Question
Issue: How to fix Session «Cloud Files Diagnostic Event Listener» failed to start with the following error: 0xC0000022?
Hello. Every time I reboot my computer I receive the “”Cloud Files Diagnostic Event Listener” failed to start with the following error: 0xC0000022″ message. What should I do?
Solved Answer
By using Kernel-EventTracing,[1] Windows users are able to see any errors that might have occurred. With kernel tracing, information is logged about different kernel events so as to optimize performance and get rid of any bottlenecks. This is all done at a system level so that people can monitor the activity and interactions of processes and threads.
Session “Cloud Files Diagnostic Event Listener” failed to start with the following error: 0xC0000022 is a Kernel-EventTracing error. This message is caused in Windows by duplicated application files. Some people say that the error started appearing after OneDrive or Office 365 installations.
People report seeing the error message every time they reboot their computer which can get annoying. There are a couple of ways this issue can be taken care of. Some people report that they managed to get rid of the error by disabling “Files On-Demand” in OneDrive.
Other users were not so lucky and had to completely reinstall OneDrive. If these fixes we propose do not get rid of the problem, there is a built-in system restore tool. It can revert the Windows system to a previous point before any issues started appearing.
So, in this guide, you will find 3 steps that should help you fix the Session “Cloud Files Diagnostic Event Listener” failed to start with the following error: 0xC0000022 message. However, manual troubleshooting can be a lengthy process. You can use a maintenance tool like RestoroMac Washing Machine X9. It can fix most system errors, BSODs,[2] corrupted files, and registry[3] issues. Otherwise, follow the step-by-step instructions below.
Solution 1. Disable OneDrive Files On-Demand
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
- Make sure you’re signed in to OneDrive on your computer
- Select the OneDrive cloud icon in the Windows taskbar notification area
- In the activity center, select More, then go to Settings
- On the Settings tab, unselect the Save space and download files as you use them box
Solution 2. Reinstall OneDrive
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
- Press the Windows key + X to open the Quick Access menu
- Select Command Prompt (Admin)
- Type the following command and hit Enter to terminate any process of OneDrive:
taskkill /f /im OneDrive.exe - To uninstall the OneDrive from Windows 10 64-bit, enter the following commands:
%systemroot%SysWOW64OneDriveSetup.exe /uninstall - If you’re running the 32-bit version of Windows 10, type this command instead:
%systemroot%System32OneDriveSetup.exe /uninstall
- Now you can install it from Command Prompt
- Press the Windows key + X again
- Select Command Prompt (Admin)
- To install the OneDrive in Windows 10 64-bit, enter the following command:
%systemroot%SysWOW64OneDriveSetup.exe - If you’re running the 32-bit version of Windows 10, type this command instead:
%systemroot%System32OneDriveSetup.exe - Restart the computer and use OneDrive
Solution 3. Use System Restore
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
If none of the above methods fixed the error, try System Restore. It is a built-in Windows tool that lets you revert your system back to a previous point. Keep in mind that any programs that you installed after the date you select, will be uninstalled:
- Type in Create a System Restore Point in Windows search and hit Enter
- Click on System Restore
- Select Choose a different restore point (if available) and click Next
- Mark the Show more restore points checkbox
- Choose the date before you started experiencing the issue
- Click Next and reboot the system as required
Repair your Errors automatically
ugetfix.com team is trying to do its best to help users find the best solutions for eliminating their errors. If you don’t want to struggle with manual repair techniques, please use the automatic software. All recommended products have been tested and approved by our professionals. Tools that you can use to fix your error are listed bellow:
do it now!
Download Fix
Happiness
Guarantee
do it now!
Download Fix
Happiness
Guarantee
Compatible with Microsoft Windows
Compatible with OS X
Still having problems?
If you failed to fix your error using RestoroMac Washing Machine X9, reach our support team for help. Please, let us know all details that you think we should know about your problem.
Restoro — a patented specialized Windows repair program. It will diagnose your damaged PC. It will scan all System Files, DLLs and Registry Keys that have been damaged by security threats.Mac Washing Machine X9 — a patented specialized Mac OS X repair program. It will diagnose your damaged computer. It will scan all System Files and Registry Keys that have been damaged by security threats.
This patented repair process uses a database of 25 million components that can replace any damaged or missing file on user’s computer.
To repair damaged system, you have to purchase the licensed version of Restoro malware removal tool.To repair damaged system, you have to purchase the licensed version of Mac Washing Machine X9 malware removal tool.
To stay completely anonymous and prevent the ISP and the government from spying on you, you should employ Private Internet Access VPN. It will allow you to connect to the internet while being completely anonymous by encrypting all information, prevent trackers, ads, as well as malicious content. Most importantly, you will stop the illegal surveillance activities that NSA and other governmental institutions are performing behind your back.
Unforeseen circumstances can happen at any time while using the computer: it can turn off due to a power cut, a Blue Screen of Death (BSoD) can occur, or random Windows updates can the machine when you went away for a few minutes. As a result, your schoolwork, important documents, and other data might be lost. To recover lost files, you can use Data Recovery Pro – it searches through copies of files that are still available on your hard drive and retrieves them quickly.
-
MiniTool
-
MiniTool News Center
- Fix «Cloud Files Diagnostic Event Listener» Failed to Start
By Daisy | Follow |
Last Updated May 15, 2023
Some users report that they receive the “Cloud Files Diagnostic Event Listener” failed to start with the following error: 0xC0000022 message after restarting their PC. This post from MiniTool offers some great solutions.
People have reported seeing the Session «Cloud Files Diagnostic Event Listener» failed to start with the following error: 0xC0000022 error message every time they restart their computer. It is a kernel event trace error.
This message is caused by insufficient access to the application, a damaged file system, some components of the system not turned on, etc. Some people say the error also started after installing OneDrive or Office 365.
Now, let’s see how to fix the “Cloud Files Diagnostic Event Listener” failed to start issue.
Fix 1: Disable OneDrive Files On-Demand
First, you can disable the Files On-Demand features in Onedrive. Follow the guide to do that:
Step 1: Right-click the OneDrive icon on your taskbar to choose the Help & Settings icon.
Step 2: Choose the Settings option.
Step 3: Go to the Sync and back up tab, and scroll down to find Advanced settings. Then, turn off the Files On-Demand option.
Fix 2: Reinstall Onedrive
Sometimes, the outdated OneDrive version can also cause the “Cloud Files Diagnostic Event Listener failed to start” issue. You can try to reinstall OneDrive.
Step 1: Press the Windows + I keys together to launch Settings and choose the Apps option.
Step 2: Under the Apps & features option, scroll down to find Microsoft OneDrive. Then, click Microsoft OneDrive and click the Uninstall button.
Step 3: Once done, open Microsoft Store. Type OneDrive in the search field.
Step 4: Then, click the Get button to download and install the Microsoft OneDrive app.
