В служебных программах или заданиях, загружаемых в устройство, иногда могут содержаться ресурсы (например, шрифты, макрокоманды или шаблоны). Ресурсы, помеченные как постоянные, остаются в памяти устройства до выключения питания.
Воспользуйтесь следующими рекомендациями, если требуется пометить те или иные ресурсы как постоянные с помощью языка описания страниц (PDL). Техническую информацию см. в разделе справочника по PCL или PS, посвященном языку PDL.
-
Помечайте ресурсы как постоянные только в том случае, если их действительно необходимо сохранять в памяти устройства, пока оно включено.
-
Постоянные ресурсы следует передавать на устройство только в начале задания печати, а не во время выполнения печати.
Примечание.
Чрезмерное использование постоянных ресурсов или их загрузка во время выполнения печати может негативно повлиять на производительность устройства или на его возможность печатать сложные страницы.
Содержание
- PostScript Printers Print «Insufficient Memory» Error Message
- Symptoms
- Cause
- Resolution
- Workaround
- More Information
- PostScript Printers Print «Insufficient Memory» Error Message
- Symptoms
- Cause
- Resolution
- Workaround
- More Information
- PostScript Printers Print «Insufficient Memory» Error Message
- Symptoms
- Cause
- Resolution
- Workaround
- More Information
- Вывод сообщения об ошибке «недостаточно памяти» на принтерах PostScript
- Проблемы
- Причина
- Решение
- Обходное решение
- Дополнительная информация
- Thread: Printing Issue — Insufficient Memory error Message
- Printing Issue — Insufficient Memory error Message
- Re: Printing Issue — Insufficient Memory error Message
- Re: Printing Issue — Insufficient Memory error Message
- Re: Printing Issue — Insufficient Memory error Message
- Re: Printing Issue — Insufficient Memory error Message
PostScript Printers Print «Insufficient Memory» Error Message
Symptoms
When you try to print a document on a PostScript printer, only a portion of the document may be printed. Also, the printer may print a page that indicates that the printer is out of memory. For example, the printer may print a page with the following text:
This job requires more memory than is available in this printer. Try on or more of the following and then print again:
For the output format choose Optimize for portability.
Reduce the number of fonts in this document.
Print the document in parts.
Cause
This issue may occur if the printer does not have enough memory to complete the PostScript print job. For example, if your document contains TrueType fonts that are downloaded as Type42 (outline) fonts, your printer may not have enough memory to perform the Type42 font download in native TrueType format. When the printer tries to allocate space for the font download, the printer overruns its memory.
Resolution
To resolve this issue, add more physical memory to the printer. For information about how to do so, view the documentation that was included with your printer.
Workaround
To work around this issue, reduce the complexity of your PostScript print job. For example, set the TrueType Font Download option to Automatic, Outline, or Bitmap as follows:
In Control Panel, open the Printers (or Printers and Faxes) folder.
Right-click your PostScript printer, and then click Properties.
Click Printing Preferences, click Layout, and then click Advanced.
Double-click PostScript Options, and then click TrueType Font Download Option.
In the True Type Font Download Option box, click Automatic. If Automatic is already selected, click Outline or Bitmap.
Close the Printer Properties dialog box, and then close Control Panel.
More Information
Microsoft has confirmed that this issue can occur when you use the PostScript printer driver that is included with Windows to print a PostScript job to any of the following printers:
Источник
PostScript Printers Print «Insufficient Memory» Error Message
Symptoms
When you try to print a document on a PostScript printer, only a portion of the document may be printed. Also, the printer may print a page that indicates that the printer is out of memory. For example, the printer may print a page with the following text:
This job requires more memory than is available in this printer. Try on or more of the following and then print again:
For the output format choose Optimize for portability.
Reduce the number of fonts in this document.
Print the document in parts.
Cause
This issue may occur if the printer does not have enough memory to complete the PostScript print job. For example, if your document contains TrueType fonts that are downloaded as Type42 (outline) fonts, your printer may not have enough memory to perform the Type42 font download in native TrueType format. When the printer tries to allocate space for the font download, the printer overruns its memory.
Resolution
To resolve this issue, add more physical memory to the printer. For information about how to do so, view the documentation that was included with your printer.
Workaround
To work around this issue, reduce the complexity of your PostScript print job. For example, set the TrueType Font Download option to Automatic, Outline, or Bitmap as follows:
In Control Panel, open the Printers (or Printers and Faxes) folder.
Right-click your PostScript printer, and then click Properties.
Click Printing Preferences, click Layout, and then click Advanced.
Double-click PostScript Options, and then click TrueType Font Download Option.
