Перейти к контенту
Электронный холодильный контроллер ERC111 со светодиодным дисплеем, специально разработанный для охладителей бутылок, коммерческих холодильников и морозильников. Он особенно подходит для ОЕМ клиентов, так как время, простая и надежная установка и высокое качество важны наряду с гибкостью. Дисплей может быть красным или синим. Контроллер доступен с верхней левой кнопкой «Оттайка». Нижняя левая кнопка «Отключение».
Документация
Контроллер может настраиваться тремя способами: используя «Программу», при помощи док-станции или вручную посредством кнопок на фронтальной панели. «Программа», лицензированная Данфосс, предлагает простую настройку параметров посредством USB шлюза. Программа поставляется отдельно; для получения технической литературы и дополнительной информации контактируйте с местным представительством Данфосс.
Док-станция поставляется отдельно. Для получения технической литературы и дополнительной информации контактируйте с местным представительством Данфосс.
| Входы | 3 входа: 2 аналоговых (цифровые), 1 цифровой; назначение определяется пользователем | ||
| Воздух / испаритель / конденсатор | |||
| Выходы | UL60730 | EN60730 | |
| «DO1» (Реле компрессора) | 120 В перем. ток: 16 A резистивная/FLA16/LRA72 240 В перем. ток: 10 A резистивная/FLA10/LRA60 |
16(16) A | |
| Датчики | Danfoss NTC и ЭКО аксессуары | ||
| Разъемы | Модульная система разъёмов для ОЕМ-клиентов с опциональным адаптером с винтовыми клеммами. Тип входного разъёма: Rast 2.5 Edge. Тип выходного разъёма: Rast 5 Standard |
||
| Программирование | Программирование с помощью док-станции ERC от Данфосс | ||
| Сборка | 3 типа: фронтальный монтаж; клипсы; полностью интегрированное решение (требуется определённый ОЕМ-дизайн монтажного отверстия) | ||
| Дисплей | Светодиодный, 3-х цифровой, десятичная точка и многофункциональные иконки; шкала ˚С/˚F | ||
| Клавиатура | 4 кнопки (IP65), 2 слева, 2 справа; программируемые пользователем | ||
| Рабочие условия | от 0˚С до 55˚С, относительная влажность 93% | ||
| Условия хранения | от -40˚С до 85˚С, относительная влажность 93% | ||
| Диапазон измерения | от -40˚С до 85˚С | ||
| Защита | Передняя панель: IP65, задняя часть: защита от воды и пыли в соответствии с IP31, доступность на задней панели разъёмов вводит ограничение IP00 | ||
| Окружающая среда | Степень загрязнения II, без конденсации | ||
| Огнестойкость и пожарозащищённость | Категория D (UL94-V0) | ||
| Категория ЭМС | Категория I | ||
| Рабочие циклы | Реле компрессора: более чем 175 000 при полной нагрузке (16А(16А)) | ||
| Сертификация | R290/R600a: заключение о соответствии EN/IEC 60335- 2-24, приложение СС и EN/IEC 60335-2-89, приложение BB Жаропрочный провод в соответствии с EN/IEC 60335- 1 I EC/EN 60730 UL60730 NSF CQC EAC |
Эти сертификаты имеют силу только при использовании разрешенных аксессуаров |
-
Contents
-
Table of Contents
-
Troubleshooting
-
Bookmarks
Quick Links
User Guide
Electronic Refrigeration Controller
ERC 112
This user guide is intended to be used by OEMs for the purpose of
programming ERC 112. It may also be useful for technicians. However, it is not
intended as a user guide for end users.
www.danfoss.com/erc
Related Manuals for Danfoss ERC 112
Summary of Contents for Danfoss ERC 112
- Page 1
Electronic Refrigeration Controller ERC 112 This user guide is intended to be used by OEMs for the purpose of programming ERC 112. It may also be useful for technicians. However, it is not intended as a user guide for end users. www.danfoss.com/erc… - Page 2
User Guide | ERC 112 Refrigeration Controller Introduction Temperature control for refrigeration appliances. Application Front panel mounting. The latest generation CPU, plenty of memory Advantages and high-end electronic components allow for a uniquely versatile software. Three separate password-protected user levels can be used to control more than 300 different parameters to fit all individual requirements. -
Page 3: Typical Application
User Guide | ERC 112 Refrigeration Controller Typical application Glass Door Merchandiser No-frost freezer/sub-zero cooler S3, S4 are optional S2, S3, S4 are optional Gastro No-frost freezer/Cooler S3, S4 are optional S2, S3, S4 are optional © Danfoss | DCS (vt) | 2019.07…
-
Page 4: Product Overview
User Guide | ERC 112 Refrigeration Controller Product overview Display The ERC 112 is an electronic refrigeration controller with an LED display especially developed for bottle coolers and commercial fridges and freezers. It is particularly suited for OEM customers where time, easy and reliable installation and high quality need to go hand in hand with flexibility.
-
Page 5: Quick Programming
User Guide | ERC 112 Refrigeration Controller Quick programming Software for PC KoolProg Software from Danfoss for programming the ERC-controller via a PC rather than with the front panel buttons. https://www.danfoss.com/en/service-and- support/downloads/dcs/koolprog/ USB gateway USB gateway The USB Gateway is a laboratory tool, offering fast and easy programming of any ERC controller connected directly to the PC.
-
Page 6: Technical Specs
FLA2/LRA12, TV-1 8 A resistive, 2(2) A Max 10 A total «DO4-6» Danfoss NTC sensors and Danfoss ECO accessories (Light, Motion and Door sensors) Probes Danfoss Pt 1000 ohm/0°C Modular connector system for OEM customers, with optional output screw terminal adapter;…
- Page 7
User Guide | ERC 112 Refrigeration Controller Connections ERC 112C (3 relays) (Inputs and outputs are configurable) ERC 112D (4 relays) Note S4 Port can also be used to connect other sensors and Door sensor. © Danfoss | DCS (vt) | 2019.07… -
Page 8: Code Numbers
User Guide | ERC 112 Refrigeration Controller Code numbers Type I-Pack Type I-Pack Qty. Code no. Qty. Code no. ERC 112C, Red LED, without 080G3202 -100 – 200 °C, Pt 1000 buzzer S4, 1000 mm, 3-pole 080G3350 ERC 112D, Red LED, without…
-
Page 9: Manual Operation With Buttons (Direct Access)
User Guide | ERC 112 Refrigeration Controller Operation The controller can be configured in four ways: All these tools are supplied separately. Programming Tools Using: For technical literature and further information, • KoolProg and KoolKey as Gateway please contact your local Danfoss representative.