Fix 3: Perform a System Restore
If the above solutions are not working, you can try to perform a system restore to fix the “Cloud Files Diagnostic Event Listener failed to start” issue since the issue can be caused by the damaged system files. You need to notice that only if you have created a system restore point, you can try this method. Follow the guide below to do that.
Step 1: In the start menu, search for create a recovery drive and open it. This will lead you to the system protection tab in the system properties.
Step 2: Then, click system restore. Now select the restore point to which you want to restore your system.
Step 3: Click the Scan for affected programs button. This will tell what changes will be made. This will let you know what apps will be removed or added to your system because they were added or removed after creating the restore point.
Step 4: Then, click Next to continue with system restore. Once done, click Finish, and then close the window. This will restore your system to the system restore point.
Tip: It’s recommended to back up your system regularly with the free backup software – MiniTool ShadowMaker. Backing up your system in advance can not only protect your data but also allows you to restore your system easily and quickly when your PC encounters some system issues.
Free Download
Final Words
To sum up, this post has introduced how to fix the “Cloud Files Diagnostic Event Listener failed to start” issue. If you want to fix the issue, you can take the above solutions. If you have any different ideas to fix the issue, you can share them in the comment zone.
About The Author
Position: Columnist
Daisy graduated with a major in English and then joined MiniTool as an editor. She specializes in writing articles about backing up data & systems, cloning disks, and syncing files, etc. She is also good at writing articles about computer knowledge and computer issues. In daily life, she likes running and going to the amusement park with friends to play some exciting items.
You should make sure that essential Windows features are turned on
by Sagar Naresh
Sagar is a web developer and technology journalist. Currently associated with WindowsReport and SamMobile. When not writing, he is either at the gym sweating it out or playing… read more
Updated on May 12, 2023
Reviewed by
Alex Serban
After moving away from the corporate work-style, Alex has found rewards in a lifestyle of constant analysis, team coordination and pestering his colleagues. Holding an MCSA Windows Server… read more
- Users facing the Cloud Files Diagnostic Event Listener errors are reporting getting occasional BSoD screens.
- This could be because some important system files are corrupt on your PC.
- You should also try running the program as an administrator and check if this fixes the issue.
XINSTALL BY CLICKING THE DOWNLOAD FILE
This software will repair common computer errors, protect you from file loss, malware, hardware failure and optimize your PC for maximum performance. Fix PC issues and remove viruses now in 3 easy steps:
- Download Restoro PC Repair Tool that comes with Patented Technologies (patent available here).
- Click Start Scan to find Windows issues that could be causing PC problems.
- Click Repair All to fix issues affecting your computer’s security and performance
- Restoro has been downloaded by 0 readers this month.
Many of our readers have reported coming across the Cloud Files Diagnostic Event Listener failed to start with error code 0xC0000022 on their Windows 11 PCs. This error pops up when the system files are corrupt or missing.
This issue could pop up because of various reasons which we will be discussing in this guide as well. Let us get right into it.
Why do I get the Cloud Files Diagnostic Event Listener error?
We did some research and found some reasons that trigger the Cloud Files Diagnostic Event Listener error, some of which are listed below.
- Issues with OneDrive: Several of our readers have pointed out that because of some underlying problem with OneDrive, they were coming across this error.
- Corrupt system files: Missing or corrupt system files can often cause multiple issues such as the error.
- Insufficient permissions: Chances are you haven’t granted sufficient permission to the application which is why you are getting the Cloud Files Diagnostic Event Listener error.
- Some Windows features are disabled: Some essential Windows features required for the program to run might be disabled on your PC.
Let us take a look at the solutions that will help you resolve the Cloud Files Diagnostic Event Listener error.
How do I fix the Cloud Files Diagnostic Event Listener error?
- Why do I get the Cloud Files Diagnostic Event Listener error?
- How do I fix the Cloud Files Diagnostic Event Listener error?
- 1. Disable the OneDrive Files on Demand feature
- 2. Reinstall OneDrive
- 3. Run the program as an administrator
- 4. Fix corrupt system files
- 5. Enable essential Windows features
- 6. Use System Restore
1. Disable the OneDrive Files on Demand feature
- Right-click on the OneDrive taskbar icon.
- Click the cogwheel icon and select Settings.
- Under the Settings tab, uncheck Save space and download files as you use them.
- Click OK to apply the changes, then restart your PC.
2. Reinstall OneDrive
- Press the Win key to open the Start menu.
- Type Control Panel and open it.
- Select Programs and Features.
- Click on OneDrive and select Uninstall at the top.
- Follow the on-screen steps to completely remove the program.
- Visit the official OneDrive website, download the installer, and run it to get a fresh copy of OneDrive.
Some of our readers have pointed out that reinstalling the OneDrive app on their Windows 11 PCs has fixed the Cloud Files Diagnostic Event Listener error.
3. Run the program as an administrator
- Right-click on the app icon and select Properties.
- Switch to the Compatibility tab.
- Check the box for Run this program as an administrator.
- Click Apply and OK.
The program might require some special permissions to run on your PC. In such a case, a simple fix would be to run the program as an administrator.
- Apoint.exe: What is it & How to Fix its Errors
- NTVDM.exe: What is it & How to Fix its Errors
4. Fix corrupt system files
- Open the Start menu by pressing the Win key.
- Type Command Prompt and open it as an admin.
- Type the below command and press Enter.
sfc /scannow
- Wait for the process to fix the system files and restart your PC.
Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken.
We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.
Click here to download and start repairing.
Corrupt system files can cause your PC to misbehave and cause issues such as Cloud Files Diagnostic Event Listener error. Fix it by running the simple command.
5. Enable essential Windows features
- Press the Win key to open the Start menu.
- Type Control Panel and open it.
- Select Programs and Features.
- Click Turn Windows features on or off.
- Expand Legacy Components.
- Check the box for DirectPlay.
- Click OK.
- Wait for the components to load and restart your PC.
Essential components are required for some programs to function smoothly. Chances are the program isn’t able to load the required features because of which you are getting the Cloud Files Diagnostic Event Listener error.
One reader suggested that turning on the DirectPlay Windows feature helped them eliminate the error and fix it.
6. Use System Restore
- Press the Win key to open the Start menu.
- Type create a restore point and open it.
- Select System Restore.
- Click Next.
- Choose the restore point.
- Select Next and click Finish.
Do note that system restore will work only if you already have a system restore point created. We have a guide that explains how to create a system restore point.
That is it from us in this guide. We have a guide that lists some of the best tools that you can use to fix system crashes as well as BSoD errors.
Feel free to drop a comment below and let us know which solution helped you fix the Cloud Files Diagnostic Event Listener error.
Still having issues? Fix them with this tool:
SPONSORED
If the advices above haven’t solved your issue, your PC may experience deeper Windows problems. We recommend downloading this PC Repair tool (rated Great on TrustPilot.com) to easily address them. After installation, simply click the Start Scan button and then press on Repair All.