In the True Type Font Download Option box, click Automatic. If Automatic is already selected, click Outline or Bitmap.
Close the Printer Properties dialog box, and then close Control Panel.
More Information
Microsoft has confirmed that this issue can occur when you use the PostScript printer driver that is included with Windows to print a PostScript job to any of the following printers:
Источник
PostScript Printers Print «Insufficient Memory» Error Message
Symptoms
When you try to print a document on a PostScript printer, only a portion of the document may be printed. Also, the printer may print a page that indicates that the printer is out of memory. For example, the printer may print a page with the following text:
This job requires more memory than is available in this printer. Try on or more of the following and then print again:
For the output format choose Optimize for portability.
Reduce the number of fonts in this document.
Print the document in parts.
Cause
This issue may occur if the printer does not have enough memory to complete the PostScript print job. For example, if your document contains TrueType fonts that are downloaded as Type42 (outline) fonts, your printer may not have enough memory to perform the Type42 font download in native TrueType format. When the printer tries to allocate space for the font download, the printer overruns its memory.
Resolution
To resolve this issue, add more physical memory to the printer. For information about how to do so, view the documentation that was included with your printer.
Workaround
To work around this issue, reduce the complexity of your PostScript print job. For example, set the TrueType Font Download option to Automatic, Outline, or Bitmap as follows:
In Control Panel, open the Printers (or Printers and Faxes) folder.
Right-click your PostScript printer, and then click Properties.
Click Printing Preferences, click Layout, and then click Advanced.
Double-click PostScript Options, and then click TrueType Font Download Option.
In the True Type Font Download Option box, click Automatic. If Automatic is already selected, click Outline or Bitmap.
Close the Printer Properties dialog box, and then close Control Panel.
More Information
Microsoft has confirmed that this issue can occur when you use the PostScript printer driver that is included with Windows to print a PostScript job to any of the following printers:
Источник
Вывод сообщения об ошибке «недостаточно памяти» на принтерах PostScript
Проблемы
При попытке напечатать документ на принтере PostScript может быть распечатан только часть документа. Кроме того, принтер может распечатать страницу, указывающую на то, что в принтере недостаточно памяти. Например, принтер может напечатать страницу со следующим текстом:
Для этого задания требуется больше памяти, чем доступно на этом принтере. Попробуйте выполнить указанные ниже действия, а затем повторите печать. для формата вывода нажмите кнопку оптимизировать для обеспечения переносимости. Уменьшите количество шрифтов в документе. Печать документа в частях.
Причина
Эта проблема может возникать, если у принтера недостаточно памяти для выполнения задания печати PostScript. Например, если документ содержит шрифты TrueType, загруженные в виде шрифтов Type42 (контуров), возможно, у принтера недостаточно памяти, чтобы выполнить загрузку Type42 шрифта в исходном формате TrueType. Когда принтер попытается выделить место для скачивания шрифта, принтер перезапустит память.
Решение
Чтобы устранить эту проблему, добавьте к принтеру дополнительный объем оперативной памяти. Сведения о том, как это сделать, можно найти в документации, которая была включена в принтер.
Обходное решение
Для решения этой проблемы Уменьшите сложность задания печати в PostScript. Например, установите для параметра Загрузка шрифта TrueType значение автоматически, структурироватьили точечный рисунок , как показано ниже.
На панели управления откройте папку Принтеры (или принтеры и факсы).
Щелкните правой кнопкой мыши принтер PostScript и выберите пункт Свойства.
Выберите Параметры печати, нажмите кнопку Макети выберите пункт Дополнительно.
Дважды щелкните пункт Параметры PostScriptи выберите пункт Загрузка шрифта TrueType.
В поле Истина для типа загружаемого шрифта выберите вариант Авто. Если флажок Автоматическое подключение уже установлен, нажмите кнопку контур или точечный рисунок.
Закройте диалоговое окно » Свойства принтера » и закройте панель управления.
Дополнительная информация
Корпорация Майкрософт подтвердила, что эта проблема может возникать при использовании драйвера принтера PostScript, который входит в состав Windows, для печати задания PostScript на любом из указанных ниже принтеров.
Источник
Thread: Printing Issue — Insufficient Memory error Message
Thread Tools
Display
Printing Issue — Insufficient Memory error Message
Hello Experts,
I’ve been trying to print a PDF (Doc size is 1.9MB) but I am not getting good results.
Every time I try to print, a sheet come out of the printer with the following message:
Now, I have a P4 with 3GB RAM running Ubuntu 8.10. Before printing I checked the System Monitor application and I notice that I was only using 400MB out of 3GB. This is my first issue that I’m having with my printer and this is the only doc that I cannot print. The rest works fine ( with smaller docs)
Thank you very much for your support!
