Amd action authenticate sp ошибка

Looks like no one’s replied in a while. To start the conversation again, simply

ask a new question.

Error logging into App Store — AMD-Action:authenticate:SP

I just erased my hard drive to do a hard restore and when in the boot menu I am trying to reinstall OS X El Capitan. I select my HD as the drive to install on and it prompts me to log into the App Store. I enter my info and it begins to login and then I get the message «An unexpected error occurred while signing in. AMD-Action:authenticate:SP.»

I am stuck and have no way to boot my computer because the HD is wiped. Any suggestions to get past this?

MacBook,

OS X El Capitan (10.11.6)

Posted on Oct 3, 2016 11:23 AM

Error logging into App Store — AMD-Action:authenticate:SP

OS X El Capitan installation error: AMD-Action:authenticate:SP

When doing a clean re-installation of El Capitan (highest supported version) from a bootable USB on an older Mac (MBP, 15-inch, Late 2008), I get this error:

An unexpected error occured while signing in.

AMD-Action:authenticate:SP

The error shows up, while logging in with the Apple ID into the App Store in the installer.

  • I tried with different Apple IDs,

  • Also tried running these commands
    in the Recovery Terminal and restarting:

    csrutil clear

    csrutil enable

Solution 1:

The problem was that the old Mac did not have its date set correctly.

  1. Hold Option (ALT) + Command + R at Mac startup to start internet recovery

  2. Going into Utilities > Terminal starts the recovery terminal

  3. Run date mmddHHMMyy — this solves the problem (date must be in PST!)

  4. Run csrutil enable

  5. Run csrutil clear

  6. Exit the recovery terminal and continue OS X installation normally.

Here is the full step-by-step solution to solve the problem.

Solution 2:

For me, the problem was because I did not have access to the Shared folder under Users in the primary drive. When i changed permission for the Shared folder via ‘Get Info>Folder permission>Set to read’, the problem was resolved..

Hope this helps

apple-idinstallmacosusb

When doing a clean re-installation of El Capitan (highest supported version) from a bootable USB on an older Mac (MBP, 15-inch, Late 2008), I get this error:

An unexpected error occured while signing in.

AMD-Action:authenticate:SP

The error shows up, while logging in with the Apple ID into the App Store in the installer.

  • I tried with different Apple IDs,

  • Also tried running these commands
    in the Recovery Terminal and restarting:

    csrutil clear

    csrutil enable

Best Answer

The problem was that the old Mac did not have its date set correctly.

  1. Hold Option (ALT) + Command + R at Mac startup to start internet recovery

  2. Going into Utilities > Terminal starts the recovery terminal

  3. Run date mmddHHMMyy — this solves the problem (date must be in PST!)

  4. Run csrutil enable

  5. Run csrutil clear

  6. Exit the recovery terminal and continue OS X installation normally.

Here is the full step-by-step solution to solve the problem.

Related Solutions

MacOS – Mac OSX – Install Failed

The Genius Bar will reinstall your OS and/or diagnose any potential hardware problems at no charge regardless of warranty status. The only time they will require a fee is if your Mac is indeed out of warranty and requires a hardware repair, at which time you would need to pay in order to have the repair performed.

If visiting an Apple store is an option for you then by all means don’t let your warranty status stop you from visiting. They should be able to install 10.6 since it came with your Mac and/or 10.8 if you can show proof of purchase for it.

For the actual question, you can view the log file while performing the installation under either File > View Log or View > Log, I don’t have an install in progress at the moment to reference. One of those should show you the log from the installation which would hopefully give you a reference as to what part of the installation failed.

MacBook – Samsung V-Nand SSD 850 EVO 1TB not working

I found the ususal 8GB USB drive was not large enough and only got El Capitan to boot from USB of 16GB or more!

You can see what is happening when you boot the mac using Verbose mode like so:

Right upon hearing the startup chime, press and hold the Command (⌘) – V key combination for Verbose Mode.

As the Mac boots it will spit out lines of code:

You may be able to see whta the problem is from this, or come back and type in teh last few lines fro us to read. Or take a pic with your phone and post that!

This is most likely a temporary glitch at Apple’s end.

I’m aware of a number of users who have received the exact same error message during the past few hours while trying to authenticate (i.e. login) with the Mac App Store. In all cases, they were just trying to install updates (not upgrade macOS).

The error basically means that Apple’s servers can’t authenticate your account. I’m not sure if location is an issue, but in my case the users are based in Australia.

I imagine it’ll be resolved reasonably quickly, so I would wait and try again tomorrow.

Вопрос

При выполнении чистой переустановки El Capitan (самая последняя поддерживаемая версия) с загрузочного USB на старом Mac (MBP, 15 дюймов, конец 2008 года) я получаю эту ошибку:

При входе в систему произошла непредвиденная ошибка.

AMD-Action:authenticate:SP

Ошибка появляется при входе с помощью Apple ID в App Store в программе установки.

  • Я пробовал с разными Apple ID,

  • Также попробовал выполнить эти команды
    в терминале восстановления и перезагрузиться:

    csrutil clear

    csrutil enable

9
2017-02-22T09:41:56+00:00
3

Peter Gerhat

Ответ на вопрос

22-го февраля 2017 в 1:48

2017-02-22T13:48:41+00:00

#21594154

Проблема заключалась в том, что на старом Mac не была правильно установлена дата.

  1. Удерживайте Option (ALT) + Command + R при запуске Mac, чтобы запустить восстановление Интернета.

  2. Зайдите в Утилиты > Терминал и запустите терминал восстановления.

  3. Запустите date mmddHHHMMyy — это решит проблему (дата должна быть в PST!).

  4. Запустите csrutil enable.

  5. Запустите csrutil clear.

  6. Выйдите из терминала восстановления и продолжите установку OS X в обычном режиме.

Здесь приведено полное пошаговое решение для решения проблемы.

 Rems

Ответ на вопрос

31-го августа 2017 в 2:30

2017-08-31T14:30:53+00:00

#21594155

Для меня проблема заключалась в том, что у меня не было доступа к папке Shared в разделе Users на основном диске. Когда я изменил разрешение для папки Shared через ‘Get Info>Folder permission>Set to read’, проблема была решена…

Надеюсь, это поможет

 Jubei

Ответ на вопрос

1-го июня 2019 в 12:50

2019-06-01T12:50:46+00:00

#21594156

Скорее всего, это связано с двухфакторной аутентификацией. Я получал это сообщение об ошибке при попытке загрузить MacOS High-Sierra с установки El-Capitan. Проблема решилась тем, что я сначала загрузил что-то другое из магазина приложений. Затем меня попросили пройти аутентификацию с помощью tfa, после чего мне разрешили загрузить macos.

Понравилась статья? Поделить с друзьями:
  • Alien isolation ошибка при установке
  • Alien isolation не запускается выдает ошибку
  • Alien isolation digital deluxe edition ошибка 0xc0000906
  • Alice madness returns ошибка при запуске
  • Alice madness returns исправление ошибок