Answers Search:
NewsAnswersArticlesBlogs & ForumsFor Sale OnlineStudent ResourcesMeta SearchTips
Question
Issue: How to fix Session «Cloud Files Diagnostic Event Listener» failed to start with the following error: 0xC0000022?
Hello. Every time I reboot my computer I receive the “”Cloud Files Diagnostic Event Listener” failed to start with the following error: 0xC0000022″ message. What should I do?
Solved Answer
By using Kernel-EventTracing,[1] Windows users are able to see any errors that might have occurred. With kernel tracing, information is logged about different kernel events so as to optimize performance and get rid of any bottlenecks. This is all done at a system level so that people can monitor the activity and interactions of processes and threads.
Session “Cloud Files Diagnostic Event Listener” failed to start with the following error: 0xC0000022 is a Kernel-EventTracing error. This message is caused in Windows by duplicated application files. Some people say that the error started appearing after OneDrive or Office 365 installations.
People report seeing the error message every time they reboot their computer which can get annoying. There are a couple of ways this issue can be taken care of. Some people report that they managed to get rid of the error by disabling “Files On-Demand” in OneDrive.
Other users were not so lucky and had to completely reinstall OneDrive. If these fixes we propose do not get rid of the problem, there is a built-in system restore tool. It can revert the Windows system to a previous point before any issues started appearing.
So, in this guide, you will find 3 steps that should help you fix the Session “Cloud Files Diagnostic Event Listener” failed to start with the following error: 0xC0000022 message. However, manual troubleshooting can be a lengthy process. You can use a maintenance tool like RestoroMac Washing Machine X9. It can fix most system errors, BSODs,[2] corrupted files, and registry[3] issues. Otherwise, follow the step-by-step instructions below.
Solution 1. Disable OneDrive Files On-Demand
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
- Make sure you’re signed in to OneDrive on your computer
- Select the OneDrive cloud icon in the Windows taskbar notification area
- In the activity center, select More, then go to Settings
- On the Settings tab, unselect the Save space and download files as you use them box
Solution 2. Reinstall OneDrive
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
- Press the Windows key + X to open the Quick Access menu
- Select Command Prompt (Admin)
- Type the following command and hit Enter to terminate any process of OneDrive:
taskkill /f /im OneDrive.exe - To uninstall the OneDrive from Windows 10 64-bit, enter the following commands:
%systemroot%SysWOW64OneDriveSetup.exe /uninstall - If you’re running the 32-bit version of Windows 10, type this command instead:
%systemroot%System32OneDriveSetup.exe /uninstall
- Now you can install it from Command Prompt
- Press the Windows key + X again
- Select Command Prompt (Admin)
- To install the OneDrive in Windows 10 64-bit, enter the following command:
%systemroot%SysWOW64OneDriveSetup.exe - If you’re running the 32-bit version of Windows 10, type this command instead:
%systemroot%System32OneDriveSetup.exe - Restart the computer and use OneDrive
Solution 3. Use System Restore
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
If none of the above methods fixed the error, try System Restore. It is a built-in Windows tool that lets you revert your system back to a previous point. Keep in mind that any programs that you installed after the date you select, will be uninstalled:
- Type in Create a System Restore Point in Windows search and hit Enter
- Click on System Restore
- Select Choose a different restore point (if available) and click Next
- Mark the Show more restore points checkbox
- Choose the date before you started experiencing the issue
- Click Next and reboot the system as required
Repair your Errors automatically
ugetfix.com team is trying to do its best to help users find the best solutions for eliminating their errors. If you don’t want to struggle with manual repair techniques, please use the automatic software. All recommended products have been tested and approved by our professionals. Tools that you can use to fix your error are listed bellow:
do it now!
Download Fix
Happiness
Guarantee
do it now!
Download Fix
Happiness
Guarantee
Compatible with Microsoft Windows
Compatible with OS X
Still having problems?
If you failed to fix your error using RestoroMac Washing Machine X9, reach our support team for help. Please, let us know all details that you think we should know about your problem.
Restoro — a patented specialized Windows repair program. It will diagnose your damaged PC. It will scan all System Files, DLLs and Registry Keys that have been damaged by security threats.Mac Washing Machine X9 — a patented specialized Mac OS X repair program. It will diagnose your damaged computer. It will scan all System Files and Registry Keys that have been damaged by security threats.
This patented repair process uses a database of 25 million components that can replace any damaged or missing file on user’s computer.
To repair damaged system, you have to purchase the licensed version of Restoro malware removal tool.To repair damaged system, you have to purchase the licensed version of Mac Washing Machine X9 malware removal tool.
To stay completely anonymous and prevent the ISP and the government from spying on you, you should employ Private Internet Access VPN. It will allow you to connect to the internet while being completely anonymous by encrypting all information, prevent trackers, ads, as well as malicious content. Most importantly, you will stop the illegal surveillance activities that NSA and other governmental institutions are performing behind your back.
Unforeseen circumstances can happen at any time while using the computer: it can turn off due to a power cut, a Blue Screen of Death (BSoD) can occur, or random Windows updates can the machine when you went away for a few minutes. As a result, your schoolwork, important documents, and other data might be lost. To recover lost files, you can use Data Recovery Pro – it searches through copies of files that are still available on your hard drive and retrieves them quickly.
You may have seen an error message saying “Cloud Files Diagnostic Event Listener failed to start with the following error: 0xC0000022” every time you start your computer and we understand how irritating the issue is! But what can you do now?
This error message may appear due to duplicated application files in Windows. However, many believe that the error appears after the installation of OneDrive or Office 365.
Whatever the reason is, I will describe the fixes in detail to recover you from the appeared error in this entire article. Let’s explore without wasting any of your valuable time.
Why Do “Cloud Files Diagnostic Event Listener Fail to Start With The Following Error: 0xC0000022” Occur?
The “Cloud Files Diagnostic Event Listener Fail to Start With The Following Error: 0xC0000022” mainly occurs because of the duplicated application files in the Windows operating system. However, it can occur after the installation of OneDrive or Microsoft Office 365.
According to reports, people who have faced the same issue have managed to get rid of it by disabling “Files On-Demand” in OneDrive. Again, some of them had to reinstall OneDrive to resolve it.
Also, the built-in system file checker tool of Windows is proven helpful in solving this error. Let’s try all the solutions until we completely resolve the error.
What to Do With ‘Cloud Files Diagnostic Event Listener’ Error Message
The error is not a risk factor at all. In fact, there are only a few things you may apply to fix the discussed error. These are-
- Fix 1: Disable OneDrive Files On-Demand
- Fix 2: Use System File Checker (SFC)
- Fix 3: Reinstall OneDrive
Fix 1: Disable OneDrive Files On-Demand
Follow the steps below to disable ‘Files On-Demand’ and resolve the “Cloud Files Diagnostic Event Listener Fail to Start With The Following Error: 0xC0000022” isser.
Step 1
Sign in to OneDrive on your computer.
Step 2
From the Windows taskbar notification area, click on the OneDrive cloud icon and then click on the gear icon > Settings.