Re: Printing Issue — Insufficient Memory error Message
Hello Experts,
I’ve been trying to print a PDF (Doc size is 1.9MB) but I am not getting good results.
Every time I try to print, a sheet come out of the printer with the following message:
Now, I have a P4 with 3GB RAM running Ubuntu 8.10. Before printing I checked the System Monitor application and I notice that I was only using 400MB out of 3GB. This is my first issue that I’m having with my printer and this is the only doc that I cannot print. The rest works fine ( with smaller docs)
Thank you very much for your support!
Do you have sufficient disk space in /tmp ?
Re: Printing Issue — Insufficient Memory error Message
That error message means the PCL interpreter in the printer does not have enough memory to print the document. It has nothing to do with the amount of memory in your computer.
1.9 MB is quite large for a single page of PDF.
I’m guessing that you have a laser since most inkjets that use PCL(usually HP) don’t go beyond PCL3 and usually don’t print those kinds of messages.
With a laser, the printer has to convert an entire page at a time into a giant bitmap. This implies that the printer needs to have enough memory built in to hold both 1 page of data sent from the computer AND the bitmap for the laser print engine. The file you are trying to print is apparently complex enough(or large enough) that the printer is running out of memory during the processing.
You might be able to print at «draft» resolution.
Last edited by gsocker; January 1st, 2009 at 05:33 AM .
Re: Printing Issue — Insufficient Memory error Message
You could use the pdf2ps command to convert the pdf to ps
you can then use ghostcript to print the file
see here-
http://tldp.org/HOWTO/Printing-Usage-HOWTO-3.html
Last edited by linux_tech; January 1st, 2009 at 06:22 AM .
Re: Printing Issue — Insufficient Memory error Message
That error message means the PCL interpreter in the printer does not have enough memory to print the document. It has nothing to do with the amount of memory in your computer.
1.9 MB is quite large for a single page of PDF.
I’m guessing that you have a laser since most inkjets that use PCL(usually HP) don’t go beyond PCL3 and usually don’t print those kinds of messages.
With a laser, the printer has to convert an entire page at a time into a giant bitmap. This implies that the printer needs to have enough memory built in to hold both 1 page of data sent from the computer AND the bitmap for the laser print engine. The file you are trying to print is apparently complex enough(or large enough) that the printer is running out of memory during the processing.
You might be able to print at «draft» resolution.
Thanks gsocker, your explanation sounds very reasonable. And you were right, I have Laser printer (Samsung ML-6060).
Источник
Содержание
- Вывод сообщения об ошибке «недостаточно памяти» на принтерах PostScript
- Проблемы
- Причина
- Решение
- Обходное решение
- Дополнительная информация
- Исправить ошибку pcl xl error при печати на принтере
- 1. Устранение неполадок
- 2. Удалить драйвер принтера
- 3. Изменить параметры печати
- Insufficient memory ошибка принтера hp 2015
- HP laserjet p2015 (insuficient memory)
- PostScript Printers Print «Insufficient Memory» Error Message
- Symptoms
- Cause
- Resolution
- Workaround
- More Information
- HP Printer PCL XL Error Insufficient Memory
- Insufficient Memory PCL XL Error Code HP Printer
- Causes Insufficient Memory Error Message HP Printer Machine
- Troubleshooting Steps HP Printer Error PCL XL Error Insufficient Memory
Вывод сообщения об ошибке «недостаточно памяти» на принтерах PostScript
Проблемы
При попытке напечатать документ на принтере PostScript может быть распечатан только часть документа. Кроме того, принтер может распечатать страницу, указывающую на то, что в принтере недостаточно памяти. Например, принтер может напечатать страницу со следующим текстом:
Для этого задания требуется больше памяти, чем доступно на этом принтере. Попробуйте выполнить указанные ниже действия, а затем повторите печать. для формата вывода нажмите кнопку оптимизировать для обеспечения переносимости. Уменьшите количество шрифтов в документе. Печать документа в частях.
Причина
Эта проблема может возникать, если у принтера недостаточно памяти для выполнения задания печати PostScript. Например, если документ содержит шрифты TrueType, загруженные в виде шрифтов Type42 (контуров), возможно, у принтера недостаточно памяти, чтобы выполнить загрузку Type42 шрифта в исходном формате TrueType. Когда принтер попытается выделить место для скачивания шрифта, принтер перезапустит память.
Решение
Чтобы устранить эту проблему, добавьте к принтеру дополнительный объем оперативной памяти. Сведения о том, как это сделать, можно найти в документации, которая была включена в принтер.