-
Page 10: Fan Settings
Min. -100.0°C In standard operation the set point is changed by simply pressing the Max. 200.0°C «temperature up/down» buttons on ERC 112; for laboratory and Default 2.0°C assembly line you may opt for software controlled set point adjustment (speed improvement) «SPr»…
- Page 11
User Guide | ERC 112 Refrigeration Controller «FSt» Fan Minimum Stop time Minimum stop time for fan protection. Min. 0 s Max. 960 s Default 10 s «FdC» Fan Δt cut in (This parameter is only applicable with Automatic fan control «Aut» mode.) Min. - Page 12
User Guide | ERC 112 Refrigeration Controller «Pdi» Pull Down Defrost Interval This is the time between defrost cycles during pull down. It is measured in hours and can be up to 48 hours. Min. 0 hour During pull down, this setting overrides the defrost interval and defrost time settings (see the defrost section). - Page 13
User Guide | ERC 112 Refrigeration Controller «dot» Drip OFF Time This parameter can be set to between 0 and 60 minutes and defines how long the delay is between the heater being switched Min. 0 min OFF and the compressor starting again. -
Page 14: Compressor Settings
User Guide | ERC 112 Refrigeration Controller Compressor settings «uPt» Voltage protection «no»: no voltage protection. «yES»: voltage protection activated based on voltage related settings. Min. no Max. yes Default no «uLi» Minimum cut-in voltage/uLi. Minimum cut-out voltage/uLo. Maximum voltage/uHi Min.
- Page 15
The controller can have its display intensity (brightness) set in one of Min. 2 two ways: Max. 10 A) With a Danfoss ambient light sensor attached, the brightness of the Default 10 display is adjusted automatically according to the ambient light level (see the assignments section). -
Page 16: Display Unit
User Guide | ERC 112 Refrigeration Controller «CFu» Display Unit This parameter sets the display to Fahrenheit or Celsius. Switching from Min. °C one to the other will cause all temperature settings to be automatically Max. °F updated accordingly. Default °C «trS»…
- Page 17
User Guide | ERC 112 Refrigeration Controller «SdF» Show Defrost If set to «yES», this parameter causes the display to show DEF when the Min. no system is in defrost mode. If set to «nO», the temperature continues to Max. yes be displayed. - Page 18
User Guide | ERC 112 Refrigeration Controller «Pdd» Pull down delay Normally, it is not necessary or desirable to sound an alarm during a pull Min. 0 min down (the initial phase of reaching the desired temperature). This Max. 960 min Default 240 min parameter prevents the high temperature alarm «HAt»… - Page 19
Default 2.0 K ECO strategy NOTE: some of these parameters require the installation of the Danfoss Ambient Light Sensor. The Danfoss USB Gateway in combination with «KoolProg Software» allows for real time measurement of the current light intensity. Danfoss recommends test- ing and adjusting «SLd»… - Page 20
User Guide | ERC 112 Refrigeration Controller «Euu» EWU active on/OFF Enable or disable early wake up. Min. no Max. yes Default yes «CLH» Shop close hour Shop is assumed to be closed when staying in ECO mode longer than shop close hour. - Page 21
Please contact your local Danfoss representative for information about default settings. NOTE: coded sensors will impact on the number of possible configurations. For instance: Danfoss supplies only 2-pole defrost sensors, so input «S3» will most likely be used as a defrost/evaporator temperature sensor input. «S1C» S1 Config/S1C… - Page 22
User Guide | ERC 112 Refrigeration Controller «diC» DI Config This is the digital input used for a digital sensor or bus communications. Default non «non»: not used. «doC»: door contact, contact closed when door closed. «doo»: door contact, contact open when door closed. - Page 23
You may not therefore have access to change all the passwords. Passwords are entered by using the up and down arrow buttons. Min. 0 Max. 999 Danfoss advises against using passwords which are easy to remember Default 0 or enter, for example 111, 222, 123 etc. «PS3″… - Page 24
User Guide | ERC 112 Refrigeration Controller «HAr» HW version Danfoss hardware version number. «onL» OrderNoLow Danfoss order code number. «onH» OrderNoHigh Danfoss order code number. «oEL» OEM code Low «oEn» OEM code Middle «oEH» OEM code High «PAr» Parameter version OEM parameter version number [requires EKA copy key update]. -
Page 25: Troubleshooting
User Guide | ERC 112 Refrigeration Controller Troubleshooting Problem Probable cause Remedy Compressor does not start Waiting for compressor delay timer Check CoP->CSt Defrost in progress Check CoP ->Pot /Pod Line voltage to compressor too low Check dEF ->dit, dot or too high Check CoP->uLi, uLo, uHi…
-
Page 26: Typical Applications
User Guide | ERC 112 Refrigeration Controller Typical applications Glass Door Merchandiser, No-frost freezer/sub-zero cooler Note: this is a typical (default) wiring diagram since both inputs (AI/DI’s) and outputs (DO’s) can be assigned differently. Please see «ASi», assignment ERC 112D…
- Page 27
User Guide | ERC 112 Refrigeration Controller Gastro No-frost freezer ERC 112D Controller Red LED with buzzer 080G3213 Red LED with buzzer 080G3217 Temperature Sensor for Temperature Sensor for Temperature Sensor for Cabinet Temperature Evaporator Temperature Condenser Temperature Door input… -
Page 28: Application Matrix
User Guide | ERC 112 Refrigeration Controller Application Matrix ERC 112 Output Input Application ERC type Standard beverage Condenser or Ambient Door or Motion ERC 112C Comp Lamp Control Defrost cooler Light or Motion detection detection Sub-zero beverage Condenser or Ambient…
-
Page 29: Sensor Placement
User Guide | ERC 112 Refrigeration Controller Sensor placement Control sensor The control sensor must always be connected and is used for controlling the cut-in and cut-out of the compressor according to the set point. The sensor is also used for the displayed temperature.
-
Page 30: Condenser Sensor
User Guide | ERC 112 Refrigeration Controller Condenser sensor The condenser sensor is used to protect the compressor against high pressure when the condenser is blocked or the condenser fan fails. Condenser sensor Place the sensor at the liquid side of the condenser.
