Проявления проблемы:
На телефоне или планшете после обновления Android не запускается навигация Igo Nextgen или Igo Primo.
Ошибки, которые появляются:
- Отсутствует или неполная директория
- global_cfg not found
- Вставьте SD карту с IGO
Суть проблемы:
После обновления программного обеспечения, Андроид отзывает разрешения у приложения навигации, и программа igo перестает запускаться и выдает ошибку.
Решения:
Вариант 1. Телефон или планшет Xiaomi
Вариант 2. Телефон или планшет Samsung
Вариант 3. Навигация iGo Primo и ошибка «Вставьте SD карту с IGO»
Если эти варианты не помогли нажмите сюда.
1. Отсутствует или неполная директория, global_cfg not found
При запуске приложения появляются следующие ошибки:
1. На экране устройства удерживаем иконку приложения
2. В появившемся меню нажать на «О приложении» с буквой i
3. В появившемся меню «О приложении» выбираем «Разрешения приложения»
4. Пролистываем вниз и ищем где написано: «Доступ запрещен» и меняем везде на «Разрешить»
После этого приложение будет работать.
2. Самый часто встречающийся вариант на планшетах и телефонах от Samsung
Этот вариант аналогичный выше описанному, отличие лишь во внешнем виде иконок и меню. При открытии приложения видно следующие ошибки:
1. Удерживаем иконку приложения навигации до появления меню и нажимаем на букву i в кружке
2. В открывшемся меню «Информация о приложении» нажимаем на раздел «Разрешения»
3. В открывшемся меню мотаем вниз до раздела «Запрещено» и разрешаем все пункты
Приложение будет работать.
3. При запуске Igo Primo появляется ошибка «Вставьте SD карту с IGO»
Ошибка которая появляется:
1. Удерживаем иконку приложения и в появившемся меню выбираем «Информация о приложении»
2. Листаем вниз до раздела «Разрешения» и нажимаем на него
3. Разрешаем все пункты
Если эти варианты не помогли
Бывают случаи, когда вы все разрешили, все установили правильно, но приложение все равно не работает. Скорее всего, у вас заглючил Андроид. В этом случае проще сбросить планшет и телефон до заводских настроек и заново настроить навигацию.
Заключение
Исходя свыше описанного, приходим к выводу, что не важно, какой фирмы планшет и какая стоит версия Android и как называется пункт меню или раздел суть действий одинакова, необходимо дать приложению разрешения.
As we know, IGO maps have IGO8, IGO primo and igo my way version. Some friends let us know that they get terminal error message “global_config not found” when starting navigation software.
The error message comes up on the device. The navigation does not start at all as the file in question has been deleted or damaged.
You need check as below steps;
- you need check if you put these files into corrected folder. Usually, you need put all files in the root of internal storage if windows ce 6.0 (wince 6.0) system; you should put all files in the in the root of internal storage in folder named iGO or IGO_Basar If android system.
- Then, please find the “content” folder on your device or SD card, and copy the downloaded zipped file inside the “global_cfg” folder.
Please note that in order to restore functionality the zipped file (It should not be unzipped), and the old one should be overwritten. - Should you receive the “Global_cfg not found” error message after an update please try restoring a backup via last backup(from our files or your hands) and then download the update one more time. After that please check if the error message still pops up.
In case the error is still there, please check your device or SD card for any errors using ScanDisk. To do this, please connect your device or SD card to your computer and troubleshoot by clicking:
Start – My Computer – Right click on the SD card or device flash memory – Properties – Tools – Check Now – check ‘Automatically fix file system errors’ – Start
Login
- Forum
- GPS Navigation Systems Sections
- iGO GPS System
- iGO Primo Nextgen Help&Support
- ANDROID global_cfg not found
-
30th December 2019, 01:19 AM
#1
Member
- Rep Power
- 0
global_cfg not found
Hi,
I have just installed a new head unit in my Rav4. A Dasaita HA5298B-V940 Android 9 screen 1024*600 PX5 cpu. Igo Pal iGO719WD
When I first installed the unit I assumed that the sd card connected via usb as a GPS card was supplied with a usb adapter.
On powering up I got the global_cfg not found error. I had the same error while driving in my other vehicle with a Dasaita head unit as well but different model running Igo israel iGO687WD_IL. I ended up fixing that on the fly by changing the global_gfg to .xxx, restarting , then changing back and it started up fine.
I tried this on the Rav4 and after I realized that there must be a hidden GPS sd card somewhere, changed the global_gfg and that worked.
Today when trying to upgrade the maps with the file manager loading the maps from a USB, I got the global_cfg error again and now can’t seem to get it to work.
Firstly, why does this happen on a system that was previously working fine, and secondly is there a procedure that will always fix this?