Обходное решение
Для решения этой проблемы Уменьшите сложность задания печати в PostScript. Например, установите для параметра Загрузка шрифта TrueType значение автоматически, структурироватьили точечный рисунок , как показано ниже.
На панели управления откройте папку Принтеры (или принтеры и факсы).
Щелкните правой кнопкой мыши принтер PostScript и выберите пункт Свойства.
Выберите Параметры печати, нажмите кнопку Макети выберите пункт Дополнительно.
Дважды щелкните пункт Параметры PostScriptи выберите пункт Загрузка шрифта TrueType.
В поле Истина для типа загружаемого шрифта выберите вариант Авто. Если флажок Автоматическое подключение уже установлен, нажмите кнопку контур или точечный рисунок.
Закройте диалоговое окно » Свойства принтера » и закройте панель управления.
Дополнительная информация
Корпорация Майкрософт подтвердила, что эта проблема может возникать при использовании драйвера принтера PostScript, который входит в состав Windows, для печати задания PostScript на любом из указанных ниже принтеров.
Источник
Исправить ошибку pcl xl error при печати на принтере
Когда вы пытаетесь распечатать документ (pdf, word) на принтере kyocera или HP, то может выскочить сообщение об ошибке «pcl xl error» на листе бумаге. Ошибка PCL XL обычно происходит из-за повреждения драйвера принтера или из-за неправильной настройки печати при попытке распечатать документ. Для начало выполните простые действия:
- Перезагрузите компьютер и принтер, после чего попробуйте что-то напечатать.
- Выключите принтер и отсоедините его от компьютера. Немного подождите и снова подключите принтер.
- Проверьте наличие обновлений Windows.
1. Устранение неполадок
Откройте «Параметры» > «Обновление и безопасность» > «Устранение неполадок» > «Принтер».
2. Удалить драйвер принтера
Нажмите Win+R и введите devmgmt.msc, чтобы открыть диспетчер устройств. Старые драйвера принтера могут мешать работе основному. Нажмите сверху на вкладку «Вид» > «Показать скрытые устройства«. Далее найдите графу «Очереди печати«, раздвиньте её. Далее нажмите правой кнопкой мыши по принтеру и «Удалить устройство«. Удалите все принтера в списке. Перезагрузите ПК и далее система автоматически установит драйвер принтера.
Если драйвер не установился автоматически, то перейдите обратно в диспетчер устройств нажмите правой кнопкой мыши по графе «Очереди печати» и «Обновить конфигурацию оборудования«.
3. Изменить параметры печати
Одна из причин ошибки PCL XL в Windows 10 — неправильная настройка параметров принтера. Нажмите Win+R и введите control printers , чтобы открыть устройства и принтеры.
Нажмите правой кнопкой мыши и выберите «Настройка печати«. В новом окне нажмите снизу на «Дополнительно«.
Во вкладке «Advanced» найдите строку «TrueType Font» и выставьте в ней значение Download as Softfont. Найдите еще одну строку «Send True Type as Bitmap» и выставьте Enabled (Включено). Нажмите применить и OK, чтобы сохранить изменения.
Источник
HP laserjet p2015 (insuficient memory)
we have a number of these printers.
When we get a ticket saying they not working its usually because they are saying insufficient memory in the event logs.
Staff say they aren’t sending large files to printer.
we are using a pcl6 driver
could this be driver related.
What you need is a print management tool like Papercut to find out what they are sending.
It may only be a 1 page photo that’s screwing it, but if that photo is 5 squillion Gig in size, it’ll blow the printer memory!
It’s often uncompressed pictures in a Word or Powerpoint document that cause the problem.
Last edited 23rd January 2013 at 11:01 AM .
Yes i agree printer man would help, but is on the network man plan long term.
its never been seen to be needed.
What you need is a print management tool like Papercut to find out what they are sending.
It may only be a 1 page photo that’s screwing it, but if that photo is 5 squillion Gig in size, it’ll blow the printer memory!
Yes i agree printer man would help, but is on the network man plan long term.
its never been seen to be needed.
I think you’ve just found a reason. most of us get it to stop the ridiculous toner bills and this use is a helpful by-product! 
yeah. i know. i ran paper cut when i was admin ad last job. great -product.
Certainly worth while.
I seem to remember having a similar message about memory on a Laserjet and it turned out to be a misleading error, was actually down to it not detecting an IC on the compatible toner. Could be completely unrelated but thought it was worth mentioning.
the error about the IC on the toner is usually «supply memory fault» we get it occasionally with our xerox compatible carts. Printer out of memory tends to happen to us when people try and print PDF books, we find that choosing ‘print as image’ at 150dpi in the advanced printing dialogue fixes it, but we’ve seen it, as has already been suggested, when people try and print huge files. the last time was a 420mb illustrator document that entered the queue at 1.15gb.
