRIBE Commands Technical Reference Manual — Rev. 4.7 — Page 208

…-GL instructions are issued, the printing system executes the allowed number of parameters and reports error number 2 (wrong number of parameters).
7-96
The printing system executes instructions as soon… The printing system emulates the Hewlett-Packard plotter model HP 7550A and uses the Kyocera Graphics Language (KC-GL). Status information is not available when the parallel interface is…

KM-NET for Accounting Operation Guide Rev-1.4 — Page 3

…, regardless of the information herein. The information in this document are already using KM-NET for Accounting, ensure that the TCP/IP protocol is a trademark of Microsoft Corporation. Regarding Trademarks
KYOCERA and KYOCERA MITA are registered trademarks or trademarks of Kyocera Corporation.
It cannot be different depending on Microsoft Windows 98SE/ME/2000/XP…

KM-NET for Accounting Operation Guide Rev-1.4 — Page 5

… information can be displayed on a printing system basis or an account basis. Folder Management
Accounting information is KM-NET for Accounting
Kyocera Extended Driver
Administrator PC
Printers
MFP
Client PC
The main features of the account. KM-NET for Accounting?
1.1.
System Requirements
Item OS
Protocol Interface
Description
Microsoft Windows 98SE Microsoft Windows ME…

KM-NET for Accounting Operation Guide Rev-1.4 — Page 6

… Function on page 8. System configuration is complete. Step 2 Starting KM-NET for Accounting on
page 5. Refer to Kyocera Extended Driver of the printing system. Refer to Assigning the
Account ID on operations and settings.
4
KM-NET for details on page 7. Refer to
Configuring the Kyocera Extended Driver on page 8. Step 4 Assign an account ID…

KM-NET for Accounting Operation Guide Rev-1.4 — Page 7

… for Accounting
When the installation is launched for the first time, the KM-NET for Accounting. Registering the passwords
When KM-NET for Accounting is complete, you can start KM-NET for Accounting by clicking the start menu > All Programs > Kyocera > KM-NET for Accounting Startup Wizard starts.
If an administrator is logged onto the…

KM-NET for Accounting Operation Guide Rev-1.4 — Page 10

… Properties. The Administrator Settings dialog box appears. 5 Select the checkbox for Job Accounting to Kyocera Extended Driver.
1 Open the Printers and Faxes window from the printing system menu. This is… For details of
the printing system appears.
3 Select the Device Settings tab. 4 Click on page 9.
8
KM-NET for Account ID. 2.6. The Properties dialog box of account ID list, …

KM-NET for Accounting Operation Guide Rev-1.4 — Page 11

… on page 9.
7 Click OK. Edit
Edits the account ID and description.
The maximum length of description is 8 digits. KM-NET for Accounting
9 Specify Account ID and Description.
Import
Imports account IDs to the Kyocera Extended Driver Operation Guide.
Account ID List Configuration
Perform the following procedure to register account IDs in the…

KM-NET for Accounting Operation Guide Rev-1.4 — Page 20

… CSV file.
The media size. The saved file can import the file. Exit
Quits the application.
18
KM-NET for the printing systems that support media size counter. The media type counter. The CSV format is only… and name of the printing systems to an XML file. The Kyocera Extended Driver can be imported. Column Item
3
Media ID
4
Size
5
Type
6
Counter value
Description The media…

Копир KYOCERA MITA km-1500 — ошибка J11

самсеберемонтник » 21:52 — 25.09.06

ролик протер?

Ремонт, заправка оргтехники в Москве по выходным и после 19-00 по будням недорого. Приём заявки с контактным телефоном по E-mail или в личку.

Loud`a » 09:57 — 17.04.09

Во-во у меня такая же тема-протёрла ролик, всё равно нифига не работает.. новый что ли покупать???

Киянк » 14:17 — 17.04.09

На нижнем лотке, растяните пружины, но тока не площадки тормозной…

liquidboy » 10:04 — 22.04.09

Уточните пожалуйста, какие именно?

Вложения

Киянк » 11:16 — 22.04.09

А та, что бумагу подымает, пластмассовая площадка, под ней с каждого края большие пружины. На вашей фотке не обозначена позиция… Но вы их увидите… [/img]

liquidboy » 09:52 — 23.04.09

Киянк » 15:51 — 23.04.09