- Page 31
User Guide | ERC 112 Refrigeration Controller © Danfoss | DCS (vt) | 2019.07 BC200686422115en-000802 | 31… - Page 32
© Danfoss | DCS (vt) | 2019.07 BC200686422115en-000802 | 32…
-
Contents
-
Table of Contents
-
Troubleshooting
-
Bookmarks
Quick Links
User Guide
Electronic Refrigeration Controller
ERC 112
This user guide is intended to be used by OEMs for the purpose of
programming ERC 112. It may also be useful for technicians. However, it is not
intended as a user guide for end users.
www.danfoss.com/erc
Related Manuals for Danfoss ERC 112
Summary of Contents for Danfoss ERC 112
- Page 1
Electronic Refrigeration Controller ERC 112 This user guide is intended to be used by OEMs for the purpose of programming ERC 112. It may also be useful for technicians. However, it is not intended as a user guide for end users. www.danfoss.com/erc… - Page 2
User Guide | ERC 112 Refrigeration Controller Introduction Temperature control for refrigeration appliances. Application Front panel mounting. The latest generation CPU, plenty of memory Advantages and high-end electronic components allow for a uniquely versatile software. Three separate password-protected user levels can be used to control more than 300 different parameters to fit all individual requirements. -
Page 3: Typical Application
User Guide | ERC 112 Refrigeration Controller Typical application Glass Door Merchandiser No-frost freezer/sub-zero cooler S3, S4 are optional S2, S3, S4 are optional Gastro No-frost freezer/Cooler S3, S4 are optional S2, S3, S4 are optional © Danfoss | DCS (vt) | 2019.07…
-
Page 4: Product Overview
User Guide | ERC 112 Refrigeration Controller Product overview Display The ERC 112 is an electronic refrigeration controller with an LED display especially developed for bottle coolers and commercial fridges and freezers. It is particularly suited for OEM customers where time, easy and reliable installation and high quality need to go hand in hand with flexibility.
-
Page 5: Quick Programming
User Guide | ERC 112 Refrigeration Controller Quick programming Software for PC KoolProg Software from Danfoss for programming the ERC-controller via a PC rather than with the front panel buttons. https://www.danfoss.com/en/service-and- support/downloads/dcs/koolprog/ USB gateway USB gateway The USB Gateway is a laboratory tool, offering fast and easy programming of any ERC controller connected directly to the PC.
-
Page 6: Technical Specs
FLA2/LRA12, TV-1 8 A resistive, 2(2) A Max 10 A total «DO4-6» Danfoss NTC sensors and Danfoss ECO accessories (Light, Motion and Door sensors) Probes Danfoss Pt 1000 ohm/0°C Modular connector system for OEM customers, with optional output screw terminal adapter;…
- Page 7
User Guide | ERC 112 Refrigeration Controller Connections ERC 112C (3 relays) (Inputs and outputs are configurable) ERC 112D (4 relays) Note S4 Port can also be used to connect other sensors and Door sensor. © Danfoss | DCS (vt) | 2019.07… -
Page 8: Code Numbers
User Guide | ERC 112 Refrigeration Controller Code numbers Type I-Pack Type I-Pack Qty. Code no. Qty. Code no. ERC 112C, Red LED, without 080G3202 -100 – 200 °C, Pt 1000 buzzer S4, 1000 mm, 3-pole 080G3350 ERC 112D, Red LED, without…
-
Page 9: Manual Operation With Buttons (Direct Access)
User Guide | ERC 112 Refrigeration Controller Operation The controller can be configured in four ways: All these tools are supplied separately. Programming Tools Using: For technical literature and further information, • KoolProg and KoolKey as Gateway please contact your local Danfoss representative.
-
Page 10: Fan Settings
Min. -100.0°C In standard operation the set point is changed by simply pressing the Max. 200.0°C «temperature up/down» buttons on ERC 112; for laboratory and Default 2.0°C assembly line you may opt for software controlled set point adjustment (speed improvement) «SPr»…
- Page 11
User Guide | ERC 112 Refrigeration Controller «FSt» Fan Minimum Stop time Minimum stop time for fan protection. Min. 0 s Max. 960 s Default 10 s «FdC» Fan Δt cut in (This parameter is only applicable with Automatic fan control «Aut» mode.) Min. - Page 12
User Guide | ERC 112 Refrigeration Controller «Pdi» Pull Down Defrost Interval This is the time between defrost cycles during pull down. It is measured in hours and can be up to 48 hours. Min. 0 hour During pull down, this setting overrides the defrost interval and defrost time settings (see the defrost section). - Page 13
User Guide | ERC 112 Refrigeration Controller «dot» Drip OFF Time This parameter can be set to between 0 and 60 minutes and defines how long the delay is between the heater being switched Min. 0 min OFF and the compressor starting again. -
Page 14: Compressor Settings
User Guide | ERC 112 Refrigeration Controller Compressor settings «uPt» Voltage protection «no»: no voltage protection. «yES»: voltage protection activated based on voltage related settings. Min. no Max. yes Default no «uLi» Minimum cut-in voltage/uLi. Minimum cut-out voltage/uLo. Maximum voltage/uHi Min.