We get this issue with the 2015 allot, we run PCounter and generically find its users sending huge files to the printers, even with PCounter it still to large for the printer to cope with. I find it usually pages of images in word which have been re-sized but left with the ridiculously high DPI. Unfortunately with-in a school there is no way to stop people doing this. I wouldn;y say its a fault with the driver as we have tried so many iterations of HP drivers you could go mad none seem to make it better.
i think the staff using these just educating a bit on images..
We were thinking to try this on them.
We had this and upgraded the memory on a number of the printers! this did not solve the issue, ended up asking pupils/staff to split the printing pages if the document was huge! HP were zero help also still have a ticket open with them.
in my experience the hp laserjets 2015 and 1320 series have got enough memory for most print jobs in offices (unless of course there are huge pictures involved). we had a lot of them in university offices and i got called in to fix them regularly. after our admin replaced about 5 of them (money wasn’t an issue. ) i looked into it and tried baking the formatter board. worked like a charm. i am still running the last one that was supposed to be in the trash by now. apparently hp was cheap with the solder agent. before buying new memory or printers i’d give this a try!
Источник
PostScript Printers Print «Insufficient Memory» Error Message
Symptoms
When you try to print a document on a PostScript printer, only a portion of the document may be printed. Also, the printer may print a page that indicates that the printer is out of memory. For example, the printer may print a page with the following text:
This job requires more memory than is available in this printer. Try on or more of the following and then print again:
For the output format choose Optimize for portability.
Reduce the number of fonts in this document.
Print the document in parts.
Cause
This issue may occur if the printer does not have enough memory to complete the PostScript print job. For example, if your document contains TrueType fonts that are downloaded as Type42 (outline) fonts, your printer may not have enough memory to perform the Type42 font download in native TrueType format. When the printer tries to allocate space for the font download, the printer overruns its memory.
Resolution
To resolve this issue, add more physical memory to the printer. For information about how to do so, view the documentation that was included with your printer.
Workaround
To work around this issue, reduce the complexity of your PostScript print job. For example, set the TrueType Font Download option to Automatic, Outline, or Bitmap as follows:
In Control Panel, open the Printers (or Printers and Faxes) folder.
Right-click your PostScript printer, and then click Properties.
Click Printing Preferences, click Layout, and then click Advanced.
Double-click PostScript Options, and then click TrueType Font Download Option.
In the True Type Font Download Option box, click Automatic. If Automatic is already selected, click Outline or Bitmap.
Close the Printer Properties dialog box, and then close Control Panel.
More Information
Microsoft has confirmed that this issue can occur when you use the PostScript printer driver that is included with Windows to print a PostScript job to any of the following printers:
Источник
HP Printer PCL XL Error Insufficient Memory
PrinterSupport365 | Printer | HP Printer PCL XL Error Insufficient Memory
Insufficient Memory PCL XL Error Code HP Printer
When a printer suddenly stops working at home or work it becomes a little stressful situation. As, we do not really have any gadget that can perform a job of a printer, hence, it becomes important to quickly resolve any printer issue without wasting any time.
Though, the frequency of error in a printer also depends on the brand, as HP printers are known for their quality and they hardly need any troubleshooting. But, in case your HP printer fails to perform or stops suddenly then you can always contact out HP printer tech support by dialing 1-800-828-6304. The technical helpline is available round the clock.
HP printer pcl xl error insufficient memory is one of the most talked about Errors Of HP Printers . If this error strikes then, when a user attempts to try print a doc on a PostScript printer, then just a section portion of doc can be printed. Plus, the printer can even print a page which shoes up that the HP printer is completely out of memory. For instance, the printer can print a page with some text like: This job needs more memory than what is available in the printer at present. In this case you will have to try out some of the common troubleshooting steps to print again:
For the output format select Optimize for portability.
Limit the quantity of fonts in the doc.
Print this particular doc in parts.
Causes Insufficient Memory Error Message HP Printer Machine
The major causes of this HP printer error include:
This problem generally happens when the printer is not left with enough memory to finish the PostScript print job successfully. For instance, if the doc includes TrueType fonts which are moved as Type42 fonts, then the printer will certainly not have enough memory to execute the Type42 font download, and that to in the native TrueType format. And, if the printer attempts to assign space for that specific font download, it plunders its memory.