Step 3
Now while in the Sync & Backup tab, click Advanced Settings.
Step 4
After that, scroll down and disable the Files On-Demand option by toggling it to Off.
Step 5
Finally, click OK to download all files to the PC.
Fix 2: Use System File Checker (SFC)
Let’s try a first-hand fix as an initial action. It is supposed to use SFC (System File Checker) to recover the cloud files. I will describe the process step by step below.
Step 1
Press the Windows key and type ‘cmd’. Accordingly, you will see the ‘Command Prompt‘ preface on the top of the appeared interface. From here, you have to select the ‘Run as administrator’ option.
Step 2
Next, you have to allow ‘User Account Control’. To do so, click on ‘Yes’.
Step 3
As a result, the ‘Command Prompt’ window will become evident. You have to copy the below text and paste it into the window.
‘SFC /scannow’
After that, hit the ‘enter’ key. Then the process will start. It may take several times to complete. Finally, check the OneDrive. It will be fine if it works. But if not, you need to follow the next fix.
Fix 3: Reinstall OneDrive
The very possible fix for the discussed error is to reinstall OneDrive. You have to work with the ‘Administrator: Command Prompt’ window again to apply the fix. The process has two parts. Firstly, you have to uninstall it. Then install it again to complete the procedure. I will give the in detail steps below.
Step 1
Tap the Windows key and type ‘cmd’. Then select the ‘Run as administrator’ option. Accordingly, you will get the window on the screen.
Step 2
Here you have to copy the below command and paste it into the window to terminate all OneDrive processes.
‘taskkill /f /im OneDrive.exe’
Hit the ‘enter’ button then.
Step 3
After that, you have to copy the below command text and paste it into the appeared window.
‘%systemroot%SysWOW64OneDriveSetup.exe /uninstall’
Then press the ‘enter’ button. Consequently, OneDrive will uninstall from the system.
Step 4
Next, you have to install OneDrive again. To do so, open the ‘Administrator: Command Prompt’ window. Then copy the below command text and paste it into the window.
‘%systemroot%SysWOW64OneDriveSetup.exe’
Then hit the ‘enter’ button. OneDrive will install within a couple of moments. You just need to follow the on-screen direction to complete the process successfully. In the end, you have to restart the PC.
Final Words
Hopefully, the OneDrive will work smoothly, and cloud files diagnostic event listener will no more exist. Additionally, I would like to remind you that you can reinstall the OneDrive by using Command Prompt only.
The periodic monitoring of system logs on ‘Windows Operating System’ is good for gauging system health. The ‘Event Viewer’ tool is used to see the logs of errors and warnings thrown by the system. It can be started by running following command
(I use Windows10).
Windows+R (Run) > eventvwr.exe
Noticed the frequently appearing error: Session “CldFltLog” failed to start with the following error: 0xC0000022
Online search showed that this is a common bug. The remedies provided by professional help staff were heart aching, for example one guy suggests reinstalling the windows. However, the real problem – as noted by several users – is Microsoft “OneDrive” cloud app. The error was removed by closing the app.
Quote from a user in the below given link observes:
I simply disabled OneDrive in the Startup tab of Task Manager and restarted. No more kernel event error. While the event viewer was still open, I double-clicked on the OneDrive.exe file in UsersUsernameAppDataLocalMicrosoftOneDrive to start it manually. Immediately, the ‘Session “Cloud Files Diagnostic Event Listener” failed to start with the following error: 0xC0000022’ showed up again. I will assume it’s a benign error, so I’ll leave it be, but I do hope that Microsoft will look into it and stop advising customers to do clean boots, safe-mode boots, create new user profiless and re-install Windows. You have obviously pinpointed the source of the error (Thank You), so the rest is up to them to fix. It’s sad to say, but based on all the various COM and other event viewer errors that continue to appear throughout all the Windows builds, I don’t think MS will consider this to be a priority. 🙂
References:
https://answers.microsoft.com/en-us/windows/forum/windows_10-performance/error-message-0xc0000022/091ded48-b211-44d7-a3bd-563d1764aa1a
Audit event has been dropped
Audit events have been dropped by the transport 0.
Log name:security
source : event log
task category : event processing
keywords : audit success
level :error
event id : 1101
Proof for this event log error,
solution:
Find the solution by ‘security channel publishing’ from http://technet.microsoft.com/en-us/library/cc727052(WS.10).aspx
O+ error Windows 7
I obtained an error message displayed in the window as ‘O+’ when i try to run the (.exe)application software from the DVD RW Drive.Below is the proof for this error,
solution:
Find the solution by ‘security channel publishing’ from http://technet.microsoft.com/en-us/library/cc727052(WS.10).aspx
O+ error Windows 7
I obtained an error message displayed in the window as ‘O+’ when i try to run the (.exe)application software from the DVD RW Drive.Below is the proof for this error,
I think this error is because of try to running the application within the cd/dvd drive instead of copying to the system drive.But such errors are very rare to see across the pc’s.
Error 1303 Windows7 No directory access
Error1303. The installer has insufficient previleges to access this directory:
…x86_Microsoft.MSXML2_6bd6b9abf345378f_4.20.9818.0_x-ww_8ff50c5d.The installation cannot continue.Log on as an administrator or contact your support.
I obtained the above error when i try to install sony ericsson pc suite for the w200i model.But the error points out that ‘to be log on as administrator’.Yes i logged as it,but I dont know why the error message pointed to be as ‘administrator’.Below is the proof for this error,
Solution:
I think this may because of compatibility problem between application software and system software.In my system the above error occurs in the windows7 platform.
‘MsiInstaller’ Error code 1642
Product:Microsoft.NET Framework1.1-Update ‘{411EDCF7-755D-414E-A74B-3DCD6583F589}’ could not be installed.Error code 1642.Windows installer can create logs to help troubleshoot issues with installing software packages.Use the following link for instructions on turning on logging support.
http://go.microsoft.com/fwlink/?LinkId=23127
Log name: application
Source:msiInstaller
Level : error
event id : 1024
I found the above microsoft windows error in event viewer logs.This is an installation failure error,here is the microsoft’s dotnet framework update could not be installed.Below is the proof for this error,
Solution:
I think this may because of compatibility problem between application software and system software.In my system the above error occurs in the windows7 platform.
‘MsiInstaller’ Error code 1642
Product:Microsoft.NET Framework1.1-Update ‘{411EDCF7-755D-414E-A74B-3DCD6583F589}’ could not be installed.Error code 1642.Windows installer can create logs to help troubleshoot issues with installing software packages.Use the following link for instructions on turning on logging support.
http://go.microsoft.com/fwlink/?LinkId=23127
Log name: application
Source:msiInstaller
Level : error
event id : 1024
I found the above microsoft windows error in event viewer logs.This is an installation failure error,here is the microsoft’s dotnet framework update could not be installed.Below is the proof for this error,
Solution:
For finding solutions to these types of windows software installation errors,first set up logging (visit http://go.microsoft.com/fwlink/?LinkId=23127 to know about windows logging) and then with help of the created log files find the solutions.