- Page 15
The controller can have its display intensity (brightness) set in one of Min. 2 two ways: Max. 10 A) With a Danfoss ambient light sensor attached, the brightness of the Default 10 display is adjusted automatically according to the ambient light level (see the assignments section). -
Page 16: Display Unit
User Guide | ERC 112 Refrigeration Controller «CFu» Display Unit This parameter sets the display to Fahrenheit or Celsius. Switching from Min. °C one to the other will cause all temperature settings to be automatically Max. °F updated accordingly. Default °C «trS»…
- Page 17
User Guide | ERC 112 Refrigeration Controller «SdF» Show Defrost If set to «yES», this parameter causes the display to show DEF when the Min. no system is in defrost mode. If set to «nO», the temperature continues to Max. yes be displayed. - Page 18
User Guide | ERC 112 Refrigeration Controller «Pdd» Pull down delay Normally, it is not necessary or desirable to sound an alarm during a pull Min. 0 min down (the initial phase of reaching the desired temperature). This Max. 960 min Default 240 min parameter prevents the high temperature alarm «HAt»… - Page 19
Default 2.0 K ECO strategy NOTE: some of these parameters require the installation of the Danfoss Ambient Light Sensor. The Danfoss USB Gateway in combination with «KoolProg Software» allows for real time measurement of the current light intensity. Danfoss recommends test- ing and adjusting «SLd»… - Page 20
User Guide | ERC 112 Refrigeration Controller «Euu» EWU active on/OFF Enable or disable early wake up. Min. no Max. yes Default yes «CLH» Shop close hour Shop is assumed to be closed when staying in ECO mode longer than shop close hour. - Page 21
Please contact your local Danfoss representative for information about default settings. NOTE: coded sensors will impact on the number of possible configurations. For instance: Danfoss supplies only 2-pole defrost sensors, so input «S3» will most likely be used as a defrost/evaporator temperature sensor input. «S1C» S1 Config/S1C… - Page 22
User Guide | ERC 112 Refrigeration Controller «diC» DI Config This is the digital input used for a digital sensor or bus communications. Default non «non»: not used. «doC»: door contact, contact closed when door closed. «doo»: door contact, contact open when door closed. - Page 23
You may not therefore have access to change all the passwords. Passwords are entered by using the up and down arrow buttons. Min. 0 Max. 999 Danfoss advises against using passwords which are easy to remember Default 0 or enter, for example 111, 222, 123 etc. «PS3″… - Page 24
User Guide | ERC 112 Refrigeration Controller «HAr» HW version Danfoss hardware version number. «onL» OrderNoLow Danfoss order code number. «onH» OrderNoHigh Danfoss order code number. «oEL» OEM code Low «oEn» OEM code Middle «oEH» OEM code High «PAr» Parameter version OEM parameter version number [requires EKA copy key update]. -
Page 25: Troubleshooting
User Guide | ERC 112 Refrigeration Controller Troubleshooting Problem Probable cause Remedy Compressor does not start Waiting for compressor delay timer Check CoP->CSt Defrost in progress Check CoP ->Pot /Pod Line voltage to compressor too low Check dEF ->dit, dot or too high Check CoP->uLi, uLo, uHi…
-
Page 26: Typical Applications
User Guide | ERC 112 Refrigeration Controller Typical applications Glass Door Merchandiser, No-frost freezer/sub-zero cooler Note: this is a typical (default) wiring diagram since both inputs (AI/DI’s) and outputs (DO’s) can be assigned differently. Please see «ASi», assignment ERC 112D…
- Page 27
User Guide | ERC 112 Refrigeration Controller Gastro No-frost freezer ERC 112D Controller Red LED with buzzer 080G3213 Red LED with buzzer 080G3217 Temperature Sensor for Temperature Sensor for Temperature Sensor for Cabinet Temperature Evaporator Temperature Condenser Temperature Door input… -
Page 28: Application Matrix
User Guide | ERC 112 Refrigeration Controller Application Matrix ERC 112 Output Input Application ERC type Standard beverage Condenser or Ambient Door or Motion ERC 112C Comp Lamp Control Defrost cooler Light or Motion detection detection Sub-zero beverage Condenser or Ambient…
-
Page 29: Sensor Placement
User Guide | ERC 112 Refrigeration Controller Sensor placement Control sensor The control sensor must always be connected and is used for controlling the cut-in and cut-out of the compressor according to the set point. The sensor is also used for the displayed temperature.
-
Page 30: Condenser Sensor
User Guide | ERC 112 Refrigeration Controller Condenser sensor The condenser sensor is used to protect the compressor against high pressure when the condenser is blocked or the condenser fan fails. Condenser sensor Place the sensor at the liquid side of the condenser.
- Page 31
User Guide | ERC 112 Refrigeration Controller © Danfoss | DCS (vt) | 2019.07 BC200686422115en-000802 | 31… - Page 32
© Danfoss | DCS (vt) | 2019.07 BC200686422115en-000802 | 32…
| Название | Инструкция | Комментарий | |
|---|---|---|---|
|
|
Danfoss AK-RC 101 | Danfoss_AK-RC_101 | AK-RC 101 OPTYMA TM Control Single-phase |
|
|
Danfoss EKC 101 | Danfoss EKC 101 | ЕКС 101 — для контроля температуры и операций размораживания в помещении путем управления подачей хладагента или включения/выключения компрессора в холодильной установке |
|
|
Danfoss EKC 102 | Danfoss EKC 102 |
EKC 102A с одним релейным выходом и одним температурным датчиком
EKC 102B с двумя релейными выходами, дополнительным температурным датчиком и цифровым входом EKC 102C с двумя релейными выходами, дополнительным температурным датчиком и цифровым входом EKC 102D с тремя релейными выходами, двумя датчиками температуры и цифровым входом |
|
|
Danfoss EKC 101 201 301 | Danfoss EKC 101 201 301 |
ЕКС 101 — регулирование температуры в режимах нагрева или охлаждения
ЕКС 201 и 301 — управление температурой, управления компрессором, управления вентилятором, управления режимом оттаивания, аварийной сигнализации |
|
|
Danfoss EKC 201 dt | Danfoss EKC 201 dt | EKC 201 dt контроллер содержит регулятор температуры с двойной функцией термостата, реле не будет работать, пока оба термостата не дадут сигнал на охлаждение |
|
|
Danfoss EKC 202C-MS | Danfoss EKC 202C-MS | EKC 202C-MS — контроллер с четырьмя релейными выходами, двумя температурными датчиками и цифровым входом. Регулирование температуры осуществляется посредством включения/отключения компрессора или соленоидного вентиля. Датчик оттайки. Электрическая оттайка. Управление вентилятором. Реле 4 может использоваться как аварийное или для управления светом. |
|
|
Danfoss EKC 202 D | Danfoss EKC 202 D | EKC 202 D — управляет температурой в охлаждаемом объеме, получая сигнал от одного температурного датчика. Датчик помещается в поток воздуха после испарителя или непосредственно перед испарителем. Новое включение после оттайки может быть выполнено по времени или температуре. Температура испарителя может быть измерена напрямую датчиком оттайки. Выходные реле включают и выключают требуемые функции: охлаждение (компрессор или соленоидный вентиль), оттайка, вентилятор, аварийная сигнализация, освещение. Контроллер, при необходимости, может быть снабжён съемным модулем |