Hope someone can help.Thanks
Baz
-
30th December 2019, 10:09 AM
#2
There could be few reasons.
First, in your post sometimes you name it global_cfg and sometimes global_gfg. Maybe name is wrong.
Try to do all file operations with Total Commander instead of your default file browser, which in many cases do not allow to change file extension while renaming and you end up with wrong file name.
Total Commander will notify if any operation is not done successfully, but default file browsers in many cases are not giving any feedback if operation does not end correctly.
Before copying new global_cfg from USB, delete old one, or rename old one and delete it later (after copying new).
And most important: before any file operation force stop app in Android settings, because when file is used by app it can not be deleted, replaced or modified.BTW, you could have put all your problems in this one post.
No need for separated question about map colors which could be solved by copying all missing files in scheme folder.NO THANKS POSTS ALLOWED, NO LIKES NEEDED, ALL MIRRORS APPRECIATED
Please read: >[Only registered and activated users can see links. ]<, >[Only registered and activated users can see links. ]< and >[Only registered and activated users can see links. ]<
Password for all my uploads (if needed): gpspower.net
-
30th December 2019, 12:11 PM
#3
Member
- Rep Power
- 0
Thanks for the reply,
I did manage to get the GPS going again by renaming the global_cfg folder and file and after some mucking around it came good. I managed to change maps as well.
I did some work today on my other vehicle and I did nothing to the gps, but it came up with the global_cfg not found error as well. Only thing that seemed to work was removing the sd card and starting the program then re-inserting it and the Nextgen started up fine.
I was not sure if asking multiple unrelated questions in the same thread was a good idea. I will do that in the future. I will try Total commander as well as the standard one is not that great.
I appreciate the help.
-
30th December 2019, 03:24 PM
#4
One note: it is not recommended to use iGO or other software from a USB device. It’s totally the other thing with computers where the (portable) USB software is completely loaded into memory and works actually from there.
There are protocol-related problems with transfers (usb — SERIAL). This applies to most applications that are used from external storage devices.
This is why SD cards are mostly used.Before asking a question, know it’s already discussed here and at 99.9% is not unique. Use search.
NO ONE IS A SEER, READ (click on): [Only registered and activated users can see links. ] <- Click!
[Only registered and activated users can see links. ] <- Click!
-
30th December 2019, 04:40 PM
#5
NO THANKS POSTS ALLOWED, NO LIKES NEEDED, ALL MIRRORS APPRECIATED
Please read: >[Only registered and activated users can see links. ]<, >[Only registered and activated users can see links. ]< and >[Only registered and activated users can see links. ]<
Password for all my uploads (if needed): gpspower.net
-
31st December 2019, 08:32 AM
#6
Member
- Rep Power
- 0
merged, spoiler, coding…
I was using my usb to transfer files to the (hidden) sd card. I have always used usb for media playing and that seems to work OK. thanks for the explanation of why SD cards are still used with navigation.
It has happened again while trying to fix the voice problem when on a phone call and I cannot for the life of me get it to work again now.
Is it a good idea to re-install by clicking the iGO719WD.apk on the sd card?
I am desperate.Sorry to be the main one replying to my own thread, but I finally got it all going again. I tried everything, cleared cache, re-installed, formatted cards, tried different configurations of the cards. all no good and hours gone.
I finally un-installed the apk and re-installed it and it worked. I then made copies of the card for future use and also copied new maps, schemes, and sys.txt over to the working card.A combination of adding
and
Code:
Please Login or Register to see the links
to the sys.txt , and I now have no interruptions during phone calls from voice guidance.
Thanks for all the help and I hope this helps some others as it drove me crazy.
Cheers
Baz
Advertissements
Tags for this Thread
Bookmarks
Bookmarks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
- BB code is On
- Smilies are On
- [IMG] code is On
- [VIDEO] code is On
- HTML code is Off
Forum Rules
Powered by vBulletin
Copyright © 2023 vBulletin Solutions, Inc. All rights reserved.
Copyright � 2008-2017 GPS Power . All rights reserved
All times are GMT +1. The time now is 11:40 PM.
-
k.a.s.
Наш человек- Регистрация:
- 19 дек 2016
- Сообщения:
- 377
- Симпатии:
- 1.024
- Баллы:
- 100
- Адрес:
- Санкт-Петербург
- Имя:
- Алексей
- Авто:
- KIA Soul 3, бывший владелец Kaptur Style CVT
Логически — самая очевидная причина и скорее всего все так и есть, однако, когда я, например, копировал в устройство новые карты, то проводник матерился под конец, в итоге после удаления ненужных голосовых файлов кое-как все утрамбовал, но под завязку, ничего не матерится пока и все работает.
Есть предположение, что при первой установке репака нужно больше свободного места для инициализации нового «лицензионного» ПО.