Troubleshooting Steps HP Printer Error PCL XL Error Insufficient Memory
Here are the steps to resolve this issue:
One of the easiest ways to get rid of this HP printer error is adding on more physical memory to the HP printer that you are using. The document or the manual which was sent to you along with the printer has all sorts of these steps in details to help you easily add on the memory.
Some other troubleshooting steps:
You may try to limit the intricacy of the PostScript print job by changing the settings.
- To do so, get to the Control Panel and click on open the Printers folder.
- Now, Right-click on the PostScript printer, and after this select Properties.
- Choose the Printing Preferences, and hit the Layout button and select Advanced.
- Now, Double-click on the PostScript Options
- After this select the TrueType Font Download Option.
- Under the True Type Font Download Option you will find automatic, click on that. In case, the automatic is already chosen then select Outline or Bitmap.
- After this just close all the Printer Properties, and shut down Control Panel.
If the above mentioned steps do not resolve the issue then please call us on 1-800-828-6304, and out tech team will help with the issue.
HP Technical Support – Scope of Service
Our printer tech support people are the best to seek assistance from because:
- We are available around the clock
- You can contact us through emails ort chats
- We have years of experience in dealing printer related technical issues
Please call our Printer Tech Support Phone Number team by dialing 
to seek help.
Источник
When a printer suddenly stops working at home or work it becomes a little stressful situation. As, we do not really have any gadget that can perform a job of a printer, hence, it becomes important to quickly resolve any printer issue without wasting any time.
Though, the frequency of error in a printer also depends on the brand, as HP printers are known for their quality and they hardly need any troubleshooting. But, in case your HP printer fails to perform or stops suddenly then you can always contact out HP printer tech support by dialing 1-800-828-6304. The technical helpline is available round the clock.
HP printer pcl xl error insufficient memory is one of the most talked about Errors Of HP Printers . If this error strikes then, when a user attempts to try print a doc on a PostScript printer, then just a section portion of doc can be printed. Plus, the printer can even print a page which shoes up that the HP printer is completely out of memory. For instance, the printer can print a page with some text like: This job needs more memory than what is available in the printer at present. In this case you will have to try out some of the common troubleshooting steps to print again:
For the output format select Optimize for portability.
Limit the quantity of fonts in the doc.
Print this particular doc in parts.
Causes Insufficient Memory Error Message HP Printer Machine
The major causes of this HP printer error include:
This problem generally happens when the printer is not left with enough memory to finish the PostScript print job successfully. For instance, if the doc includes TrueType fonts which are moved as Type42 fonts, then the printer will certainly not have enough memory to execute the Type42 font download, and that to in the native TrueType format. And, if the printer attempts to assign space for that specific font download, it plunders its memory.
Troubleshooting Steps HP Printer Error PCL XL Error Insufficient Memory
Here are the steps to resolve this issue:
One of the easiest ways to get rid of this HP printer error is adding on more physical memory to the HP printer that you are using. The document or the manual which was sent to you along with the printer has all sorts of these steps in details to help you easily add on the memory.
Some other troubleshooting steps:
You may try to limit the intricacy of the PostScript print job by changing the settings.
- To do so, get to the Control Panel and click on open the Printers folder.
- Now, Right-click on the PostScript printer, and after this select Properties.
- Choose the Printing Preferences, and hit the Layout button and select Advanced.
- Now, Double-click on the PostScript Options
- After this select the TrueType Font Download Option.
- Under the True Type Font Download Option you will find automatic, click on that. In case, the automatic is already chosen then select Outline or Bitmap.
- After this just close all the Printer Properties, and shut down Control Panel.
If the above mentioned steps do not resolve the issue then please call us on 1-800-828-6304, and out tech team will help with the issue.
HP Technical Support – Scope of Service
Our printer tech support people are the best to seek assistance from because:
- We are available around the clock
- You can contact us through emails ort chats
- We have years of experience in dealing printer related technical issues
Please call our Printer Tech Support Phone Number team by dialing to seek help.
When a printer suddenly stops working at home or work it becomes a little stressful situation. As, we do not really have any gadget that can perform a job of a printer, hence, it becomes important to quickly resolve any printer issue without wasting any time.
Though, the frequency of error in a printer also depends on the brand, as HP printers are known for their quality and they hardly need any troubleshooting. But, in case your HP printer fails to perform or stops suddenly then you can always contact out HP printer tech support by dialing 1-800-828-6304. The technical helpline is available round the clock.
HP printer pcl xl error insufficient memory is one of the most talked about Errors Of HP Printers . If this error strikes then, when a user attempts to try print a doc on a PostScript printer, then just a section portion of doc can be printed. Plus, the printer can even print a page which shoes up that the HP printer is completely out of memory. For instance, the printer can print a page with some text like: This job needs more memory than what is available in the printer at present. In this case you will have to try out some of the common troubleshooting steps to print again:
For the output format select Optimize for portability.