|
|
Danfoss EKC 204A | Danfoss EKC 204A | EKC 204A — регулирует температуру, руководствуясь сигналом от одного или двух температурных датчиков. Четыре реле: управляют охлаждением (компрессор или соленоид), управляют вентилятором, управляют оттайкой, управляют аварийной сигнализацией, управляют освещением, управляют вентилями для оттайки газом, управляют охлаждением (2-й компрессор или 2-й соленоид) |
|
|
Danfoss ERC 211, 213, 214 | Danfoss ERC 211, 213, 214 |
ERC 211 имеет один релейный выход и два входа (1 аналоговый, 1 аналоговый/цифровой). Этот контроллер может быть использован в системах охлаждения или нагрева. ERC 213 имеет три релейных выхода и четыре входа (2 аналоговых, 1 аналоговый/цифровой, 1 цифровой). ERC 214 имеет четыре релейных выхода и четыре входа (2 аналоговых, 1 аналоговый/цифровой, 1 цифровой). |
|
|
Danfoss AK-CC 210 | Danfoss AK-CC 210 | AK CC 201 — для регулирования температуры в охлаждаемом объеме и управления режимом оттайки |
|
|
Danfoss AK-PC 351 | Danfoss AK-PC 351 | AK-PC 351 — для регулирования холодопроизводительности компрессоров и конденсаторов в небольших холодильных системах (max: 4 компрессора и одного конденсатора), предусмотрена передача данных с использованием сети Modbus (сетевая карта встроена в контроллер), а так же подключен к блокам мониторинга типа AK-SM 800 и AK-SC 355 |
|
|
Danfoss AK-CC 525A | Danfoss AK-CC 525A | AK-CC 525A — комплексное управление холодильным оборудованием. Дневной/ночной термостат с двухпозиционным (Вкл/Выкл) или модуляционным регулированием. Переключение между настройками термостата посредством цифрового входа. Адаптивный контроль перегрева. Начало оттаивания по графику, цифровому входу или сети передачи данных. Естественное или электрическое оттаивание. Конец оттаивания по времени или температуре. Координированное оттаивание на нескольких контроллерах. Пульсирующая работа вентиляторов при остановке охлаждения. Функции двери. Управление освещением. Заводская настройка, обеспечивающая повышенную точность измерения температуры по сравнению требованиями, приведенными в стандарте EN 13485 (с датчиком Pt 1000 Ом). Встроенная плата передачи данных MODBUS с возможностью подключения сетевой карты LonWorks |
|
|
Danfoss AK-CC 550 | Danfoss AK-CC 550 | AK-CC 550 — управление торговым холодильным оборудованием и холодильными камерами всех типов. Преимущество данного контроллера: быстрая настройка с использованием предварительно заданных параметров, встроенная плата передачи данных, встроенные часы с автономным питанием. |
|
|
Danfoss AK-PC 551 | Danfoss AK-PC 551 | Контроллер AK-PC 551 используется для регулирования холодопроизводительности компрессоров и конденсаторов в холодильных системах. Может регулироваться работа максимум 8 компрессоров и одного конденсатора. В контроллере предусмотрена передача данных с помощью сети Modbus. Контроллер может быть подключен к блоку управления системой управления процессом охлаждения ADAP-KOOL® AK-SС 355, АК-SM 800 |
|
|
Danfoss AK-CC 750 | Danfoss AK-CC 750 | AK-CC 750 является комплексным управляющим устройствам, который вместе с вентилями и датчиками составляет систему управления испарителями холодильного оборудования и камер коммерческих холодильных установок. AK-CC 750 — заменяет традиционную механическую автоматику и содержат термостаты дневного и ночного режимов работы, функцию оттаивания, управления вентилятором, кантовым подогревом, аварийной сигнализацией, управления освещением. Контроллер снабжен системой передачи данных и управляется посредством ПК. |
|
|
Danfoss EKC 315A | Danfoss EKC 315A | EKC 315A — точное регулирование перегрева и температуры охлаждения |
|
|
Danfoss EKC 331T | Danfoss EKC 331T | ЕКС 331Т — для регулирования производительности компрессоров и конденсаторов в небольших системах охлаждения, сигнал с датчика давления преобразуется контроллером в температурное значение |
|
|
Danfoss EKC 347 | Danfoss EKC 347 | EKC 347 — используется для регулирования уровня хладагента в циркуляционных ресиверах, отделителях жидкости, промежуточных охладителях, экономайзерах, конденсаторах и ресиверах. Датчик, (AKS 4100/4100U), непрерывно измеряет уровень жидкого хладагента в баке. Контроллер получает сигнал и соответствующим образом управляет клапаном для поддержания заданного уровня жидкого хладагента |
|
|
Danfoss EKC 361 | Danfoss EKC 361 | EKC 361 — точное регулирование температуры (в холодильной камере, в холодильной системе, в чиллере). Точностью поддержания температуры ± 0.5 °С. Температура испарителя поддерживается на максимально возможном высоком уровне, так что влажность воздуха остаётся высокой и снижаются потери продуктов |
|
|
Danfoss EKC 367 | Danfoss EKC 367 | ЕКС 367 — для высокого требования к охлаждению неупакованных пищевых продуктов (витринах, мясных холодильных камерах, овощных холодильных камерах, холодильных камерах для цветов, установках кондиционирования воздуха), используется с вентилем KVQ |
|
|
Danfoss EKC 368 | Danfoss EKC 368 | ЕКС 368 — в системе регулирования используется вентиль KVS, производительность которого определяется производительностью установки |
|
|
Danfoss EKC 414A | Danfoss EKC 414A | EKC 414 A — контроллер для витрин/холодильных камер простой, но эффективный контроллер, предназначенный главным образом для торгового холодильного оборудования. Лёгок в управлении. Обеспечивает сохранность продукта в оптимальных условиях. Контроллер уменьшает усушку и обеспечивает сохранность товара |
|
|
Danfoss EKC 414A1 | Danfoss EKC 414A1 | EKC 414A1 — для управления холодильной установкой с одним испарителем оснащенной импульсным расширительным клапаном типа AKV. Релейные выходы для управления: компрессором, вентилятором, оттайкой, функцией аварийной сигнализации, освещением |
|
|
Danfoss AKC 25H | Danfoss AKC 25H | АКС 25H — регулирование производительности компрессоров и конденсаторов в холодильных системах различного типа, может быть использован в сочетании с другими контроллерами системы Danfoss ADAP-KOOL* |
|
|
Danfoss m2 | Danfoss m2 | Система мониторинга m2 разработана с целью создания комплексного и простого в обращении средства контроля и регистрации температур и других параметров системы охлаждения |
|
|
Контроллер Danfoss ERC101 | Контроллер Danfoss ERC101 | Контроллер ERC111 со светодиодным дисплеем, специально разработанный для охладителей бутылок, коммерческих холодильников и морозильников. Дисплей может быть красным или синим. Контроллер доступен с верхней левой кнопкой «Оттайка». Нижняя левая кнопка «Отключение». |
|
|
Danfoss Optyma Plus Inverter | Danfoss Optyma Plus Inverter_EN | |
|
|
Контроллер производительности Ридан Р-КП 301 | Ридан Р-КП 301 | Контроллер Ридан Р-КП 301 используется для регулирования холодопроизводительности компрессоров и конденсаторов в холодильных системах. |
Quick Start Guide
ERC 213
Overview
The ERC 213 is designed to be an easy, universal replacement control. We encourage users to employ one of five predefined applications that meet the
needs of most systems. If users need to modify specific parameters, it should be done after installing the predefined application that most closely meets
system needs.