See Also :
windows update standalone installer error
Network Diagnostics Framework Failed
An error occured.The network Diagnostics Framework failed to complete the repair phase of operation.A windows error report was generated.[2147942487].
Log name:system
Source : Diagnostics-Networking
Task category : repair failure
event id : 5300
The above windows error may occur while trying to diagnose any network connections for connecting the internet.Below is the error proof,
Fatal Alert 48 was generated SChannel
The following fatal alert was generated: 48. The internal error state is 552.
The following fatal alert was generated: 10. The internal error state is 10.
Logname:system
Source:SChannel
EventID:36888
Do you know the word fatal error describes, its a fatal exception error which causes application to crash without rebooting the system, but the data processed at that time is lost. We can troubleshoot this error from the log and dump files created when the error occurs. Fatal alert may occur, if there is any illegal attempt made to accessing the code or any instructions processing by the application program.
I found the above error in my system’s event viewer log file. The term SChannel mean security channel which deals with security. Refer the following site http://msdn.microsoft.com/en-us/library/aa374782(VS.85).aspx to know about schannel.
Below is the proof for this security error.
Fatal Alert 48 was generated SChannel
The following fatal alert was generated: 48. The internal error state is 552.
The following fatal alert was generated: 10. The internal error state is 10.
Logname:system
Source:SChannel
EventID:36888
Do you know the word fatal error describes, its a fatal exception error which causes application to crash without rebooting the system, but the data processed at that time is lost. We can troubleshoot this error from the log and dump files created when the error occurs. Fatal alert may occur, if there is any illegal attempt made to accessing the code or any instructions processing by the application program.
I found the above error in my system’s event viewer log file. The term SChannel mean security channel which deals with security. Refer the following site http://msdn.microsoft.com/en-us/library/aa374782(VS.85).aspx to know about schannel.
Below is the proof for this security error.
Recommended post:
event id 36887 fatal alert 20
Transaction Resource Manager Error (Ntfs)
The default transaction resource manager on volume 1: encountered a non retryable error and could not start.The data contains the error code.
Log name: system
source :ntfs
event id :137
level : error
I found the above error in event viewer log.Below is the image proof for that error,
Device Status : ADSL is Down
ADSL ROUTER
DEVICE STATUS
Your ADSL is down,please check your ADSL line is plugged correctly!
The above error occurs if we wrongly connect the wires between modem, phone and wall socket. Below is the proof for such type of error. Here i used binatone modem.This may also happen if there is a broken cables.
Airtel Internet Activation Error 5006
Your internet activation process got interrupted.
Modem (MAC id)
Device details not found.Please restart the modem and after two minutes launch web based activation flow again.Error code : 5006
The above error occured while try to activate the airtel broadband connection.Below is the proof for this error,
Airtel Internet Activation Error 5006
Your internet activation process got interrupted.
Modem (MAC id)
Device details not found.Please restart the modem and after two minutes launch web based activation flow again.Error code : 5006
The above error occured while try to activate the airtel broadband connection.Below is the proof for this error,
Solution:
I think the above error is because of incorrect modem mac address.TO SOLVE THIS WE HAVE TO KNOW THE INFORMATION ABOUT HOW TO GET THE MODEM MAC ID.And we have to choose the relevant mac id for the modem.
Error 718 connecting to broadband connection
Error 718 : The connection was terminated because the remote computer did not respond in a timely manner.
I obtained the above error while i try to connecting internet by broadband connection.The error occured at the time when username and password is verifying.Below is the proof for this Broadband connecting error.
I think this is because of timeout connection.Solution is just try one more time to connect the net.
DHCP Failed to assign ip address
Your computer was not assigned an address from the network (by the DHCP server) for the network card with network address 0x001EEC6F8B82.The following error occured :0x79.Your computer will continue to try and obtain an address on its own from the network address(dhcp server).
Log name : microsoft windows DHCP client Events/Admin
Source : dhcp client
level : error
event id : 1001
user : LOCAL SERVICE
opcode : ip address not assigned
task category : address configuration state event
I obtained the above error because,dhcp fails to assign ip address automatically to my network.Below is the proof for this error,
I think this is because of timeout connection.Solution is just try one more time to connect the net.
DHCP Failed to assign ip address
Your computer was not assigned an address from the network (by the DHCP server) for the network card with network address 0x001EEC6F8B82.The following error occured :0x79.Your computer will continue to try and obtain an address on its own from the network address(dhcp server).
Log name : microsoft windows DHCP client Events/Admin
Source : dhcp client
level : error
event id : 1001
user : LOCAL SERVICE
opcode : ip address not assigned
task category : address configuration state event
I obtained the above error because,dhcp fails to assign ip address automatically to my network.Below is the proof for this error,
solution :
- check your network by using ping command in command prompt.
- verify if the fault is identified and corrected according to instructions provided in microsoft technet (http://technet.microsoft.com/en-us/library/dd380233(WS.10).aspx) — DHCP client ip lease validity.
Error code 0x2 DHCPv6-client:
An error occured in initializing the interface.The error code is:0x2
Log name : microsoft windows dhcp version 6 events/admin
source : dhcp v6- client
Task category : address configuration state event.
Event id : 1008
solution :
To solve this error you must know how to configure the ‘dhcp client network interface’.For dhcp client configuration and verification refer the following microsoft technet site http://technet.microsoft.com/en-us/library/cc774826(WS.10).aspx
See Also : The post related to network connection.
error code 651 —Broadband connection
opera crashed error report
OPERA-CRASHLOG V1 desktop 10.63 3516 windows
Opera.exe 3516 caused exception C0000005 at address 64AFCB69 (Base: E0000)
Opera crash log also displays FPU Stack,stack dump information.Below is the proof for this crash.At the time when the opera crashes it loads web pages very slow.I mean that i found symptom as slow performance from the browser as well system before opera crashes.This may because of spywares.Below is the proof for this browser error.If you found any crashes then just made a crash log submission to find out thecsolutions.
solution :
To solve this error you must know how to configure the ‘dhcp client network interface’.For dhcp client configuration and verification refer the following microsoft technet site http://technet.microsoft.com/en-us/library/cc774826(WS.10).aspx
See Also : The post related to network connection.
error code 651 —Broadband connection
opera crashed error report
OPERA-CRASHLOG V1 desktop 10.63 3516 windows
Opera.exe 3516 caused exception C0000005 at address 64AFCB69 (Base: E0000)
Opera crash log also displays FPU Stack,stack dump information.Below is the proof for this crash.At the time when the opera crashes it loads web pages very slow.I mean that i found symptom as slow performance from the browser as well system before opera crashes.This may because of spywares.Below is the proof for this browser error.If you found any crashes then just made a crash log submission to find out thecsolutions.