Limit the quantity of fonts in the doc.
Print this particular doc in parts.
Causes Insufficient Memory Error Message HP Printer Machine
The major causes of this HP printer error include:
This problem generally happens when the printer is not left with enough memory to finish the PostScript print job successfully. For instance, if the doc includes TrueType fonts which are moved as Type42 fonts, then the printer will certainly not have enough memory to execute the Type42 font download, and that to in the native TrueType format. And, if the printer attempts to assign space for that specific font download, it plunders its memory.
Troubleshooting Steps HP Printer Error PCL XL Error Insufficient Memory
Here are the steps to resolve this issue:
One of the easiest ways to get rid of this HP printer error is adding on more physical memory to the HP printer that you are using. The document or the manual which was sent to you along with the printer has all sorts of these steps in details to help you easily add on the memory.
Some other troubleshooting steps:
You may try to limit the intricacy of the PostScript print job by changing the settings.
- To do so, get to the Control Panel and click on open the Printers folder.
- Now, Right-click on the PostScript printer, and after this select Properties.
- Choose the Printing Preferences, and hit the Layout button and select Advanced.
- Now, Double-click on the PostScript Options
- After this select the TrueType Font Download Option.
- Under the True Type Font Download Option you will find automatic, click on that. In case, the automatic is already chosen then select Outline or Bitmap.
- After this just close all the Printer Properties, and shut down Control Panel.
If the above mentioned steps do not resolve the issue then please call us on 1-800-828-6304, and out tech team will help with the issue.
HP Technical Support – Scope of Service
Our printer tech support people are the best to seek assistance from because:
- We are available around the clock
- You can contact us through emails ort chats
- We have years of experience in dealing printer related technical issues
Please call our Printer Tech Support Phone Number team by dialing to seek help.
To fix the HP printer error insufficient memory, follow the instructions provided in this article.
HP printer PCL XL error insufficient memory might be caused by an issue with the operating system especially when there is a recent update of Windows 10.
You can solve this error using the solutions below:
1. Change the TrueType Fonts Download Option
How to Change the TrueType Fonts Download Option
Follow the steps below to change the TrueType fonts download option:
Step 1: Press the keys for “Windows” and “R” on your keyboard to open the Run program.
Step 2: Type in “Control”, then click on “OK”.
Step 3: Click on “Hardware and Sound”.
Step 4: Click on “Devices and Printers”.
Step 5: Right-click on your printer.
Step 6: Select “Properties”.
Step 7: Click on “Printer Settings”.
Step 8: Click on “Page Setup”.
Step 9: Click on “Advanced”.
Step 10: Double-click on “PostScript Preferences”.
Step 11: Click on the button for “TrueType Font Download”.
Step 12: In the open window, click on the button labeled “Automatic”.
Step 13: If the “Automatic” option is selected, choose “Bitmap” or “Outline”.
Step 14: Save the changes you made.
Step 15: Close the dialog box of the Printer Properties.
Step 16: Close the computer’s Control Panel.
If the HP printer error memory is low message isn’t showing after the above, don’t continue troubleshooting. However, if the message is still displayed, try the next solution.
2. Restore your HP Printer to Default
How to Restore your HP Printer to Default
To restore your HP printer to default, follow the steps below:
Step 1: Drag the home screen of the printer’s control panel until you see the Setup menu.
Step 2: Click on the icon for “Setup”.
Step 3: Scroll down until you get to the menu for “Maintenance” and select it.
Step 4: Scroll down until you see “Restore Defaults” and select it.
Step 5: Press “OK”.
Step 6: Your HP printer will then be restored to its default factory settings and also restart.
Then on your computer, do the following…
Step 1: Go to “Printers and Scanners”.
Step 2: Click on “Add a printer or scanner”.
Step 3: Follow the instructions on the screen to finish the setup.
Step 4: Try to print a document.
If the HP printer error “not enough memory” message is cleared, don’t move to the solution below.
However, if the error persists, try the next solution.
HP printer PCL XL error insufficient memory might be caused by an issue with the operating system especially when there is a recent update of Windows 10.
You can solve this error using the solutions below:
1. Change the TrueType Fonts Download Option
How to Change the TrueType Fonts Download Option
Follow the steps below to change the TrueType fonts download option:
Step 1: Press the keys for “Windows” and “R” on your keyboard to open the Run program.
Step 2: Type in “Control”, then click on “OK”.
Step 3: Click on “Hardware and Sound”.