For more information, including detailed instructions, error codes, parameters, and more,
visit www.danfoss.com/erc or download the Koolcode app from iTunes or Google Play.
For a video guide of the quick set-up, visit http://bit.ly/ERC213 or use the QR code located to the right.
Quick Set-up
STEP
Action
STEP 1 Wire control, to include power and sensors
Power up control
STEP 2
Energize control
Enter Quick Configuration Menu and Select app
Press «<» for more than three seconds within one minute of power up to enter Quick Configuration Menu. o61 appears on screen
STEP 3
Press «set» while o61 is on screen
Select appropriate app using App Selection section below by pressing » » or » «, then press «set».
Select Sensor
Press «set» while o06 is on screen
STEP 4
If using included sensor, leave default value «n10». If using another sensor, select using Sensor Resistance
section on opposing page or cycle through steps 2 – 4 changing the sensor type until the temperature reading
on the main screen is accurate. As above, cycle between options by pressing » » or » » and press «set» to save.
Set Temperature
STEP 5
From main screen, quickly press «set» (1 second).
Cycle to intended temperature by pressing » » or » » and press «set» to save.
App Selection
Select application based on application and wiring configuration (i.e., refrigeration vs. freezing, and number of temperature sensors). The Typical Wiring
Configurations diagram on the reverse side of this document may be used to assist with selection. All parameters can be modified using the full menu.
Some parameters have min and max set points which may need to be changed for less common configurations.
Control
Application
Application
Code
AP0 (Default)
No preset application — full menu
AP1
Refrigeration
AP2
Refrigeration
AP3
Freezing
AP4
Refrigeration
AP5
Freezing
AP6
No preset application — simplified menu
* Hot gas defrost is an option available in full menu (d01).
Key Functions and Display Icons
Key Functions
Press and hold at power up:
FACTORY RESET («FAC» is
displayed)
Press for one second: BACK
Press and hold: PULL-DOWN
Display Icons
Night mode (Energy saving)
Compressor running (Flashes
in pull-down mode)
Defrost
© Danfoss | DCS (ADAP-KOOL®) | 2018-11
Defrost
Defrost
Sensors
Type*
Termination
2
Natural
Time
1
Electric
Time
1
Electric
Time
1
Electric
Temp.
2
Electric
Temp.
2
2
Press for one second: UP
Press and hold: ON / OFF
Press for one second: DOWN
Press and hold: DEFROST
Press for one second: TEMP. SETPOINT / OK
Press and hold: MENU
SET
Fan running
Active alarm
°C
Unit (°C or °F)
Temp. Range
Default
min. / max.
Default Dif.
Temp. [°F]
[°F]
[°F] [r01]
[r00]
[r02/r03]
36
-31 / 22
39
36 / 43
36
32 / 39
-11
-15 / -4
36
32 / 39
-11
-15 / -4
36
-31 – 122
Connection Diagram
DO1
3L
1
2
~
~
~
Power supply
(according to the product code number)
– Sair Control sensor
– S5 Defrost (evaporator) sensor
– SC Condenser sensor
– DI1 Digital input – configurable to the functions listed under
menu code o02
– DI2 Digital input – configurable to the functions listed under
menu code o37
Screen Display
Control turns on, goes through start up,
then shows the current temperature reading
AP0 flashes on screen
o06 appears on screen
n10 flashes on screen
o06 appears on screen, then control resets
Current temp. setting appears on screen
Screen returns to main screen
Defrost
Max.
Interval
Defrost
[hrs]
Time [mins]
[d03]
[d04]
4
6
30
4
4
30
4
6
15
4
6
15
4
6
30
4
6
30
4
6
30
Programming key – EKA 183B (080G9741)
GND
TX
RX
+5V
DO2
DO3
15
16
17
18
GND
GND
4N
9
10
11
12
13
5
6
7
8
~
Sair
S5
Sc/DI1
DKRCE.PD.RL0.A3.02 | 1
Defrost
Termination
Temp. [°F]
[d02]
43
–
–
–
43
43
43
14
DI2
Quick Start Guide
ERC 213
Overview
The ERC 213 is designed to be an easy, universal replacement control. We encourage users to employ one of five predefined applications that meet the
needs of most systems. If users need to modify specific parameters, it should be done after installing the predefined application that most closely meets
system needs.
For more information, including detailed instructions, error codes, parameters, and more,
visit www.danfoss.com/erc or download the Koolcode app from iTunes or Google Play.
For a video guide of the quick set-up, visit http://bit.ly/ERC213 or use the QR code located to the right.
Quick Set-up
STEP
Action
STEP 1 Wire control, to include power and sensors
Power up control
STEP 2
Energize control
Enter Quick Configuration Menu and Select app
Press «<» for more than three seconds within one minute of power up to enter Quick Configuration Menu. o61 appears on screen
STEP 3
Press «set» while o61 is on screen
Select appropriate app using App Selection section below by pressing » » or » «, then press «set».
Select Sensor
Press «set» while o06 is on screen
STEP 4
If using included sensor, leave default value «n10». If using another sensor, select using Sensor Resistance
section on opposing page or cycle through steps 2 – 4 changing the sensor type until the temperature reading
on the main screen is accurate. As above, cycle between options by pressing » » or » » and press «set» to save.
Set Temperature
STEP 5
From main screen, quickly press «set» (1 second).
Cycle to intended temperature by pressing » » or » » and press «set» to save.