Controller error on device CdRom0
The driver detected a controller error on Device CdRom0
Logname: system
source:cd rom
Level : error
I found the above error on event log files.Then i checked solution on microsoft technet but there is no solution found for this error.
I think this error could happen while try to burn the cd with inadequate disc size or there is a fault on the inserted device.Below is the proof for this error.
Controller error on harddisk:
Event Description:
The driver detected a controller error on DeviceHarddisk1D.
Event id : 11
Source : Disk
Error codes :
0068030e 00b60001 00000000 c004000b
0010: 00000103 00000000 00000000 00000000
0020: 00000000 00000000 00002e0a 00000000
0030: ffffffff 00000006 00000040 00000000
0040: 120600ff 0000000c 00000000 0000000a
0050: 00000000 8a434248 00000000 899d3840
0060: 00000000 00000000 00000000 00000000
0070: 00000000 00000000 00000000 00000000
0080: 00000000 00000000 00000000 00000000
Solution :Check for hardware failure like loose cable,loose disk controller card or a cable failure.If it founds any flaw in the hardware then simply replace it with new flawless hardware.This event causes an error, while ejecting ‘DVD RW drive’
I think this error could happen while try to burn the cd with inadequate disc size or there is a fault on the inserted device.Below is the proof for this error.
Controller error on harddisk:
Event Description:
The driver detected a controller error on DeviceHarddisk1D.
Event id : 11
Source : Disk
Error codes :
0068030e 00b60001 00000000 c004000b
0010: 00000103 00000000 00000000 00000000
0020: 00000000 00000000 00002e0a 00000000
0030: ffffffff 00000006 00000040 00000000
0040: 120600ff 0000000c 00000000 0000000a
0050: 00000000 8a434248 00000000 899d3840
0060: 00000000 00000000 00000000 00000000
0070: 00000000 00000000 00000000 00000000
0080: 00000000 00000000 00000000 00000000
Solution :Check for hardware failure like loose cable,loose disk controller card or a cable failure.If it founds any flaw in the hardware then simply replace it with new flawless hardware.This event causes an error, while ejecting ‘DVD RW drive’
Burning Errors (CD /DVD)
Burning error occured
An error occured while burning the disc.Most likely the disc is not usable.Usually,these errors happen if the inserted media is not compatible to the drive or of poor quality.
(devNoSeekComplete) Could not write to disc (LBA: 22880 Length :26)
No Seek Complete :-0x030200
I obtained the above error when i try to burn the movie (700mb) to the empty cd of size 700mb by using the software CDBurnerxp.Below is the proof for this error.I think this may because of inadequate space in cd or the inserted cd may not compatible for the drive.
To fix this error try to use another cd or burner.
DVD maker error :
While i attempting to burn DVD with the help of dvd maker i obtained an error.Below is the error statement provided as it is displayed in my event viewer.
‘The DVD maker engine returned an error code (-19034) when burning the disc‘.
log name : application.
source : dvd maker.
event id : 1001.
Note : The error happened at the time of encoding operation.Below is the image proof for this error.
DVD maker error :
While i attempting to burn DVD with the help of dvd maker i obtained an error.Below is the error statement provided as it is displayed in my event viewer.
‘The DVD maker engine returned an error code (-19034) when burning the disc‘.
log name : application.
source : dvd maker.
event id : 1001.
Note : The error happened at the time of encoding operation.Below is the image proof for this error.
The same error may also occurs with different event id-s like (1001,1002)and with error codes(0xFFFFB5A6).
SSL Connection Error in Chrome browser
SSL Connection Error
Unable to make a secure connection to the server.This may be a problem with the server or it may be requiring a client authentication certificate that you dont have.
Error 107 (net::ERR_SSL_PROTOCOL_ERROR) ssl protocol error
I obtained the above error when i try to open gmail login page.Below is the proof,
Recommended: Ensure that the address bar hold security identity such that having green bar or green lock. http://www.youtube.com/watch?v=dcmLDNbNuLc
IPMONTR.DLL cannot be loaded
The following helper DLL cannot be loaded : IPMONTR.DLL
I found the above helper dll failed to start or load error, when i performed command line operation for displaying WLAN settings as follows,
- cmd->netsh wlan show settings
- The above command displays details about wlan characteristics including auto configuration for wireless local area network enabled or not.
- At this time the above mentioned helper dll error message was displayed.
Below is the proof for this error,
Recommended: Ensure that the address bar hold security identity such that having green bar or green lock. http://www.youtube.com/watch?v=dcmLDNbNuLc
IPMONTR.DLL cannot be loaded
The following helper DLL cannot be loaded : IPMONTR.DLL
I found the above helper dll failed to start or load error, when i performed command line operation for displaying WLAN settings as follows,
- cmd->netsh wlan show settings
- The above command displays details about wlan characteristics including auto configuration for wireless local area network enabled or not.
- At this time the above mentioned helper dll error message was displayed.
Below is the proof for this error,
Timeout Reached error Windows Service
Error message :’A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Netman service’.
Log name: system
source : service control manager
event id : 7011
level : error
The same error might also happen for the services including ‘ShellHWDetection’, ‘PcaSvc‘ and ‘AntiVirScheduler’.Symbolic name to represent the error is ‘EVENT_TRANSACT_TIMEOUT’.
I found the above error in event viewer.This error occured because the requested service fails to happen or respond within the defined timeout period (ie.default timeout period is 30000 milliseconds).
Below is the proof for this error,
Solution:
To solve this error change all the default timeout values for all services.To do this ,refer the steps followed below,
- Open regedit and in the Registry Editor, click the registry subkey HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControl
- In the details pane, locate the ServicesPipeTimeout entry, right-click that entry and then select Modify.
Note: If the ServicesPipeTimeout entry does not exist, you must create it by selecting New on the Edit menu, followed by the DWORD Value, then typing ServicesPipeTimeout, and clicking Enter.
- Click Decimal, enter the new timeout value in milliseconds, and then click OK.
- Restart the computer.
- It is also recommended to verify that the service is configured properly and ensure that the system is in healthy state (i.e not running low on resources).
RSL Error 1 of 1 ‘Error #2032’
When i try to load the video player i obtained an error message as «RSL Error 1 of 1«.It is also mentioned ‘Error #2032′ at bottom of the player.I think this may because of problems in player or plugin.Generall for having display problem with flash player such as poor picture quality or slow display times deselect enable hardware acceleration(note : By using chrome’s FPS counter we can view the page’s actual frame rate,in frames per second,when hardware acceleration is active) in the display panel.
For more help regarding video player settings and display problems visit its official site.
Another solution i recommend here to solve this rsl 1 of 1 error is update your video player and plugin or try reloading the page.
AJAX error : 0
When i made a search from itdictionary.org i obtained an error message as ‘the page at (website address) says : AJAX error:0′.
Generally,AJAX is asynchronous javascript and xml.It is a group of interrelated webdevelopment technique used on client side to create interactive web applications.With AJAX,web application can retrieve data from server asynchronously in the background without interfering with display and behaviour of the existing page.To know more about AJAX programming visit http://en.wikipedia.org/wiki/Ajax_(programming).