-
Blek
Наш человек- Регистрация:
- 14 янв 2017
- Сообщения:
- 174
- Симпатии:
- 331
- Баллы:
- 70
- Адрес:
- Нахабино
- Имя:
- Алексей
- Авто:
- Рено Каптур 4Х4 АКПП
Дак самое что интересно, что все влезло и никаких ошибок не выскакивало, все сделал строго по инструкции, а после перезапуска на тебе…
-
Старший научный сотрудник
Наш человек
Член клуба RKCR- Регистрация:
- 1 окт 2016
- Сообщения:
- 4.440
- Симпатии:
- 11.049
- Баллы:
- 120
- Адрес:
- Пермь
- Имя:
- Денис
- Авто:
- Стайл 4х4 МКПП оранжевый бегемот
Там же в последней строке пишет
Кэш. 0
Для работы места нет -
Blek
Наш человек- Регистрация:
- 14 янв 2017
- Сообщения:
- 174
- Симпатии:
- 331
- Баллы:
- 70
- Адрес:
- Нахабино
- Имя:
- Алексей
- Авто:
- Рено Каптур 4Х4 АКПП
Вот я и спрашиваю, что можно почистить что бы шарманка заработала, но Илья пока молчит.
-
Старший научный сотрудник
Наш человек
Член клуба RKCR- Регистрация:
- 1 окт 2016
- Сообщения:
- 4.440
- Симпатии:
- 11.049
- Баллы:
- 120
- Адрес:
- Пермь
- Имя:
- Денис
- Авто:
- Стайл 4х4 МКПП оранжевый бегемот
В папке войс можно убрать все кроме русского
Даст 150 мегабайт где-то
Наум и Blek нравится это.
-
Старший научный сотрудник
Наш человек
Член клуба RKCR- Регистрация:
- 1 окт 2016
- Сообщения:
- 4.440
- Симпатии:
- 11.049
- Баллы:
- 120
- Адрес:
- Пермь
- Имя:
- Денис
- Авто:
- Стайл 4х4 МКПП оранжевый бегемот
Карты ненужных стран убрать
Наум и Blek нравится это.
-
drueed
Наш человек- Регистрация:
- 14 дек 2016
- Сообщения:
- 987
- Симпатии:
- 1.452
- Баллы:
- 100
- Адрес:
- Щёлково
- Имя:
- Илья
- Авто:
- Kaptur, Style, 2.0, AT, рыжий в черной кепке
Ну как что — не нужные лично вам карты, голоса, лицензии и т.п.
Лично для себя оставил только Россию, а весь остальной мусор пока не разгребал времени нет -
Blek
Наш человек- Регистрация:
- 14 янв 2017
- Сообщения:
- 174
- Симпатии:
- 331
- Баллы:
- 70
- Адрес:
- Нахабино
- Имя:
- Алексей
- Авто:
- Рено Каптур 4Х4 АКПП
-
Blek
Наш человек- Регистрация:
- 14 янв 2017
- Сообщения:
- 174
- Симпатии:
- 331
- Баллы:
- 70
- Адрес:
- Нахабино
- Имя:
- Алексей
- Авто:
- Рено Каптур 4Х4 АКПП
Лишние карты убрал, лицензии тоже, однако при перезапуске выдал ошибку global cfg not found, зашел в папку и правда его там нет, скиньте кто нибудь со своего медиа нав это файлик пожалуйста, вставлю его обратно в папку. Видимо когда первый раз система зависла этот файл и слетел.
-
Старший научный сотрудник
Наш человек
Член клуба RKCR- Регистрация:
- 1 окт 2016
- Сообщения:
- 4.440
- Симпатии:
- 11.049
- Баллы:
- 120
- Адрес:
- Пермь
- Имя:
- Денис
- Авто:
- Стайл 4х4 МКПП оранжевый бегемот
А копия родной парнем NNG есть?
Они ( файлы эти, и их несколько) там живут
Здравствуйте. Пришло сообщение у меня что пришло новое обновление ПО моего Media/Nav до 4,1,0
Полный размер
Полный размер
. Обновил все хорошо потом программа попросило обновить и навигацию (Карту)
Полный размер
Полный размер
ну я пошел домой добавил на флешку и пошел к машине. Делал не в первый раз поэтому знал что и как делать но…не тут было.вот здесь
Полный размер
Пришлось скидывать клеммы и выдал потом вот такое сообщение на MediaNav
Полный размер
Потом сама навигация и карты не работают (не активная кнопка «Я согласен«).
Ребята что произошло и как исправить программный сбой?
P.S. Прошивка и карты официальные не ломанные.
Полный размер
Цена вопроса: 0 ₽
Пробег: 43 130 км