App Selection
Select application based on application and wiring configuration (i.e., refrigeration vs. freezing, and number of temperature sensors). The Typical Wiring
Configurations diagram on the reverse side of this document may be used to assist with selection. All parameters can be modified using the full menu.
Some parameters have min and max set points which may need to be changed for less common configurations.
Control
Application
Application
Code
AP0 (Default)
No preset application — full menu
AP1
Refrigeration
AP2
Refrigeration
AP3
Freezing
AP4
Refrigeration
AP5
Freezing
AP6
No preset application — simplified menu
* Hot gas defrost is an option available in full menu (d01).
Key Functions and Display Icons
Key Functions
Press and hold at power up:
FACTORY RESET («FAC» is
displayed)
Press for one second: BACK
Press and hold: PULL-DOWN
Display Icons
Night mode (Energy saving)
Compressor running (Flashes
in pull-down mode)
Defrost
© Danfoss | DCS (ADAP-KOOL®) | 2018-11
Defrost
Defrost
Sensors
Type*
Termination
2
Natural
Time
1
Electric
Time
1
Electric
Time
1
Electric
Temp.
2
Electric
Temp.
2
2
Press for one second: UP
Press and hold: ON / OFF
Press for one second: DOWN
Press and hold: DEFROST
Press for one second: TEMP. SETPOINT / OK
Press and hold: MENU
SET
Fan running
Active alarm
°C
Unit (°C or °F)
Temp. Range
Default
min. / max.
Default Dif.
Temp. [°F]
[°F]
[°F] [r01]
[r00]
[r02/r03]
36
-31 / 22
39
36 / 43
36
32 / 39
-11
-15 / -4
36
32 / 39
-11
-15 / -4
36
-31 – 122
Connection Diagram
DO1
3L
1
2
~
~
~
Power supply
(according to the product code number)
– Sair Control sensor
– S5 Defrost (evaporator) sensor
– SC Condenser sensor
– DI1 Digital input – configurable to the functions listed under
menu code o02
– DI2 Digital input – configurable to the functions listed under
menu code o37
Screen Display
Control turns on, goes through start up,
then shows the current temperature reading
AP0 flashes on screen
o06 appears on screen
n10 flashes on screen
o06 appears on screen, then control resets
Current temp. setting appears on screen
Screen returns to main screen
Defrost
Max.
Interval
Defrost
[hrs]
Time [mins]
[d03]
[d04]
4
6
30
4
4
30
4
6
15
4
6
15
4
6
30
4
6
30
4
6
30
Programming key – EKA 183B (080G9741)
GND
TX
RX
+5V
DO2
DO3
15
16
17
18
GND
GND
4N
9
10
11
12
13
5
6
7
8
~
Sair
S5
Sc/DI1
DKRCE.PD.RL0.A3.02 | 1
Defrost
Termination
Temp. [°F]
[d02]
43
–
–
–
43
43
43
14
DI2
-
Contents
-
Table of Contents
-
Troubleshooting
-
Bookmarks
Quick Links
User Guide
Electronic Refrigeration Controller
ERC 112
This user guide is intended to be used by OEMs for the purpose of
programming ERC 112. It may also be useful for technicians. However, it is not
intended as a user guide for end users.
www.danfoss.com/erc
Related Manuals for Danfoss ERC 112
Summary of Contents for Danfoss ERC 112
-
Page 1
Electronic Refrigeration Controller ERC 112 This user guide is intended to be used by OEMs for the purpose of programming ERC 112. It may also be useful for technicians. However, it is not intended as a user guide for end users. www.danfoss.com/erc… -
Page 2
User Guide | ERC 112 Refrigeration Controller Introduction Temperature control for refrigeration appliances. Application Front panel mounting. The latest generation CPU, plenty of memory Advantages and high-end electronic components allow for a uniquely versatile software. Three separate password-protected user levels can be used to control more than 300 different parameters to fit all individual requirements. -
Page 3: Typical Application
User Guide | ERC 112 Refrigeration Controller Typical application Glass Door Merchandiser No-frost freezer/sub-zero cooler S3, S4 are optional S2, S3, S4 are optional Gastro No-frost freezer/Cooler S3, S4 are optional S2, S3, S4 are optional © Danfoss | DCS (vt) | 2019.07…
-
Page 4: Product Overview
User Guide | ERC 112 Refrigeration Controller Product overview Display The ERC 112 is an electronic refrigeration controller with an LED display especially developed for bottle coolers and commercial fridges and freezers. It is particularly suited for OEM customers where time, easy and reliable installation and high quality need to go hand in hand with flexibility.
-
Page 5: Quick Programming
User Guide | ERC 112 Refrigeration Controller Quick programming Software for PC KoolProg Software from Danfoss for programming the ERC-controller via a PC rather than with the front panel buttons. https://www.danfoss.com/en/service-and- support/downloads/dcs/koolprog/ USB gateway USB gateway The USB Gateway is a laboratory tool, offering fast and easy programming of any ERC controller connected directly to the PC.
-
Page 6: Technical Specs
FLA2/LRA12, TV-1 8 A resistive, 2(2) A Max 10 A total «DO4-6» Danfoss NTC sensors and Danfoss ECO accessories (Light, Motion and Door sensors) Probes Danfoss Pt 1000 ohm/0°C Modular connector system for OEM customers, with optional output screw terminal adapter;…
-
Page 7
User Guide | ERC 112 Refrigeration Controller Connections ERC 112C (3 relays) (Inputs and outputs are configurable) ERC 112D (4 relays) Note S4 Port can also be used to connect other sensors and Door sensor. © Danfoss | DCS (vt) | 2019.07… -
Page 8: Code Numbers
User Guide | ERC 112 Refrigeration Controller Code numbers Type I-Pack Type I-Pack Qty. Code no. Qty. Code no. ERC 112C, Red LED, without 080G3202 -100 – 200 °C, Pt 1000 buzzer S4, 1000 mm, 3-pole 080G3350 ERC 112D, Red LED, without…
-
Page 9: Manual Operation With Buttons (Direct Access)
User Guide | ERC 112 Refrigeration Controller Operation The controller can be configured in four ways: All these tools are supplied separately. Programming Tools Using: For technical literature and further information, • KoolProg and KoolKey as Gateway please contact your local Danfoss representative.