Proof for this error message,
Solution:
To solve this error change all the default timeout values for all services.To do this ,refer the steps followed below,
- Open regedit and in the Registry Editor, click the registry subkey HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControl
- In the details pane, locate the ServicesPipeTimeout entry, right-click that entry and then select Modify.
Note: If the ServicesPipeTimeout entry does not exist, you must create it by selecting New on the Edit menu, followed by the DWORD Value, then typing ServicesPipeTimeout, and clicking Enter.
- Click Decimal, enter the new timeout value in milliseconds, and then click OK.
- Restart the computer.
- It is also recommended to verify that the service is configured properly and ensure that the system is in healthy state (i.e not running low on resources).
RSL Error 1 of 1 ‘Error #2032’
When i try to load the video player i obtained an error message as «RSL Error 1 of 1«.It is also mentioned ‘Error #2032′ at bottom of the player.I think this may because of problems in player or plugin.Generall for having display problem with flash player such as poor picture quality or slow display times deselect enable hardware acceleration(note : By using chrome’s FPS counter we can view the page’s actual frame rate,in frames per second,when hardware acceleration is active) in the display panel.
For more help regarding video player settings and display problems visit its official site.
Another solution i recommend here to solve this rsl 1 of 1 error is update your video player and plugin or try reloading the page.
AJAX error : 0
When i made a search from itdictionary.org i obtained an error message as ‘the page at (website address) says : AJAX error:0′.
Generally,AJAX is asynchronous javascript and xml.It is a group of interrelated webdevelopment technique used on client side to create interactive web applications.With AJAX,web application can retrieve data from server asynchronously in the background without interfering with display and behaviour of the existing page.To know more about AJAX programming visit http://en.wikipedia.org/wiki/Ajax_(programming).
Proof for this error message,
Site is offline Try Again Later
Genarally,we all know about offline — not connected to INTERNET.Here i found an unusual message while i am trying to visit the site myunit.sodexonet.com as
«Site is offline.Try again later«.
Then i checked whether the site is up or down and i found that it is up.Then i doubted why such an message.If the site’s status is offline then it is said to be down.But i dont know why such an message even if the site is found to be up.
Below is the proof for this error message,
Microsoft Word Document error
Word experienced an error trying to open the files.
Try these suggestions
- check the file permission for the document or drive.
- Make sure there is sufficient memory and disk space
- Open the file with the text recovery converter
Proof for this error,
Microsoft Word Document error
Word experienced an error trying to open the files.
Try these suggestions
- check the file permission for the document or drive.
- Make sure there is sufficient memory and disk space
- Open the file with the text recovery converter
Proof for this error,
This error message can appear for several reasons as listed below,
The document may be corrupt or damaged. Use either the Recover Text converter or the Open and Repair feature. Both are available from the Open dialog.
NOTE: If you have opened a file that is attached to an e-mail message, it is recommended that you save the file to a local hard disk first before attempting to recover or repair the file.
The Open and Repair feature is available from the Open dialog box. To open and attempt a repair, click the File tab, click Open, and then navigate to the damaged file and click it once. Instead of clicking the Open button at the bottom right of the dialog box, click the down arrow to the right of the button and select Open and Repair from the menu. If the file can be recovered, it will open and appear in the document work area.
The Recover Text converter is available from the Open dialog box and appears in the Files of type drop down list. It appears in the drop-down list as: Recover Text from Any File (*.*).
The Recover Text converter has its limitations. Document formatting is lost, along with anything that is not formatted as text. Graphics, fields, drawing objects, and so on, are not converted. However, headers, footers, footnotes, endnotes, and field text are retained as simple text.
File permissions may be set so that you cannot access the file (read denied). It is also possible that you do not have permissions to open anything within the drive or folder that contains the file. In this case, contact the owner of the drive or folder and request permissions to access the file.
It is possible that you have run out of system resources (disk space or RAM), or that another program on your system has consumed all the available memory. It is also possible for a program to have a memory leak that is using up large quantities of memory. The best method to recover memory that has been consumed by a memory leak is to restart the computer. It may be possible to shut down the offending program by using the Task Manager, but it is not recommended since it may further destabilize the system.
There may be a read lock on the file that you are attempting to open. Another user may have the file open, or another application that has a link to the file may have placed an exclusive lock on the file, preventing Word from opening the file. If a custom application has opened the file, it may have opened the file using an incorrect method.
The file that you are attempting to open may require a file converter that is not installed on your computer. Most converters are installed by default, but optional converters are available from the Add or Remove Programs utility (in Control Panel) for your version of Office (requires performing an advanced customization install and searching the feature tree for Office Shared Features Converters and Filters). Other converters are available from the Office Resource Kit. Search the www.microsoft.com Web site for «Office Converter Pack».
For more information, see Microsoft Knowledge Base article 918429 from
http://support.microsoft.com/kb/918429.
VSS unexpected error querying IVssWriterCallback interface
Volume shadow copy service error : Unexpected error querying for the IVssWriterCallback interface. hr = 0x80070005,Access is denied.
This is often caused by incorrect security settings in either the writer or requestor process.
Operation :
Gathering writer data.
Context :
Writer Class ID: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Name : System Writer
Writer Instance ID : {ad2004e9-895e-44ff-815a-903f2b9fbda1}
Log name : application
source : VSS
event id : 8194
Solution :
Solution for this error is found on microsoft technet event online help
http://technet.microsoft.com/en-us/library/dd364922(WS.10).aspx
See Also :
volume shadow copy service error unexpected error calling routine cocreateinstance
Harddisk0 has a bad block
The device, DeviceHarddisk0DR0, has a bad block.
Log name : system
source : disk
level : error
Event Data : DeviceHarddisk0DR0
030068000100000000000000070004C0000100009C0000C00000000000000000001EBD1207000000460F050000000000FFFFFFFF00000000400000840200000000200A1240032000000000003C00000000A04207A070A48500000000007FA485385CB8858F5E8903280003895E8F0000EE00000000000000F00003000000000B00000000000000000000000000000000
Keywords :
Event id :7.
I found the above error in event viewer and i searched for solution from Microsoft Event log online help,but there is no available solutions for this bad block error.Below is the proof for this error,
Solution :
Solution for this error is found on microsoft technet event online help
http://technet.microsoft.com/en-us/library/dd364922(WS.10).aspx
See Also :
volume shadow copy service error unexpected error calling routine cocreateinstance
Harddisk0 has a bad block
The device, DeviceHarddisk0DR0, has a bad block.
Log name : system
source : disk
level : error
Event Data : DeviceHarddisk0DR0
030068000100000000000000070004C0000100009C0000C00000000000000000001EBD1207000000460F050000000000FFFFFFFF00000000400000840200000000200A1240032000000000003C00000000A04207A070A48500000000007FA485385CB8858F5E8903280003895E8F0000EE00000000000000F00003000000000B00000000000000000000000000000000
Keywords :
Event id :7.