Step 4: Click on “Devices and Printers”.
Step 5: Right-click on your printer.
Step 6: Select “Properties”.
Step 7: Click on “Printer Settings”.
Step 8: Click on “Page Setup”.
Step 9: Click on “Advanced”.
Step 10: Double-click on “PostScript Preferences”.
Step 11: Click on the button for “TrueType Font Download”.
Step 12: In the open window, click on the button labeled “Automatic”.
Step 13: If the “Automatic” option is selected, choose “Bitmap” or “Outline”.
Step 14: Save the changes you made.
Step 15: Close the dialog box of the Printer Properties.
Step 16: Close the computer’s Control Panel.
If the HP printer error memory is low message isn’t showing after the above, don’t continue troubleshooting. However, if the message is still displayed, try the next solution.
2. Restore your HP Printer to Default
How to Restore your HP Printer to Default
To restore your HP printer to default, follow the steps below:
Step 1: Drag the home screen of the printer’s control panel until you see the Setup menu.
Step 2: Click on the icon for “Setup”.
Step 3: Scroll down until you get to the menu for “Maintenance” and select it.
Step 4: Scroll down until you see “Restore Defaults” and select it.
Step 5: Press “OK”.
Step 6: Your HP printer will then be restored to its default factory settings and also restart.
Then on your computer, do the following…
Step 1: Go to “Printers and Scanners”.
Step 2: Click on “Add a printer or scanner”.
Step 3: Follow the instructions on the screen to finish the setup.
Step 4: Try to print a document.
If the HP printer error “not enough memory” message is cleared, don’t move to the solution below.
However, if the error persists, try the next solution.
3. Change your HP Printer Driver – HP Printer Error Insufficient Memory
How to Change your HP Printer Driver
To change your HP printer driver, follow the steps below:
Step 1: Visit the HP website page for drivers and software.
Step 2: Download “PCL5/Universal printer driver for Windows”.
After the installation, check if the HP printer error “supply memory warning” message has been cleared. If it isn’t cleared, then try the next solution.
Are you seeing any other error message on your HP printer’s control panel, read this: HP Printer Errors and Solutions [Detailed] to learn how to resolve the error.
4. Uninstall and Reinstall your HP Printer Driver
How to Uninstall your HP Printer
To uninstall your HP printer, follow the steps below:
Step 1: Click on “Start”.
Step 2: Click on “Settings”.
Step 3: Click on “Devices”.
Step 4: Click on the tab for “Printers and Scanners”.
Step 5: Select your HP printer from the device list.
Step 6: Click on “Delete Device”.
How to Uninstall your HP Printer Software
To uninstall your HP printer software, follow the steps below:
Step 1: Click on “Start”.
Step 2: Click on “Settings”.
Step 3: Click on “Apps”.
Step 4: Type your printer name in the search field.
Step 5: Click on your HP printer software.
Step 6: Click on “Uninstall”. If you are asked to confirm, click “Yes”.
How to Remove the Driver from the Print Server Properties
To remove your HP printer driver from the print server properties, follow the steps below:
Step 1: Click on “Start”.
Step 2: Click on “Settings”.
Step 3: Click on “Devices”.
Step 4: Scroll to and select “Related Settings”.
Step 5: Click “Print Server Properties”.
Step 6: Click on the tab labeled “Drivers”.
Step 7: Click on the HP printer that you intend to remove.
Step 8: Click on “Remove”.
Step 9: In the dialog box that appears, click on “Delete driver and driver package”.
Step 10: Click on “OK”.
Step 11: Click on “Delete” to confirm your choice.
How to Install the Printer and the Driver
To install your HP printer and its driver, follow the steps below:
Step 1: Go to the HP website and download your HP printer driver’s latest version.
Step 2: Install the driver and add your printer to your computer.
Check if the HP printer memory error on supply is no longer displayed. If it is still displayed, then you will have to service your printer.
Prices pulled from the Amazon Product Advertising API on:
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Обновлено Июнь 2023: перестаньте получать сообщения об ошибках и замедлите работу вашей системы с помощью нашего инструмента оптимизации. Получить сейчас в эту ссылку
- Скачайте и установите инструмент для ремонта здесь.
- Пусть он просканирует ваш компьютер.
- Затем инструмент почини свой компьютер.
Решение проблем с принтером в Windows может быть детской забавой, особенно когда распространенные ошибки не требуют от пользователей выполнения сложных действий для их устранения. Даже если вы попытались распечатать документ на принтере PostScript и получили сообщение об ошибке «Недостаточно памяти», есть решения для решения проблемы.
Prices pulled from the Amazon Product Advertising API on:
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