-
Page 10: Fan Settings
Min. -100.0°C In standard operation the set point is changed by simply pressing the Max. 200.0°C «temperature up/down» buttons on ERC 112; for laboratory and Default 2.0°C assembly line you may opt for software controlled set point adjustment (speed improvement) «SPr»…
-
Page 11
User Guide | ERC 112 Refrigeration Controller «FSt» Fan Minimum Stop time Minimum stop time for fan protection. Min. 0 s Max. 960 s Default 10 s «FdC» Fan Δt cut in (This parameter is only applicable with Automatic fan control «Aut» mode.) Min. -
Page 12
User Guide | ERC 112 Refrigeration Controller «Pdi» Pull Down Defrost Interval This is the time between defrost cycles during pull down. It is measured in hours and can be up to 48 hours. Min. 0 hour During pull down, this setting overrides the defrost interval and defrost time settings (see the defrost section). -
Page 13
User Guide | ERC 112 Refrigeration Controller «dot» Drip OFF Time This parameter can be set to between 0 and 60 minutes and defines how long the delay is between the heater being switched Min. 0 min OFF and the compressor starting again. -
Page 14: Compressor Settings
User Guide | ERC 112 Refrigeration Controller Compressor settings «uPt» Voltage protection «no»: no voltage protection. «yES»: voltage protection activated based on voltage related settings. Min. no Max. yes Default no «uLi» Minimum cut-in voltage/uLi. Minimum cut-out voltage/uLo. Maximum voltage/uHi Min.
-
Page 15
The controller can have its display intensity (brightness) set in one of Min. 2 two ways: Max. 10 A) With a Danfoss ambient light sensor attached, the brightness of the Default 10 display is adjusted automatically according to the ambient light level (see the assignments section). -
Page 16: Display Unit
User Guide | ERC 112 Refrigeration Controller «CFu» Display Unit This parameter sets the display to Fahrenheit or Celsius. Switching from Min. °C one to the other will cause all temperature settings to be automatically Max. °F updated accordingly. Default °C «trS»…
-
Page 17
User Guide | ERC 112 Refrigeration Controller «SdF» Show Defrost If set to «yES», this parameter causes the display to show DEF when the Min. no system is in defrost mode. If set to «nO», the temperature continues to Max. yes be displayed. -
Page 18
User Guide | ERC 112 Refrigeration Controller «Pdd» Pull down delay Normally, it is not necessary or desirable to sound an alarm during a pull Min. 0 min down (the initial phase of reaching the desired temperature). This Max. 960 min Default 240 min parameter prevents the high temperature alarm «HAt»… -
Page 19
Default 2.0 K ECO strategy NOTE: some of these parameters require the installation of the Danfoss Ambient Light Sensor. The Danfoss USB Gateway in combination with «KoolProg Software» allows for real time measurement of the current light intensity. Danfoss recommends test- ing and adjusting «SLd»… -
Page 20
User Guide | ERC 112 Refrigeration Controller «Euu» EWU active on/OFF Enable or disable early wake up. Min. no Max. yes Default yes «CLH» Shop close hour Shop is assumed to be closed when staying in ECO mode longer than shop close hour. -
Page 21
Please contact your local Danfoss representative for information about default settings. NOTE: coded sensors will impact on the number of possible configurations. For instance: Danfoss supplies only 2-pole defrost sensors, so input «S3» will most likely be used as a defrost/evaporator temperature sensor input. «S1C» S1 Config/S1C… -
Page 22
User Guide | ERC 112 Refrigeration Controller «diC» DI Config This is the digital input used for a digital sensor or bus communications. Default non «non»: not used. «doC»: door contact, contact closed when door closed. «doo»: door contact, contact open when door closed. -
Page 23
You may not therefore have access to change all the passwords. Passwords are entered by using the up and down arrow buttons. Min. 0 Max. 999 Danfoss advises against using passwords which are easy to remember Default 0 or enter, for example 111, 222, 123 etc. «PS3″… -
Page 24
User Guide | ERC 112 Refrigeration Controller «HAr» HW version Danfoss hardware version number. «onL» OrderNoLow Danfoss order code number. «onH» OrderNoHigh Danfoss order code number. «oEL» OEM code Low «oEn» OEM code Middle «oEH» OEM code High «PAr» Parameter version OEM parameter version number [requires EKA copy key update]. -
Page 25: Troubleshooting
User Guide | ERC 112 Refrigeration Controller Troubleshooting Problem Probable cause Remedy Compressor does not start Waiting for compressor delay timer Check CoP->CSt Defrost in progress Check CoP ->Pot /Pod Line voltage to compressor too low Check dEF ->dit, dot or too high Check CoP->uLi, uLo, uHi…
-
Page 26: Typical Applications
User Guide | ERC 112 Refrigeration Controller Typical applications Glass Door Merchandiser, No-frost freezer/sub-zero cooler Note: this is a typical (default) wiring diagram since both inputs (AI/DI’s) and outputs (DO’s) can be assigned differently. Please see «ASi», assignment ERC 112D…
-
Page 27
User Guide | ERC 112 Refrigeration Controller Gastro No-frost freezer ERC 112D Controller Red LED with buzzer 080G3213 Red LED with buzzer 080G3217 Temperature Sensor for Temperature Sensor for Temperature Sensor for Cabinet Temperature Evaporator Temperature Condenser Temperature Door input… -
Page 28: Application Matrix
User Guide | ERC 112 Refrigeration Controller Application Matrix ERC 112 Output Input Application ERC type Standard beverage Condenser or Ambient Door or Motion ERC 112C Comp Lamp Control Defrost cooler Light or Motion detection detection Sub-zero beverage Condenser or Ambient…
-
Page 29: Sensor Placement
User Guide | ERC 112 Refrigeration Controller Sensor placement Control sensor The control sensor must always be connected and is used for controlling the cut-in and cut-out of the compressor according to the set point. The sensor is also used for the displayed temperature.
-
Page 30: Condenser Sensor
User Guide | ERC 112 Refrigeration Controller Condenser sensor The condenser sensor is used to protect the compressor against high pressure when the condenser is blocked or the condenser fan fails. Condenser sensor Place the sensor at the liquid side of the condenser.
-
Page 31
User Guide | ERC 112 Refrigeration Controller © Danfoss | DCS (vt) | 2019.07 BC200686422115en-000802 | 31… -
Page 32
© Danfoss | DCS (vt) | 2019.07 BC200686422115en-000802 | 32…