I found the above error in event viewer and i searched for solution from Microsoft Event log online help,but there is no available solutions for this bad block error.Below is the proof for this error,
If anyone know solution for this problem,then please post it.
Turbo C Full Screen mode error
I opened my turbo c (structured programming language) software in windows 7 operating system for programming.By default,turboc window opens as smaller size.Then i try to make it full screen by using the key combination Alt+Enter,but it gets failed to open in full screen and also it displays a message window as,
C:WindowsSystem32cmd.exe-tc
This system does not support full screen mode
I thought that it may because of compatibility problem.Below is the proof,
Solution :
I found a very simple indirect solution for this problem.Just do what i followed in the below video.
See Also :
Programming error from C language
Microsoft security essentials oobe stopped
Session «Microsoft Security Essentials OOBE» stopped due to the following error:0xC000000D
Log name :Microsoft-windows-Kernel-EventTracing/Admin
Source : kernel event tracing
Session Name : Microsoft Security Essentials OOBE
File name : C:Program DataMicrosoftMicrosoft Security EssentialssupportMSSEOOBE.etl
Error code : 3221225485
Event id :3
OpCode :stop
Keyword: session
Task category : session
I Found this error in event viewer.Generally OOBE is an xml file that supports facilities like deploying OEM and corporate customizations to windows welcome,ISP sign up etc.Below is the proof for this error,
Solution :
I found a very simple indirect solution for this problem.Just do what i followed in the below video.
See Also :
Programming error from C language
Microsoft security essentials oobe stopped
Session «Microsoft Security Essentials OOBE» stopped due to the following error:0xC000000D
Log name :Microsoft-windows-Kernel-EventTracing/Admin
Source : kernel event tracing
Session Name : Microsoft Security Essentials OOBE
File name : C:Program DataMicrosoftMicrosoft Security EssentialssupportMSSEOOBE.etl
Error code : 3221225485
Event id :3
OpCode :stop
Keyword: session
Task category : session
I Found this error in event viewer.Generally OOBE is an xml file that supports facilities like deploying OEM and corporate customizations to windows welcome,ISP sign up etc.Below is the proof for this error,
To know more about microsoft OOBE refer the following pages,
What is OOBE : http://technet.microsoft.com/en-us/library/dd744376(WS.10).aspx
How OOBE works : http://technet.microsoft.com/en-us/library/dd744258(WS.10).aspx
OOBE settings :http://technet.microsoft.com/en-us/library/dd744353(WS.10).aspx
Microsoft kernel event tracing log :
- Session «WFP-IPsec Diagnostics» failed to write to log file «C:/Windowssystem32wfpwfpdiag.etl» ith the following error :0xC000007F.
Additional details :
OPCODE :write buffer.
Source : kernel event tracing.
keywords : session.
task category : logging.
event id : 0.
- Session «WFP-IPSec Diagnostics» failed to start with the following error:0xC0000022.
Opcode: start.
event id : 2.
Google update : Network Request error
The desription for event id 20 from source google update cannot be found.Either the component that raises this event is not installed on your local computer or the installation is corrupted.You can install or repair the component on the local machine.
The local computer may not have the necessary registry information or message dll files to display message from a remote computer.you may be able to use the /AUXSOURCE=flag to retrieve this description.
The following information was included with the event,
Network request error
Error: 0x80072ee7.HTTP status code:0.
url=https://tools.google.com/service/update2
Trying config: source=browser name ,direct connection.
trying CUP:WinHTTP
send request returned 0x80072ee7.HTTP status code:0.
trying WinHTTP
send request returned 0x80072ee7.HTTP status code:0.
trying CUP:iexplore
send request returned 0x80004005.HTTP status code:0.
Trying config:source=IE,wpad=1,script=.
trying CUP:WinHTTP
send request returned 0x80072ee7.HTTP status code:0.
trying WinHTTP
send request returned 0x80072ee7.HTTP status code:0.
trying CUP:iexplore
…
….
…
Below is the proof for this error,
See Also :
windows update not working
Microsoft Antimalware has encountered an error
Microsoft Antimalware has encountered an error trying to update signatures.
Microsoft Antimalware is the service which helps protect users from malware and other potentially unwanted software.
New Signature Version : Not mentioned
Previous signature version :0.0.0.0
Update Source : Microsoft Update Server
Update stage : download
Source path : http://www.microsoft.com
Signature type : antivirus
Update Type : FULL
User : NT AUTHORITY/ SYSTEM
Current engine version : Not available
Previous engine version : 0.0.0.0
Error code : 0x80240022
Error description : The program can’t check for definition updates.
See Also :
windows update not working
Microsoft Antimalware has encountered an error
Microsoft Antimalware has encountered an error trying to update signatures.
Microsoft Antimalware is the service which helps protect users from malware and other potentially unwanted software.
New Signature Version : Not mentioned
Previous signature version :0.0.0.0
Update Source : Microsoft Update Server
Update stage : download
Source path : http://www.microsoft.com
Signature type : antivirus
Update Type : FULL
User : NT AUTHORITY/ SYSTEM
Current engine version : Not available
Previous engine version : 0.0.0.0
Error code : 0x80240022
Error description : The program can’t check for definition updates.
Solution : You can perform definition updates for microsoft security essentials from the following site
«http://definitionupdates.microsoft.com/download/DefinitionUpdates/x86/mpam-fe.exe » by installing mpam-fe.exe
For an event having error code 0x8024402c the error description was «An unexpected problem occurred while checking for updates«.For information on installing or troubleshooting updates, see help and support.Additional details includes update stage as search and event id as 2001.
There is also possible to occur microsoft antimalware error from the following sources with error codes as,
Update source : microsoft malware protection center
Error code : 0x80072ee7
Error description : The server name or address could not be resolved.
Update source : Microsoft update server.
Error code : 0x80072f78.
Error description : The server returned an invaid or unrecognized response.
Event id : 2001.
Error code : 0x80072ee2
Error description : The operation timed out.
solution : Check your internet connection and ensure it is not weak/slow or broken.
Recommended post :
Error code 0x80004005 microsoft antimalware
Program Compatibility Assistant Service Failed
The program compatibility assistant service failed to perform the phase two initialization.
Log name : system
source : microsoft windows application experience
keywords : 0x8000000000000000
event id : 205
I found this error from event viewer.But i cannot find any solution from Microsoft’s event log online help.
Generally,Program compatibility assistant service provides support for the program compatibility assistant which has been shortly called as PCA.This PCA monitors programs installed and run by the user and detects known compatibility problems.If this service is stopped then pca will not function properly.
I think this problem happens when PCA service found difficulties to perform initialization steps at different phase for the new application experienced.
If anyone have appropriate solution for this error then please post it as comments are tweet it.
Here is the proof which shows this error,
To know more about Program compatibility assistant visit pca wiki